The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
A review of salt hydrates for seasonal heat storage in domestic applications
Open accessAbstract
A literature review is performed in order to collect and analyse the thermodynamic data of an utmost number of salt hydrate reactions (i.e., 563 reactions are reviewed). These data allow us to evaluate the theoretical possibilities and limitations of salt hydrates as thermochemical materials (TCMs) for seasonal heat storage in the built environment (1GJ/m3 on system level). Two filters are used for evaluation. Filter 1 including three criteria i.e., an ideal hydration reaction with a capacity larger than 2GJ/m3, a hydration temperature of 65°C (suitable for domestic hot water) or higher, a dehydration temperature below 100°C to profit as much as possible from the solar heat that can be harvested. Only four of the studied hydrates fit with these demands. For selecting a larger number of hydrates, a second filter is introduced with less demanding constraints. It is expected that modifications on heat storage system level are needed to reach an acceptable system performance with the hydrates selected through filter 2 (hydration reaction with a capacity larger than 1.3GJ/m3, a hydration temperature of 50°C or higher, a dehydration temperature below 120°C). Based on this filter, a shortlist of 25 TCM hydrate reactions are identified, including the four of filter 1. The shortlist is analyzed by considering price, chemical stability, reaction kinetics and safety for domestic environment. Based on this additional analysis with the used constraints, K2CO3 is determined to be the most promising candidate for open or closed systems, but has a low energy density. Based on the review of 563 hydrate reactions, we concluded that no ideal salt exists for seasonal heat storage under the considered boundary conditions. With the current concept of seasonal heat storage, including closed and open systems, whereby only one dehydration cycle per year is performed under a system energy density of 1GJ/m3, it is not realistic for large scale implementation to use pure salt hydrates as heat storage material. By adjusting the constraints, such as multiple cycles per year or higher water vapor pressures, salt hydrates can still be used as TCMs. It should be mentioned that MgSO4·7H2O, MgSO4·6H2O and CaCl2·6H2O are not listed in our shortlist of 25 TCMs, although these hydrates are commonly suggested in the literature as promising TCM for seasonal heat storage. The present study on pT-characteristics shows, however, that these salts are not fitting the demands of such a heat storage system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Humidity fixed points of binary saturated aqueous solutions
Greenspan, L. (1977) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.081a.011 · Cited by 4,001
The Electrical Resistance of Binary Metallic Mixtures
Landauer, R. (1952) · Journal of Applied Physics · doi:10.1063/1.1702301 · Cited by 1,928
A Fundamental Equation of State for Heavy Water
Hill, P. G., MacMillan, R. D. C., & Lee, V. (1982) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555661 · Cited by 1,503
The NBS tables of chemical thermodynamic properties
Churney, C. M. (1982) · Journal of Physical and Chemical Reference Data · Cited by 980
International Critical Tables of Numerical Data, Physics, Chemistry and Technology
(1930) · National Academies Press eBooks · doi:10.17226/20230 · Cited by 978
Saturated Salt Solutions for Static Control of Relative Humidity between 5° and 40° C.
Rockland, L. B. (1960) · Analytical Chemistry · doi:10.1021/ac60166a055 · Cited by 775
A review on long-term sorption solar energy storage
N’Tsoukpoe, K. E., Liu, H., Le Pierrès, N., & Luo, L. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.05.008 · Cited by 663
Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review
Miró, L., Gasia, J., & Cabeza, L. F. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.147 · Cited by 640
Risk assessment of chemicals : an introduction
van Leeuwen, K., & Vermeire, T. G. (2007) · Springer eBooks · Cited by 577
Pinel, P., Cruickshank, C. A., Beausoleil-Morrison, I., & Wills, A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.04.013 · Cited by 536
Steiger, M., & Asmussen, S. (2008) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2008.05.053 · Cited by 415
A review of promising candidate reactions for chemical heat storage
Yan, T., Wang, R. Z., Li, T. X., Wang, L. W., & Fred, I. T. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.015 · Cited by 386
N’Tsoukpoe, K. E., Schmidt, T., Rammelberg, H. U., Watts, B. A., & Ruck, W. K. L. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.053 · Cited by 383
Scapino, L., Zondag, H. A., Van Bael, J., Diriken, J., & Rindt, C. C. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.148 · Cited by 376
Characterization of MgSO4 Hydrate for Thermochemical Seasonal Heat Storage
van Essen, V. M., Zondag, H. A., Gores, J. C., Bleijendaal, L. P. J., Bakker, M., Schuitema, R., van Helden, W. G. J., He, Z., & Rindt, C. C. M. (2009) · Journal of Solar Energy Engineering · doi:10.1115/1.4000275 · Cited by 291
Hydrogen Sulfide—Mechanisms of Toxicity and Development of an Antidote
Jiang, J., Chan, A., Ali, S., Saha, A., Haushalter, K. J., Lam, W.-L. M., Glasheen, M., Parker, J., Brenner, M., Mahon, S. B., et al. (2016) · Scientific Reports · doi:10.1038/srep20831 · Cited by 291
Prototype thermochemical heat storage with open reactor system
Zondag, H., Kikkert, B., Smeding, S., Boer, R. D., & Bakker, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.082 · Cited by 280
Michel, B., Mazet, N., Mauran, S., Stitou, D., & Xu, J. (2012) · Energy · doi:10.1016/j.energy.2012.09.029 · Cited by 226
Criado, Y. A., Alonso, M., & Abánades, J. C. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie404246p · Cited by 214
Closed and open thermochemical energy storage: Energy- and exergy-based comparisons
Abedin, A. H., & Rosen, M. A. (2011) · Energy · doi:10.1016/j.energy.2011.06.034 · Cited by 211
Michel, B., Neveu, P., & Mazet, N. (2014) · Energy · doi:10.1016/j.energy.2014.05.097 · Cited by 196
Schmidt, M., Szczukowski, C., Roßkopf, C., Linder, M., & Wörner, A. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.09.020 · Cited by 196
Calorimetric studies of thermochemical heat storage materials based on mixtures of MgSO4 and MgCl2
Posern, K., & Kaps, C. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.02.009 · Cited by 150
Experimental studies for the cyclability of salt hydrates for thermochemical heat storage
Donkers, P. A. J., Pel, L., & Adan, O. C. G. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.11.005 · Cited by 138
Self-citationRammelberg, H., Schmidt, T., & Ruck, W. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.11.043 · Cited by 136
Risk assessment of chemicals: an introduction
Power, M. J., & Lanno, R. P. (1997) · Aquatic Toxicology · doi:10.1016/s0166-445x(96)00829-6 · Cited by 135
Molenda, M., Stengler, J., Linder, M., et al. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.03.020 · Cited by 130
Characterization of Salt Hydrates for Compact Seasonal Thermochemical Storage
van Essen, V. M., Gores, J. C., Bleijendaal, L. P. J., Zondag, H. A., Schuitema, R., Bakker, M., & van Helden, W. G. J. (2009) · ASME International Conference on Energy Sustainability (ES) · doi:10.1115/es2009-90289 · Cited by 121
Michel, B., Mazet, N., & Neveu, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.108 · Cited by 110
Effect of kinetics on the thermal performance of a sorption heat storage reactor
Gaeini, M., Zondag, H. A., & Rindt, C. C. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.055 · Cited by 105
Thermal decomposition of metal nitrates and their hydrates
Mu, J., & Perlmutter, D. D. (1982) · Thermochimica Acta · doi:10.1016/0040-6031(82)87033-0 · Cited by 96
Experimental Studies of the Mechanism and Kinetics of Hydration Reactions
Linnow, K., Niermann, M., Bonatz, D., Posern, K., & Steiger, M. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.02.046 · Cited by 96
Water Transport in MgSO4·7H2O During Dehydration in View of Thermal Storage
Donkers, P. A. J., Beckert, S., Pel, L., Stallmach, F., Steiger, M., & Adan, O. C. G. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b08730 · Cited by 83
Self-citationGlasser, L. (2014) · Journal of Chemical & Engineering Data · doi:10.1021/je401077x · Cited by 81
Chou, I., Seal, R. R., & Hemingway, B. S. (2002) · American Mineralogist · doi:10.2138/am-2002-0112 · Cited by 80
Kinetic analysis of thermal dehydration and hydrolysis of MgCl2·6H2O by DTA and TG
Kirsh, Y., Yariv, S., & Shoval, S. (1987) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912692 · Cited by 67
Thermal conductivity measurement of thermochemical storage materials
Fopah‐Lele, A., N’Tsoukpoe, K. E., Osterland, T., Kuznik, F., & Ruck, W. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.06.077 · Cited by 65
Humidity controlled calorimetric investigation of the hydration of MgSO4 hydrates
Posern, K., & Kaps, C. (2008) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8640-4 · Cited by 55
Aristov, Y. I., Marco, G. D., Tokarev, M. M., & Parmon, V. N. (1997) · Reaction Kinetics and Catalysis Letters · doi:10.1007/bf02477527 · Cited by 51
Collins, E. M., & Menzies, A. W. C. (1936) · The Journal of Physical Chemistry · doi:10.1021/j150372a010 · Cited by 35
Dampfdruckmessungen des Systems Calciumchlorid–Wasser
Lannung, A. (1936) · Zeitschrift für anorganische und allgemeine Chemie · doi:10.1002/zaac.19362280102 · Cited by 34
The water vapour equilibria over magnesium perchlorate hydrates
Besley, L. M., & Bottomley, G. A. (1969) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(69)90032-9 · Cited by 30
Determination of goslarite–bianchite equilibria by the humidity-buffer technique at 0.1 MPa
Chou, I., & Seal, R. R. (2004) · Chemical Geology · doi:10.1016/j.chemgeo.2004.06.047 · Cited by 30
Cited by
Hou, Y., Sheng, Z., Fu, C., Kong, J., & Zhang, X. (2022) · Nature Communications · doi:10.1038/s41467-022-28906-4 · Cited by 459
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Nguyen, M. H., Zbair, M., Dutournié, P., Gervasini, A., Vaulot, C., & Bennici, S. (2022) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2022.111696 · Cited by 52
Kouchachvili, L., Bardy, D. A., Djebbar, R., & Hogg, L. E. W. (2023) · Journal of Porous Materials · doi:10.1007/s10934-022-01277-3 · Cited by 33
Nguyen, M. H., Zbair, M., Dutournié, P., Limousy, L., & Bennici, S. (2023) · Molecules · doi:10.3390/molecules28145381 · Cited by 8
Metadata
- Authors
- Donkers, P. A. J., Sögütoglu, L. C., Huinink, H. P., Fischer, H. R., & Adan, O. C. G.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-08
- Volume
- 199
- Pages
- 45-68
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2612583564
- Cited by
- 403
- References
- 43
- FWCI
- 19.41
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.