The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Electrically conductive filament for 3D-printed circuits and sensors
Open accessAbstract
• 3D printable polypropylene-based conductive filament (<0.01 Ω m) has been achieved. • Electrical and UV stress tests demonstrated stability of printed conductors. • Practical plastic thermometer and flex sensor were 3D printed. 3D printing is a unique technology that potentially offers a high degree of freedom for the customization of practical products that incorporate electrical components, such as sensors in wearable applications. The availability of inexpensive, reliable, electrically conductive material will be indispensable in the fabrication of such circuits and sensors before the full potential of 3D printing for customized products incorporating electrical elements can be realized. To date, 3D printable conductive filaments with sufficiently high conductivities to fabricate practical circuits remain lacking for fused deposition modeling. Herein, we describe the fabrication, characterization, stress testing, and application of a low-cost thermoplastic conductive composite that has been processed into filament form for 3D printing. Results from stress tests show that the electrical properties of our composites are stable under exposure to sunlight over 1 month and there was no observable degradation in electrical resistance when used at 12 V (AC) for 7 days. Practical circuits were 3D printed using filaments with resistivity of ∼5 × 10 −3 Ω m, and powered up with a 9 V battery. A plastic thermometer and a flex sensor were prototyped to illustrate the potential of this material for sensing applications, for example, in customized wearables.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
A review and analysis of electrical percolation in carbon nanotube polymer composites
Bauhofer, W., & Kovacs, J. Z. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.06.018 · Cited by 2,741
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Carbon black filled conducting polymers and polymer blends
Huang, J. (2002) · Advances in Polymer Technology · doi:10.1002/adv.10025 · Cited by 850
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites
TIBBETTS, G., LAKE, M., STRONG, K., & RICE, B. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.015 · Cited by 632
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
Walker, S. B., & Lewis, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209267c · Cited by 459
Cited by
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
Fico, D., Rizzo, D., Casciaro, R., & Esposito Corcione, C. (2022) · Polymers · doi:10.3390/polym14030465 · Cited by 265
Metadata
- Authors
- Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 9
- Pages
- 167-175
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2735039999
- Cited by
- 332
- References
- 22
- FWCI
- 12.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrically conductive filament for 3D-printed circuits and sensors. https://app.cochat.ai/papers/10.1016/j.apmt.2017.07.001
- The paper
- Kwok, S. W., Goh, K. H. H., Tan, Z. D., Tan, S. T. M., Tjiu, W. W., Soh, J. Y., Ng, Z. J. G., Chan, Y. Z., Hui, H. K., & Goh, K. E. J. (2017). Electrically conductive filament for 3D-printed circuits and sensors. Applied Materials Today. https://doi.org/10.1016/j.apmt.2017.07.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.