The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Surface modification of activated carbons for CO2 capture
Open accessAbstract
The reduction of anthropogenic CO2 emissions to address the consequences of climate change is a matter of concern for all developed countries. In the short term, one of the most viable options for reducing carbon emissions is to capture and store CO2 at large stationary sources. Adsorption with solid sorbents is one of the most promising options. In this work, two series of materials were prepared from two commercial activated carbons, C and R, by heat treatment with gaseous ammonia at temperatures in the 200–800 °C range. The aim was to improve the selectivity and capacity of the sorbents to capture CO2, by introducing basic nitrogen-functionalities into the carbons. The sorbents were characterised in terms of texture and chemical composition. Their surface chemistry was studied through temperature-programmed desorption tests and X-ray photoelectron spectroscopy. The capture performance of the carbons was evaluated by using a thermogravimetric analyser to record mass uptakes by the samples when exposed to a CO2 atmosphere.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
The characterization of activated carbons with oxygen and nitrogen surface groups
Biniak, S., Szymański, G., Siedlewski, J., & Świątkowski, A. (1997) · Carbon · doi:10.1016/s0008-6223(97)00096-1 · Cited by 1,513
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Estimation of the point of zero charge of simple oxides by mass titration
Noh, J. S., & Schwarz, J. A. (1989) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(89)90086-6 · Cited by 919
XPS of nitrogen-containing functional groups on activated carbon
Jansen, R. J. J., & van Bekkum, H. (1995) · Carbon · doi:10.1016/0008-6223(95)00030-h · Cited by 867
Seaton, N. A., Walton, J. P. R. B., & quirke, N. (1989) · Carbon · doi:10.1016/0008-6223(89)90035-3 · Cited by 765
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Chemistry and physics of carbon
Somasundaran, P., & Xiao, L. (1990) · Colloids and Surfaces · doi:10.1016/0166-6622(90)80207-k · Cited by 539
CO2 capture by adsorption with nitrogen enriched carbons
Plaza, M. G., Pevida, C., Arenillas, A., Rubiera, F., & Pis, J. J. (2007) · Fuel · doi:10.1016/j.fuel.2007.06.001 · Cited by 505
Self-citationTerzyk, A. P. (2001) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(00)00594-x · Cited by 499
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217
A review on surface modification of activated carbon for carbon dioxide adsorption
Shafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Shamiri, A. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.07.006 · Cited by 1,128
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Chemical tuning of CO2 sorption in robust nanoporous organic polymers
Dawson, R., Adams, D. J., & Cooper, A. I. (2011) · Chemical Science · doi:10.1039/c1sc00100k · Cited by 568
Songolzadeh, M., Soleimani, M., Takht Ravanchi, M., & Songolzadeh, R. (2014) · The Scientific World Journal · doi:10.1155/2014/828131 · Cited by 478
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
An overview of activated carbons utilization for the post-combustion carbon dioxide capture
Rashidi, N. A., & Yusup, S. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.11.002 · Cited by 394
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Li, Q., Yang, J., Feng, D., Wu, Z., Wu, Q., Park, S. S., Ha, C.-S., & Zhao, D. (2010) · Nano Research · doi:10.1007/s12274-010-0023-7 · Cited by 369
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
Self-citationCO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Chitosan derived nitrogen-doped microporous carbons for high performance CO2 capture
Fan, X., Zhang, L., Zhang, G., Shu, Z., & Shi, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.026 · Cited by 345
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03534c · Cited by 334
Self-citationShafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Arami-Niya, A. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.11.127 · Cited by 328
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Self-citationHighly selective CO2 capture by S-doped microporous carbon materials
Seema, H., Kemp, K. C., Le, N. H., Park, S.-W., Chandra, V., Lee, J. W., & Kim, K. S. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.006 · Cited by 277
Development of hybrid amine-functionalized MCM-41 sorbents for CO2 capture
Wang, X., Chen, L., & Guo, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.107 · Cited by 275
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Regeneration of carbonaceous adsorbents. Part I: Thermal Regeneration
Salvador, F., Martin-Sanchez, N., Sanchez-Hernandez, R., Sanchez-Montero, M. J., & Izquierdo, C. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.02.045 · Cited by 267
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Toward a molecular design of porous carbon materials
Borchardt, L., Zhu, Q.-L., Casco, M. E., Berger, R., Zhuang, X., Kaskel, S., Feng, X., & Xu, Q. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.002 · Cited by 266
Zhang, Y.-J., Xing, Z.-J., Duan, Z.-K., Li, M., & Wang, Y. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.07.126 · Cited by 262
Activated carbon as catalyst support: precursors, preparation, modification and characterization
Iwanow, M., Gärtner, T., Sieber, V., & König, B. (2020) · Beilstein Journal of Organic Chemistry · doi:10.3762/bjoc.16.104 · Cited by 229
Gasification biochar from biowaste (food waste and wood waste) for effective CO2 adsorption
Igalavithana, A. D., Choi, S. W., Dissanayake, P. D., Shang, J., Wang, C.-H., Yang, X., Kim, S., Tsang, D. C. W., Lee, K. B., & Ok, Y. S. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121147 · Cited by 225
Zhao, Y., Liu, X., Yao, K. X., Zhao, L., & Han, Y. (2012) · Chemistry of Materials · doi:10.1021/cm303072n · Cited by 221
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2013.06.007 · Cited by 195
CO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Shi, S., & Liu, Y. (2021) · Fuel · doi:10.1016/j.fuel.2021.121762 · Cited by 136
Zhang, X., Zhang, S., Yang, H., Shao, J., Chen, Y., Feng, Y., Wang, X., & Chen, H. (2015) · Energy · doi:10.1016/j.energy.2015.08.028 · Cited by 109
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Self-citationZhang, X., Wu, J., Yang, H., Shao, J., Wang, X., Chen, Y., Zhang, S., & Chen, H. (2016) · RSC Advances · doi:10.1039/c6ra23748g · Cited by 95
Zeng, W., & Bai, H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.041 · Cited by 65
Olivares-Marín, M., García, S., Pevida, C., Wong, M. S., & Maroto-Valer, M. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2011.06.031 · Cited by 41
Self-citationEvaluation of the cyclic capacity of low-cost carbon adsorbents for post-combustion CO2 capture
Plaza, M. G., Pevida, C., Pis, J. J., & Rubiera, F. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.178 · Cited by 33
Self-citation
Metadata
- Authors
- Pevida, C., Plaza, M. G., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2008-09
- Volume
- 254
- Issue
- 22
- Pages
- 7165-7172
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2034125330
- Cited by
- 468
- References
- 28
- FWCI
- 46.23
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.