The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
XPS investigation of monatomic and cluster argon ion sputtering of tantalum pentoxide
Open accessAbstract
In recent years, gas cluster ion beams (GCIB) have become the cutting edge of ion beam technology to sputter etch organic materials in surface analysis. However, little is currently known on the ability of argon cluster ions (Ar n + ) to etch metal oxides and other technologically important inorganic compounds and no depth profiles have previously been reported. In this work, XPS depth profiles through a certified (European standard BCR-261T) 30 nm thick Ta 2 O 5 layer grown on Ta foil using monatomic Ar + and Ar 1000 + cluster ions have been performed at different incident energies. The preferential sputtering of oxygen induced using 6 keV Ar 1000 + ions is lower relative to 3 keV and 500 eV Ar + ions. Ar + ions exhibit a steady state O/Ta ratio through the bulk oxide but Ar 1000 + ions show a gradual decrease in the O/Ta ratio as a function of depth. The depth resolution and etch rate is substantially better for the monatomic beam compared to the cluster beam. Higher O concentrations are observed when the underlying Ta bulk metal is sputtered for the Ar 1000 + profiles compared to the Ar + profiles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SRIM – The stopping and range of ions in matter (2010)
Ziegler, J. F., Ziegler, M. D., & Biersack, J. P. (2010) · Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms · doi:10.1016/j.nimb.2010.02.091 · Cited by 11,412
Tantalum pentoxide (Ta2O5) thin films for advanced dielectric applications
Chaneliere, C., Autran, J. L., Devine, R. A. B., & Balland, B. (1998) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(97)00023-5 · Cited by 678
Cluster secondary ion mass spectrometry of polymers and related materials
Mahoney, C. M. (2010) · Mass Spectrometry Reviews · doi:10.1002/mas.20233 · Cited by 293
Preferential sputtering of oxides: A comparison of model predictions with experimental data
Malherbe, J. B., Hofmann, S., & Sanz, J. M. (1986) · Applied Surface Science · doi:10.1016/0169-4332(86)90139-x · Cited by 258
Ezhilvalavan, S., & Tseng, T. Y. (1999) · Journal of Materials Science: Materials in Electronics · doi:10.1023/a:1008970922635 · Cited by 159
Comparison of the sputter rates of oxide films relative to the sputter rate of SiO2
Baer, D. R., Engelhard, M., Lea, S., Nachimuthu, P., Droubay, T. C., Kim, J., Lee, B., Mathews, C., Opila, R. L., Saraf, L. V., et al. (2010) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.3456123 · Cited by 152
XPS depth-profile of the suboxide distribution at the native oxide/Ta interface
Khanuja, M., Sharma, H., Mehta, B. R., et al. (2008) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/j.elspec.2008.10.004 · Cited by 103
Research works printed but not linked: 23
- Joshi, 1999, Influence of postdeposition annealing on the enhanced structural and electrical properties of amorphous and crystalline Ta2O5 thin films for dynamic random access memory applications, J. Appl. Phys., 86, 871, 10.1063/1.370817 · doi:10.1063/1.370817
- Zhang, 2012, Thickness-dependence of optical constants for Ta2O5 ultrathin films, Appl. Phys. A, 108, 975, 10.1007/s00339-012-7007-2 · doi:10.1007/s00339-012-7007-2
- Wild, 1989, Ion sputter rates of Cr–Mn–Fe spinel oxides, Surf. Interface Anal., 14, 239, 10.1002/sia.740140505 · doi:10.1002/sia.740140505
- Hofmann, 1982, Quantitative XPS analysis of the surface layer of anodic oxides obtained during depth profiling by sputtering with 3keV Ar+ ions, J. Trace Microprobe Technol., 1, 213
- Holloway, 1979, Preferential sputtering of Ta2O5 by argon ions, J. Vac. Sci. Technol., 16, 793, 10.1116/1.570088 · doi:10.1116/1.570088
- Medicherla, 2010, Formation of self-organized Ta nano-structures by argon ion sputtering of Ta foil: XPS and AFM study, J. Electron Spectrosc. Relat. Phenom., 180, 1, 10.1016/j.elspec.2010.02.006 · doi:10.1016/j.elspec.2010.02.006
- Benito, 2015, Nanostructuring of Ta2O5 surfaces by low energy Ar+ bombardment, Appl. Surf. Sci., 351, 753, 10.1016/j.apsusc.2015.05.143 · doi:10.1016/j.apsusc.2015.05.143
- Barlow, 2014, Observed damage during argon gas cluster depth profiles of compound semiconductors, J. Appl. Phys., 116, 5, 10.1063/1.4892097 · doi:10.1063/1.4892097
- Sano, 2016, Optimal conditions for gas cluster ion beams in studying inorganic interface species: improved chemical information at a ZnO interface, Surf. Interface Anal., 48, 575, 10.1002/sia.5949 · doi:10.1002/sia.5949
- Steinberger, 2015, XPS study of the effects of long term Ar+ ion and Ar cluster sputtering on the chemical degradation of hydrozincite and iron oxide, Corros. Sci., 99, 66, 10.1016/j.corsci.2015.06.019 · doi:10.1016/j.corsci.2015.06.019
- Aureau, 2016, Advanced analysis tool for X-ray photoelectron spectroscopy profiling: cleaning of perovskite SrTiO3 oxide surface using argon cluster ion source, Thin Solid Films, 601, 89, 10.1016/j.tsf.2015.11.017 · doi:10.1016/j.tsf.2015.11.017
- Grilli, 2014, Comparison of Ar+ monoatomic and cluster ion sputtering of Ta2O5 at different ion energies, by XPS: part 2—cluster ions, Surf. Sci. Spectra, 21, 68, 10.1116/11.20140702 · doi:10.1116/11.20140702
- Grilli, 2014, Comparison of Ar+ monoatomic and cluster ion sputtering of Ta2O5 at different ion energies, by XPS: part 1—monoatomic ions, Surf. Sci. Spectra, 21, 50, 10.1116/11.20140701 · doi:10.1116/11.20140701
- Aoki, 2009, Study of density effect of large gas cluster impact by molecular dynamics simulations, Nucl. Instrum. Methods Phys. Res. Sect. B: Beam Interact. Mater. At., 267, 2999, 10.1016/j.nimb.2009.06.019 · doi:10.1016/j.nimb.2009.06.019
- Malherbe, 1999, Ion sputtering, surface topography, SPM and surface analysis of electronic materials, Appl. Surf. Sci., 144–145, 192, 10.1016/S0169-4332(98)00796-X · doi:10.1016/s0169-4332(98)00796-x
- Yamada, 2000, Nucl. Instrum. Methods Phys. Res. B, 164–165, 944, 10.1016/S0168-583X(99)01163-5 · doi:10.1016/s0168-583x(99)01163-5
- Cleveland, 1992, Dynamics of cluster-surface collisions, Science, 257, 355, 10.1126/science.257.5068.355 · doi:10.1126/science.257.5068.355
- Cheng, 2009, Molecular dynamics simulations of argon cluster impacts on a nickel film surface, Nucl. Instrum. Methods Phys. Res. B, 267, 1428, 10.1016/j.nimb.2009.01.056 · doi:10.1016/j.nimb.2009.01.056
- Musumeci, 2016, Spectroscopic evidences of high temperatures and pressures during the cluster ion beam interaction with solid surfaces, J. Lumin., 172, 224, 10.1016/j.jlumin.2015.12.018 · doi:10.1016/j.jlumin.2015.12.018
- Seah, 2016, Sampling depths, depth shifts, and depth resolutions for Bin+ ion analysis in argon gas cluster depth profiles, J. Am. Soc. Mass Spectrom., 27, 1411, 10.1007/s13361-016-1401-5 · doi:10.1007/s13361-016-1401-5
- Huatala, 2004, IEEE 4th International Workshop on Junction Technology, 50
- Kelly, 1993, Composition changes in bombarded oxides and carbides: the distinction between ballistic, chemically guided, and chemically random behaviour, Nucl. Instrum. Methods Phys. Res. B, 80/81, 1154, 10.1016/0168-583X(93)90755-U · doi:10.1016/0168-583x(93)90755-u
- Klein, 1972, Oxidation state of anodic tantalum oxide after heat treatment. I. Galvanostatic method as applied after heating in vacuum, J. Electrochem. Soc., 119, 1551, 10.1149/1.2404041 · doi:10.1149/1.2404041
Cited by
Wang, Z., Li, M., Yu, J., Ge, X., Liu, Y., & Wang, W. (2020) · Advanced Materials · doi:10.1002/adma.201906384 · Cited by 138
Kim, G., Son, S., Song, H., Jeon, J. B., Lee, J., Cheong, W. H., Choi, S., & Kim, K. M. (2023) · Advanced Science · doi:10.1002/advs.202205654 · Cited by 72
Metadata
- Authors
- Simpson, R., White, R. G., Watts, J. F., & Baker, M. A.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 405
- Pages
- 79-87
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2582447532
- Cited by
- 297
- References
- 7
- FWCI
- 16.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by/4.0/ (vor)
- Funders
- Thermo Scientific
- University of Surrey
- Engineering and Physical Sciences Research Council (EP/G037388/1)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.