The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Mesh reinforcing method for 3D Concrete Printing
Abstract
Abstract 3D Concrete Printing (3DcP) is an emerging technology with promises to transform concrete construction using additive manufacturing technologies. One of the major challenges for 3DcP technology is the reinforcement method, particularly in the interlayer direction (across the layers). Previously developed methods include (1) pre-installed reinforcement where the reinforcement is placed or 3D printed before the concrete printing and (2) post-installed reinforcement where reinforcement is inserted and grouted after the 3D printing of concrete with holes for the reinforcements. A new in-process method is presented in this paper to embed mesh reinforcement at the same time when concrete layers are printed. Reinforcements in each layer are lapped in the interlayer (across the layer) direction to simulate a continuous reinforcement. Tests and calculations show that lapped mesh reinforcement was effective in functioning as a continuous reinforcement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Cited by
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Recent advances in the concrete industry to reduce its carbon dioxide emissions
Adesina, A. (2020) · Environmental Challenges · doi:10.1016/j.envc.2020.100004 · Cited by 384
Metadata
- Authors
- Marchment, T., & Sanjayan, J.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 109
- Pages
- 102992
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W2982239641
- Cited by
- 347
- References
- 2
- FWCI
- 18.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mesh reinforcing method for 3D Concrete Printing. https://app.cochat.ai/papers/10.1016/j.autcon.2019.102992
- The paper
- Marchment, T., & Sanjayan, J. (2020). Mesh reinforcing method for 3D Concrete Printing. Automation in Construction. https://doi.org/10.1016/j.autcon.2019.102992
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
