The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Mesh reinforcing method for 3D Concrete Printing
Abstract
Abstract 3D Concrete Printing (3DcP) is an emerging technology with promises to transform concrete construction using additive manufacturing technologies. One of the major challenges for 3DcP technology is the reinforcement method, particularly in the interlayer direction (across the layers). Previously developed methods include (1) pre-installed reinforcement where the reinforcement is placed or 3D printed before the concrete printing and (2) post-installed reinforcement where reinforcement is inserted and grouted after the 3D printing of concrete with holes for the reinforcements. A new in-process method is presented in this paper to embed mesh reinforcement at the same time when concrete layers are printed. Reinforcements in each layer are lapped in the interlayer (across the layer) direction to simulate a continuous reinforcement. Tests and calculations show that lapped mesh reinforcement was effective in functioning as a continuous reinforcement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2026) · Materials science forum · doi:10.4028/www.scientific.net/msf · Cited by 2,250
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Self-citationFresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Nerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
3D printing of reinforced concrete elements: Technology and design approach
Asprone, D., Auricchio, F., Menna, C., & Mercuri, V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.018 · Cited by 413
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Method of formulating geopolymer for 3D printing for construction applications
Xia, M., & Sanjayan, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.136 · Cited by 359
Self-citationMechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 332
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Self-citationMarchment, T., Sanjayan, J., & Xia, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107684 · Cited by 281
Self-citationExperimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Ma, G., Li, Z., Wang, L., & Bai, G. (2019) · Materials Letters · doi:10.1016/j.matlet.2018.09.159 · Cited by 196
Development of a Viable Concrete Printing Process
Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S., Gibb, A., & Thorpe, T. (2011) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2011/0124 · Cited by 192
Hosseini, E., Zakertabrizi, M., Korayem, A. H., & Xu, G. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.008 · Cited by 172
Development of the construction processes for reinforced additively constructed concrete
Kreiger, E. L., Kreiger, M. A., & Case, M. P. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.015 · Cited by 147
Properties of 3D-Printed Fiber-Reinforced Portland Cement Paste
Hambach, M., Rutzen, M., & Volkmer, D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00005-1 · Cited by 121
3D Printing Concrete with Reinforcement
Bos, F. P., Ahmed, Z., Wolfs, R. J. M., & Salet, T. A. M. (2017) · Springer eBooks · doi:10.1007/978-3-319-59471-2_283 · Cited by 114
3D Concrete Printing for Construction Applications
Sanjayan, J., & Nematollahi, B. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00001-4 · Cited by 114
Self-citationRheological Property Criteria for Buildable 3D Printing Concrete
Jeong, H., Han, S., Choi, S., Lee, Y. J., Yi, S. T., & Kim, K. S. (2019) · Materials · doi:10.3390/ma12040657 · Cited by 111
Jayathilakage, R., Sanjayan, J., & Rajeev, P. (2019) · Materials and Structures · doi:10.1617/s11527-019-1322-4 · Cited by 108
Self-citationInterlayer Strength of 3D Printed Concrete
Marchment, T., Sanjayan, J., Nematollahi, B., & Xia, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00012-9 · Cited by 73
Self-citationMechanical Behavior of 3D Printed Cement Materials
Sonebi, M., Amziane, S., & Perrot, A. (2019) · Wiley eBooks · doi:10.1002/9781119610755.ch4 · Cited by 17
Nam, Y. J., Hwang, Y. K., Park, J. W., & Lim, Y. M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00004-x · Cited by 9
Cited by
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Recent advances in the concrete industry to reduce its carbon dioxide emissions
Adesina, A. (2020) · Environmental Challenges · doi:10.1016/j.envc.2020.100004 · Cited by 384
On-site autonomous construction robots: Towards unsupervised building
Melenbrink, N., Werfel, J., & Menges, A. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103312 · Cited by 350
Metadata
- Authors
- Marchment, T., & Sanjayan, J.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 109
- Pages
- 102992
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W2982239641
- Cited by
- 347
- References
- 36
- FWCI
- 18.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.