The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
On-site autonomous construction robots: Towards unsupervised building
Abstract
Abstract Real-world construction projects typically require three groups of tasks: site preparation (earthmoving, leveling), substructure (anchoring, foundations), and superstructure (load-bearing elements, facade, plumbing, wiring, etc.). Advances in construction automation have revealed a gap between industry and academic research, where industry efforts have been focused on automating conventional earthmoving equipment and embracing prefabrication in order to reduce the amount of work that needs to be done on site, while academic efforts have largely concentrated on proposals for on-site additive manufacturing or discrete assembly, which may be of limited applicability to industry. This review presents a broad range of advancements in construction automation research, and finds that achieving fully autonomous construction in unstructured environments will require considerably more development in all three groups of construction tasks, as well as a particular emphasis on coordinating myriad construction tasks between different task-specific robots. Consideration is given to both mature technologies (conventional equipment widely used in industry) and emerging technologies (novel machines designed for autonomy). Key findings from the survey suggest that achieving the goal of fully autonomous construction will require more attention to be paid to site preparation and substructure tasks, material-robot systems (co-designed robots and building materials), embedded sensing, auxiliary construction tasks, and coordinating operations between robot systems. More general lessons from the literature indicate that making incremental improvements to mature technologies may benefit the industry in the short term, but there are considerable limitations to adding autonomy to equipment designed for human operators. Instead, we perceive a demand for novel hardware to be developed for specific tasks, in each case based on fundamental principles and at the appropriate scale, as well as for an increase in interdisciplinary research. We suggest that the reported shortage of skilled labor in the industry can be met with an increased emphasis on training for leveraging advances in automation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Innovation: The Attacker's Advantage
Otto, E. R., & Foster, R. (1987) · The Academy of Management Review · doi:10.2307/258527 · Cited by 1,021
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Designing Collective Behavior in a Termite-Inspired Robot Construction Team
Werfel, J., Petersen, K., & Nagpal, R. (2014) · Science · doi:10.1126/science.1245842 · Cited by 599
Self-citationApplication of Modular Construction in High-Rise Buildings
Lawson, R. M., Ogden, R. G., & Bergin, R. (2011) · Journal of Architectural Engineering · doi:10.1061/(asce)ae.1943-5568.0000057 · Cited by 593
The Neolithic Demographic Transition and its Consequences
(2008) · Springer eBooks · doi:10.1007/978-1-4020-8539-0 · Cited by 559
Bock, T. (2015) · Automation in Construction · doi:10.1016/j.autcon.2015.07.022 · Cited by 550
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Craveiro, F., Duarte, J. P., Bartolo, H., & Bartolo, P. J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.011 · Cited by 455
Cited by
Recent advancements of robotics in construction
Xiao, B., Chen, C., & Yin, X. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104591 · Cited by 204
Additive manufacturing using mobile robots: Opportunities and challenges for building construction
Dörfler, K., Dielemans, G., Lachmayer, L., Recker, T., Raatz, A., Lowke, D., & Gerke, M. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106772 · Cited by 124
Robotics in the Construction Sector: Trends, Advances, and Challenges
Liu, Y., A.H., A., Haron, N. A., N.A., B., & Wang, H. (2024) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-024-02104-4 · Cited by 60
A Circular Built Environment in the Digital Age
(2024) · Circular Economy and Sustainability · doi:10.1007/978-3-031-39675-5 · Cited by 59
Metadata
- Authors
- Melenbrink, N., Werfel, J., & Menges, A.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 119
- Pages
- 103312
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W3038935994
- Cited by
- 350
- References
- 63
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On-site autonomous construction robots: Towards unsupervised building. https://app.cochat.ai/papers/10.1016/j.autcon.2020.103312
- The paper
- Melenbrink, N., Werfel, J., & Menges, A. (2020). On-site autonomous construction robots: Towards unsupervised building. Automation in Construction. https://doi.org/10.1016/j.autcon.2020.103312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.