The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
On-site autonomous construction robots: Towards unsupervised building
Abstract
Abstract Real-world construction projects typically require three groups of tasks: site preparation (earthmoving, leveling), substructure (anchoring, foundations), and superstructure (load-bearing elements, facade, plumbing, wiring, etc.). Advances in construction automation have revealed a gap between industry and academic research, where industry efforts have been focused on automating conventional earthmoving equipment and embracing prefabrication in order to reduce the amount of work that needs to be done on site, while academic efforts have largely concentrated on proposals for on-site additive manufacturing or discrete assembly, which may be of limited applicability to industry. This review presents a broad range of advancements in construction automation research, and finds that achieving fully autonomous construction in unstructured environments will require considerably more development in all three groups of construction tasks, as well as a particular emphasis on coordinating myriad construction tasks between different task-specific robots. Consideration is given to both mature technologies (conventional equipment widely used in industry) and emerging technologies (novel machines designed for autonomy). Key findings from the survey suggest that achieving the goal of fully autonomous construction will require more attention to be paid to site preparation and substructure tasks, material-robot systems (co-designed robots and building materials), embedded sensing, auxiliary construction tasks, and coordinating operations between robot systems. More general lessons from the literature indicate that making incremental improvements to mature technologies may benefit the industry in the short term, but there are considerable limitations to adding autonomy to equipment designed for human operators. Instead, we perceive a demand for novel hardware to be developed for specific tasks, in each case based on fundamental principles and at the appropriate scale, as well as for an increase in interdisciplinary research. We suggest that the reported shortage of skilled labor in the industry can be met with an increased emphasis on training for leveraging advances in automation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Innovation: The Attacker's Advantage
Otto, E. R., & Foster, R. (1987) · The Academy of Management Review · doi:10.2307/258527 · Cited by 1,021
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Designing Collective Behavior in a Termite-Inspired Robot Construction Team
Werfel, J., Petersen, K., & Nagpal, R. (2014) · Science · doi:10.1126/science.1245842 · Cited by 599
Self-citationApplication of Modular Construction in High-Rise Buildings
Lawson, R. M., Ogden, R. G., & Bergin, R. (2011) · Journal of Architectural Engineering · doi:10.1061/(asce)ae.1943-5568.0000057 · Cited by 593
The Neolithic Demographic Transition and its Consequences
(2008) · Springer eBooks · doi:10.1007/978-1-4020-8539-0 · Cited by 559
Bock, T. (2015) · Automation in Construction · doi:10.1016/j.autcon.2015.07.022 · Cited by 550
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Craveiro, F., Duarte, J. P., Bartolo, H., & Bartolo, P. J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.011 · Cited by 455
Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Mesh reinforcing method for 3D Concrete Printing
Marchment, T., & Sanjayan, J. (2020) · Automation in Construction · doi:10.1016/j.autcon.2019.102992 · Cited by 347
Toward site-specific and self-sufficient robotic fabrication on architectural scales
Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017) · Science Robotics · doi:10.1126/scirobotics.aam8986 · Cited by 259
Construction with quadrotor teams
Lindsey, Q., Mellinger, D., & Kumar, V. (2012) · Autonomous Robots · doi:10.1007/s10514-012-9305-0 · Cited by 239
A review of collective robotic construction
Petersen, K. H., Napp, N., Stuart-Smith, R., Rus, D., & Kovac, M. (2019) · Science Robotics · doi:10.1126/scirobotics.aau8479 · Cited by 225
Quale, J., Eckelman, M. J., Williams, K. W., Sloditskie, G., & Zimmerman, J. B. (2012) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00424.x · Cited by 220
Current Progress of 3D Concrete Printing Technologies
Nematollahi, B., Xia, M., & Sanjayan, J. (2017) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2017/0035 · Cited by 220
A survey of automation-enabled human-in-the-loop systems for infrastructure visual inspection
Agnisarman, S., Lopes, S., Chalil Madathil, K., Piratla, K., & Gramopadhye, A. (2019) · Automation in Construction · doi:10.1016/j.autcon.2018.10.019 · Cited by 205
Vähä, P., Heikkilä, T., Kilpeläinen, P., Järviluoma, M., & Gambao, E. (2013) · Automation in Construction · doi:10.1016/j.autcon.2013.08.002 · Cited by 198
Robots in the nuclear industry: a review of technologies and applications
Bogue, R. (2011) · Industrial Robot: An International Journal · doi:10.1108/01439911111106327 · Cited by 175
Buchli, J., Giftthaler, M., Kumar, N., Lussi, M., Sandy, T., Dörfler, K., & Hack, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.013 · Cited by 165
Robotic Fabrication in Architecture, Art and Design 2016
Reinhardt, D. I. E., Saunders, R., & Burry, J. (2016) · Springer eBooks · doi:10.1007/978-3-319-26378-6 · Cited by 151
3D M-Blocks: Self-reconfiguring robots capable of locomotion via pivoting in three dimensions
Romanishin, J. W., Gilpin, K. W., Claici, S., et al. (2015) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2015.7139450 · Cited by 149
Dodoo, A., Gustavsson, L., & Sathre, R. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.11.017 · Cited by 149
Construction Robots: Elementary Technologies and Single-Task Construction Robots
Bock, T. A., & Linner, T. (2016) · Cambridge University Press eBooks · doi:10.1017/cbo9781139872041 · Cited by 143
Flexible formwork technologies – a state of the art review
Hawkins, W., Herrmann, M., Ibell, T. J., Kromoser, B., Michaelski, A., Orr, J. J., Pedreschi, R., Pronk, A., Schipper, H. R., Shepherd, P., et al. (2016) · Structural Concrete · doi:10.1002/suco.201600117 · Cited by 134
Feasibility study for drone-based masonry construction of real-scale structures
Goessens, S., Mueller, C., & Latteur, P. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.06.015 · Cited by 131
Non-contact sensing based geometric quality assessment of buildings and civil structures: A review
Kim, M.-K., Wang, Q., & Li, H. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.002 · Cited by 126
Bock, T. A., & Linner, T. (2015) · Cambridge University Press eBooks · doi:10.1017/cbo9781139924146 · Cited by 124
Greenhouse Effect and Sea Level Rise; A Challenge for This Generation
Gregory, K. J., Barth, M. C., & Titus, J. G. (1988) · Geographical Journal · doi:10.2307/633502 · Cited by 123
Kontovourkis, O., & Tryfonos, G. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.103005 · Cited by 121
Goring‐Morris, A. N., & Belfer‐Cohen, A. (2008) · Springer eBooks · doi:10.1007/978-1-4020-8539-0_10 · Cited by 118
Dörfler, K., Sandy, T., Giftthaler, M., Gramazio, F., Köhler, M., & Buchli, J. (2016) · Springer eBooks · doi:10.1007/978-3-319-26378-6_15 · Cited by 116
Mobile robotic fabrication on construction sites: DimRob
Helm, V., Ercan, S., Gramazio, F., et al. (2012) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2012.6385617 · Cited by 115
Robotic autonomous systems for earthmoving in military applications
Ha, Q. P., Yen, L., & Balaguer, C. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102934 · Cited by 115
Robotics and Automation in Construction
Balaguer, C., & Abderrahim, M. (2008) · InTech eBooks · doi:10.5772/86 · Cited by 113
Trends in Robotics and Automation in Construction
Balaguer, C., & Abderrahim, M. (2008) · InTech eBooks · doi:10.5772/5865 · Cited by 95
Intelligent Autonomous Systems 13
Menegatti, E., Michael, N., Berns, K., & Yamaguchi, H. (2015) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-08338-4 · Cited by 88
Task planning strategy and path similarity analysis for an autonomous excavator
Kim, J., Lee, D., & Seo, J. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103108 · Cited by 88
Mobile robotic fabrication beyond factory conditions: case study Mesh Mould wall of the DFAB HOUSE
Dörfler, K., Hack, N., Sandy, T., et al. (2019) · Construction Robotics · doi:10.1007/s41693-019-00020-w · Cited by 81
Material–Robot System for Assembly of Discrete Cellular Structures
Jenett, B., Abdel-Rahman, A., Cheung, K., & Gershenfeld, N. (2019) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2019.2930486 · Cited by 80
Regolith Advanced Surface Systems Operations Robot (RASSOR)
Mueller, R. P., Cox, R. E., Ebert, T., Smith, J. D. H., Schuler, J. M., & Nick, A. J. (2013) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2013.6497341 · Cited by 78
Automatic Modular Assembly System and its Distributed Control
Terada, Y., & Murata, S. (2008) · The International Journal of Robotics Research · doi:10.1177/0278364907085562 · Cited by 77
Autonomous robotic stone stacking with online next best object target pose planning
Furrer, F., Wermelinger, M., Yoshida, H., Gramazio, F., Köhler, M., Siegwart, R., & Hutter, M. (2017) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2017.7989272 · Cited by 71
Technological aspects in the development of a mobile bricklaying robot
Pritschow, G., Dalacker, M., Kurz, J. H., & Gaenssle, M. (1996) · Automation in Construction · doi:10.1016/0926-5805(95)00015-1 · Cited by 69
Collective Robotic Site Preparation
Parker, C. A. C., & Zhang, H. (2006) · Adaptive Behavior · doi:10.1177/105971230601400101 · Cited by 54
Ding, R., Zhang, J., Bing Hong, X. U., et al. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.08.001 · Cited by 51
Bock, T.-A. (1988) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc1988/0019 · Cited by 50
Trade Study of Excavation Tools and Equipment for Lunar Outpost Development and ISRU
Mueller, R. P., King, R. H., & El‐Genk, M. S. (2008) · AIP conference proceedings · doi:10.1063/1.2844973 · Cited by 49
Structure-Reconfiguring Robots: Autonomous Truss Reconfiguration and Manipulation
Nigl, F., Li, S., Blum, J. E., & Lipson, H. (2013) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2012.2201579 · Cited by 45
Advantages of continuous excavation in lightweight planetary robotic operations
Skonieczny, K., Wettergreen, D. S., & Whittaker, W. (2016) · The International Journal of Robotics Research · doi:10.1177/0278364915615689 · Cited by 45
(2009) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2009 · Cited by 44
Flippy: A soft, autonomous climber with simple sensing and control
Malley, M. J. D., Rubenstein, M., & Nagpal, R. (2017) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2017.8206563 · Cited by 40
A Review of Lunar Regolith Excavation Robotic Device Prototypes
Mueller, R. P., & van Susante, P. (2011) · AIAA SPACE Conference & Exposition · doi:10.2514/6.2011-7234 · Cited by 35
Cyber Physical Macro Material as a UAV [re]Configurable Architectural System
Wood, D. M., Yablonina, M., Aflalo, M., et al. (2018) · Springer eBooks · doi:10.1007/978-3-319-92294-2_25 · Cited by 29
Niskanen, I., Immonen, M., Makkonen, T., Keränen, P., Tyni, P., Hallman, L. W., Hiltunen, M., Kolli, T., Louhisalmi, Y., Kostamovaara, J., et al. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103112 · Cited by 27
Autonomous Adaptive Modification of Unstructured Environments
da Silva, M. S., Thangavelu, V., Gosrich, W., & Napp, N. (2018) · Robotics: Science and Systems · doi:10.15607/rss.2018.xiv.070 · Cited by 26
Lightweight Bulldozer Attachment for Construction and Excavation on the Lunar Surface
Mueller, R. P., Schuler, J. M., Nick, A. J., Wilkinson, A., Gallo, C. A., & King, R. H. (2009) · AIAA SPACE Conference & Exposition · doi:10.2514/6.2009-6466 · Cited by 25
In-Situ Robotic Fabrication: Advanced Digital Manufacturing Beyond the Laboratory
Helm, V., Willmann, J. S., Gramazio, F., et al. (2013) · Springer tracts in advanced robotics · doi:10.1007/978-3-319-03838-4_4 · Cited by 23
Felbrich, B., Früh, N., Prado, M., Saffarian, S., Solly, J., Vasey, L., Knippers, J., & Menges, A. (2017) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.2667781 · Cited by 21
Self-citationConstruction site navigation for the autonomous excavator Thor
Schmidt, D., & Berns, K. (2015) · International Conference on Automation, Robotics and Applications · doi:10.1109/icara.2015.7081130 · Cited by 20
Ahead of Their Time: The Sears Catalogue Prefabricated Houses
Cooke, A., & Friedman, A. (2001) · Journal of Design History · doi:10.1093/jdh/14.1.53 · Cited by 13
Cited by
Recent advancements of robotics in construction
Xiao, B., Chen, C., & Yin, X. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104591 · Cited by 204
Additive manufacturing using mobile robots: Opportunities and challenges for building construction
Dörfler, K., Dielemans, G., Lachmayer, L., Recker, T., Raatz, A., Lowke, D., & Gerke, M. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106772 · Cited by 124
Robotics in the Construction Sector: Trends, Advances, and Challenges
Liu, Y., A.H., A., Haron, N. A., N.A., B., & Wang, H. (2024) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-024-02104-4 · Cited by 60
“The widespread adoption of autonomous robots is set to catalyze a paradigm shift in construction project planning and execution [37].”
A Circular Built Environment in the Digital Age
(2024) · Circular Economy and Sustainability · doi:10.1007/978-3-031-39675-5 · Cited by 59
Metadata
- Authors
- Melenbrink, N., Werfel, J., & Menges, A.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 119
- Pages
- 103312
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W3038935994
- Cited by
- 350
- References
- 63
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.