The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Continuous nonsingular terminal sliding mode control based on adaptive sliding mode disturbance observer for uncertain nonlinear systems
Abstract
Abstract In this paper, a finite time control method for an uncertain nonlinear system is proposed. An adaptive sliding mode disturbance observer is designed to estimate the disturbance in finite time. The assumptions on the disturbance are relaxed in the sense that, its first derivative upper bound is considered to be unknown and only the order of its second derivative upper bound is known. Based on the output of proposed disturbance observer, a terminal sliding mode control scheme for the uncertain nonlinear system is presented. The designed control law is continuous and nonsingular. Furthermore, compared with some existing sliding mode controllers, the conditions on the controller parameters bounds are relaxed. It is proved that the disturbance observer error as well as the system states converges to the origin in finite time. Finally, the effectiveness of the proposed method is shown by numerical simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Disturbance-Observer-Based Control and Related Methods—An Overview
Chen, W.-H., Yang, J., Guo, L., & Li, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2478397 · Cited by 2,985
Continuous finite-time control for robotic manipulators with terminal sliding mode
Yu, S., Yu, X., Shirinzadeh, B., & Man, Z. (2005) · Automatica · doi:10.1016/j.automatica.2005.07.001 · Cited by 2,647
Non-singular terminal sliding mode control of rigid manipulators
Feng, Y., Yu, X., & Man, Z. (2002) · Automatica · doi:10.1016/s0005-1098(02)00147-4 · Cited by 2,322
Geometric homogeneity with applications to finite-time stability
Bhat, S. P., & Bernstein, D. S. (2005) · Mathematics of Control Signals and Systems · doi:10.1007/s00498-005-0151-x · Cited by 1,669
Sliding-Mode Control for Systems With Mismatched Uncertainties via a Disturbance Observer
Yang, J., Li, S., & Yu, X. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2183841 · Cited by 1,332
A robust MIMO terminal sliding mode control scheme for rigid robotic manipulators
Zhihong, M., Paplinski, A. P., & Wu, H. R. (1994) · IEEE Transactions on Automatic Control · doi:10.1109/9.362847 · Cited by 978
Disturbance Observer-Based Control: Methods and Applications
Li, S., Yang, J. T., Chen, W., & Chen, X. (2014) · Cited by 840
Distributed robust finite-time nonlinear consensus protocols for multi-agent systems
Zuo, Z., & Tie, L. (2016) · International Journal of Systems Science · doi:10.1080/00207721.2014.925608 · Cited by 797
Chattering free full-order sliding-mode control
Feng, Y., Han, F., & Yu, X. (2014) · Automatica · doi:10.1016/j.automatica.2014.01.004 · Cited by 646
Sliding Mode Control for Mismatched Uncertain Systems Using an Extended Disturbance Observer
Ginoya, D., Shendge, P. D., & Phadke, S. B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2271597 · Cited by 611
Continuous nonsingular terminal sliding mode control for systems with mismatched disturbances
Yang, J., Li, S., Su, J., & Yu, X. (2013) · Automatica · doi:10.1016/j.automatica.2013.03.026 · Cited by 587
Terminal sliding mode control of MIMO linear systems
Zhihong, M., & Yu, X. H. (1997) · IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications · doi:10.1109/81.641769 · Cited by 550
Terminal sliding mode control of MIMO linear systems
Zhihong, M., & Yu, X. H. (2002) · Proceedings of 35th IEEE Conference on Decision and Control · doi:10.1109/cdc.1996.577601 · Cited by 440
Terminal sliding mode tracking control for a class of SISO uncertain nonlinear systems
Chen, M., Wu, Q.-X., & Cui, R.-X. (2013) · ISA Transactions · doi:10.1016/j.isatra.2012.09.009 · Cited by 291
Yang, J., Su, J., Li, S., & Yu, X. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2279232 · Cited by 285
Cited by
Nguyen, M. H., Dao, H. V., & Ahn, K. K. (2023) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.6421 · Cited by 48
Gao, Y.-C., Shen, G., Li, X., Zhu, Z.-C., & Wang, Q.-G. (2025) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2024.3435746 · Cited by 25
Metadata
- Authors
- Rabiee, H., Ataei, M., & Ekramian, M.
- Venue
- Automatica
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 109
- Pages
- 108515
- ISSN
- 0005-1098 (ISSN-L)
- OpenAlex
- W2964728651
- Cited by
- 261
- References
- 15
- FWCI
- 14.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.