Hierarchical macro-microporous WPU-ECM scaffolds combined with Microfracture Promote in Situ Articular Cartilage Regeneration in Rabbits
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Tissue engineering provides a promising avenue for treating cartilage defects. However, great challenges remain in the development of structurally and functionally optimized scaffolds for cartilage repair and regeneration. In this study, decellularized cartilage extracellular matrix (ECM) and waterborne polyurethane (WPU) were employed to construct WPU and WPU-ECM scaffolds by water-based 3D printing using low-temperature deposition manufacturing (LDM) system, which combines rapid deposition manufacturing with phase separation techniques. The scaffolds successfully achieved hierarchical macro‐microporous structures. After adding ECM, WPU scaffolds were markedly optimized in terms of porosity, hydrophilia and bioactive components. Moreover, the optimized WPU-ECM scaffolds were found to be more suitable for cell distribution, adhesion, and proliferation than the WPU scaffolds. Most importantly, the WPU-ECM scaffold could facilitate the production of glycosaminoglycan (GAG) and collagen and the upregulation of cartilage-specific genes. These results indicated that the WPU-ECM scaffold with hierarchical macro‐microporous structures could recreate a favorable microenvironment for cell adhesion, proliferation, differentiation, and ECM production. In vivo studies further revealed that the hierarchical macro‐microporous WPU-ECM scaffold combined with the microfracture procedure successfully regenerated hyaline cartilage in a rabbit model. Six months after implantation, the repaired cartilage showed a similar histological structure and mechanical performance to that of normal cartilage. In conclusion, the hierarchical macro‐microporous WPU-ECM scaffold may be a promising candidate for cartilage tissue engineering applications in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782 · cited 1×
“Regarding clinical applications, although cell-based tissue-engineered strategies have been shown to be effective in repairing cartilage defects [35,36] and great progress has been made in cell-loaded 3D printing [37,38], cell-free scaffolds have attracted more attention for translation, and the acellular concept has…”
BackgroundExtracellular matrix-based materials for regenerative medicine
Hussey, G. S., Dziki, J. L., & Badylak, S. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0023-x · Cited by 844
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Extracellular matrix-derived biomaterials in engineering cell function
Xing, H., Lee, H., Luo, L., & Kyriakides, T. R. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.107421 · Cited by 302 · cited 2×
“tions that modulate cell behavior [15].”
BackgroundWen, Y.-T., Dai, N.-T., & Hsu, S.-H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.044 · Cited by 91 · cited 1×
“Although there have been some successful reports on WPU in regenerative medicine [13,14], it should be pointed out that WPU scaffolds still inadequately recreate an instructive microenvironment for cell growth and tissue development, owing to minimal cell recognition sites and”
Background
Cited by
Articular cartilage repair biomaterials: strategies and applications
Wang, M., Wu, Y., Li, G., Lin, Q., Zhang, W., Liu, H., & Su, J. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.100948 · Cited by 145
Xu, P., Kankala, R. K., Wang, S., & Chen, A. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbad107 · Cited by 129
Zhou, J., Li, Q., Tian, Z., Yao, Q., & Zhang, M. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100870 · Cited by 53
“Chen and colleagues [154] utilized a comparable method, employing a low-temperature deposition technique to print ECM and water-based polyurethane (WPU), which were subsequently lyophilized to create macroporous scaffolds.”
Method
Metadata
- Authors
- Chen, M., Li, Y., Liu, S., Feng, Z., Wang, H., Yang, D., Guo, W., Yuan, Z., Gao, S., Zhang, Y., Zha, K., Huang, B., Wei, F., Sang, X., Tian, Q., Yang, X., sui, X., Zhou, Y., Zheng, Y., & Guo, Q.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 6
- Issue
- 7
- Pages
- 1932-1944
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W3114552093
- Cited by
- 62
- References
- 7
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hierarchical macro-microporous WPU-ECM scaffolds combined with Microfracture Promote in Situ Articular Cartilage Regeneration in Rabbits. https://app.cochat.ai/papers/10.1016/j.bioactmat.2020.12.009
- The paper
- Chen, M., Li, Y., Liu, S., Feng, Z., Wang, H., Yang, D., Guo, W., Yuan, Z., Gao, S., Zhang, Y., Zha, K., Huang, B., Wei, F., Sang, X., Tian, Q., Yang, X., sui, X., Zhou, Y., Zheng, Y., & Guo, Q. (2021). Hierarchical macro-microporous WPU-ECM scaffolds combined with Microfracture Promote in Situ Articular Cartilage Regeneration in Rabbits. Bioactive Materials. https://doi.org/10.1016/j.bioactmat.2020.12.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.