Additively manufactured metallic biomaterials
Open accessThe DOI matches its Crossref record; 243 of the 243 references it cites were found in a registry or an index.
Abstract
Metal additive manufacturing (AM) has led to an evolution in the design and fabrication of hard tissue substitutes, enabling personalized implants to address each patient's specific needs. In addition, internal pore architectures integrated within additively manufactured scaffolds, have provided an opportunity to further develop and engineer functional implants for better tissue integration, and long-term durability. In this review, the latest advances in different aspects of the design and manufacturing of additively manufactured metallic biomaterials are highlighted. After introducing metal AM processes, biocompatible metals adapted for integration with AM machines are presented. Then, we elaborate on the tools and approaches undertaken for the design of porous scaffold with engineered internal architecture including, topology optimization techniques, as well as unit cell patterns based on lattice networks, and triply periodic minimal surface. Here, the new possibilities brought by the functionally gradient porous structures to meet the conflicting scaffold design requirements are thoroughly discussed. Subsequently, the design constraints and physical characteristics of the additively manufactured constructs are reviewed in terms of input parameters such as design features and AM processing parameters. We assess the proposed applications of additively manufactured implants for regeneration of different tissue types and the efforts made towards their clinical translation. Finally, we conclude the review with the emerging directions and perspectives for further development of AM in the medical industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–243 of 243
Hamid, Q., Snyder, J., Wang, C., Timmer, M., Hammer, J., Guceri, S., & Sun, W. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034109 · Cited by 72 · cited 1×
“deposition modeling (FDM) wherein thermoplastic polymers are meltextruded to build layers [69,70].”
BackgroundCutolo, A., Neirinck, B., Lietaert, K., de Formanoir, C., & Hooreweder, B. V. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.008 · Cited by 72
Oral manifestations of Ehlers-Danlos syndrome.
Létourneau, Y., Pérusse, R., & Buithieu, H. (2001) · PubMed · Cited by 71
Additively Manufactured Tantalum Implants for Repairing Bone Defects: A Systematic Review
Hu, Q., Lei, T., Lei, P., & Hu, Y. (2020) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2020.0134 · Cited by 70 · cited 1×
“Most metallic implants such as Ti alloys are bioinert and lack sufficient osseointegration, which postpones integration with host tissue and implant fixation [87].”
BackgroundDesign of complex bone internal structure using topology optimization with perimeter control
Park, J., Sutradhar, A., Shah, J. J., & Paulino, G. H. (2018) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2018.01.001 · Cited by 70 · cited 2×
“[137] introduced a ‘perimeter control’ constraint such that a lower bound is placed on the perimeter of every feature.”
BackgroundAsensio, G., Vázquez‐Lasa, B., & Rojo, L. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8111982 · Cited by 69 · cited 1×
“17C illustrates the most common techniques used in dental implant production to develop bioactive surfaces while combining antimicrobial activity to maximize healing and antibacterial capacities and consequently improve osseointegration [337].”
BackgroundJabari, E., Liravi, F., Davoodi, E., Lin, L., & Toyserkani, E. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101330 · Cited by 69
Self-citationDevelopments on Electron Beam Melting (EBM) of Ti–6Al–4V: A Review
Kolamroudi, M. K., Asmael, M., İlkan, M., & Kordani, N. (2021) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-021-02230-9 · Cited by 69 · cited 2×
“As opposed to LPBF where the 3D printing is performed under inert gas, EPBF requires a high vacuum to prevent the smoking phenomenon, contamination, and powder oxidation [28].”
BackgroundBarak, M. M., & Black, M. A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.12.010 · Cited by 67
Shuai, C., He, C., Qian, G., Min, A., Deng, Y., Yang, W., & Zang, X. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108564 · Cited by 66
Piezoresistive sensing in chopped carbon fiber embedded PDMS yarns
Montazerian, H., Dalili, A., Milani, A. S., & Hoorfar, M. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.090 · Cited by 65
Self-citationIntegrated Sensors in Advanced Composites: A Critical Review
Montazerian, H., Rashidi, A., Milani, A. S., & Hoorfar, M. (2019) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408436.2019.1588705 · Cited by 65
Self-citationNano-porous anodic alumina: fundamentals and applications in tissue engineering
Davoodi, E., Zhianmanesh, M., Montazerian, H., Milani, A. S., & Hoorfar, M. (2020) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-020-06398-2 · Cited by 65
Self-citationWu, L., Shrestha, P., Iapichino, M., Cai, Y., Kim, B., & Stoeber, B. (2020) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2020.102192 · Cited by 64 · cited 1×
“Based on Fick’s first law, the diffusivity also relates diffusion flux to the concentration gradient according to Equation (21) [288].”
BackgroundSelf-expanding stents based on shape memory alloys and shape memory polymers
Omid, S. O., Goudarzi, Z., Kangarshahi, L. M., Mokhtarzade, A., & Bahrami, F. (2020) · Journal of Composites and Compounds · doi:10.29252/jcc.2.2.5 · Cited by 64
Alireza Rahbari, B., Montazerian, H., Davoodi, E., & Homayoonfar, S. (2016) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2016.1215436 · Cited by 62
Self-citationTopological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction
Cheng, K.-J., Liu, Y.-F., Wang, R., Zhang, J.-X., Jiang, X.-F., Dong, X.-T., & Xu, X. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103758 · Cited by 60
Dallago, M., Zanini, F., Carmignato, S., Pasini, D., & Benedetti, M. (2018) · Procedia Structural Integrity · doi:10.1016/j.prostr.2018.12.027 · Cited by 59
Temperature effects on the lattice constants and crystal structure of a Co-27Cr-5Mo low-carbon alloy
Saldívar‐García, A. J., & López, H. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0232-6 · Cited by 59 · cited 1×
“the Co–Cr–Mo alloys, the Cr element protects the implant from the corrosive environment by forming a thin continuous oxide layer on the surface and Mo improves the bulk strength and corrosion resistance [101].”
BackgroundDavoodi, E., Montazerian, H., Khademhosseini, A., & Toyserkani, E. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.10.001 · Cited by 58 · cited 1×
“One major limitation in solid network TPMS structures involves the lack of interconnectivity at the extreme design relative densities as the TPMS structures lose their continuousness at those ranges of offset values (C) [192,193].”
BackgroundSelf-citationQuality of extensive fixed prosthodontics after five years
Glantz, P.-O. J., Ryge, G., Jendresen, M. D., & Nilner, K. (1984) · Journal of Prosthetic Dentistry · doi:10.1016/0022-3913(84)90327-5 · Cited by 57 · cited 1×
“enormous success in advancing customized medicine and personalized prostheses [293] as well as quick operation planning of surgical guides [294] by integrating different bioactive materials as discussed in section 3.”
BackgroundKim, E.-C., Kim, M., Leesungbok, R., Lee, S. W., & Ahn, S. (2016) · Dental Materials · doi:10.1016/j.dental.2016.09.017 · Cited by 50
Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures
Vrána, R., Koutný, D., Paloušek, D., Pantělejev, L., Jaroš, J., Zikmund, T., & Kaiser, J. (2018) · Materials · doi:10.3390/ma11091763 · Cited by 50
López, A. C., Peláez, A., Restoy-Lozano, A., Jacquott, I., & Perera, R. (2021) · Scientific Reports · doi:10.1038/s41598-021-94980-1 · Cited by 49
Ambu, R., & Morabito, A. E. (2018) · Symmetry · doi:10.3390/sym10090361 · Cited by 46 · cited 1×
“Besides, cubical strut-based lattices with sharp corners show higher stress concentration compared to TPMS scaffolds with smooth curvy surfaces [200,201].”
BackgroundBaiguera, S., Gaudio, C. D., Nardo, P. D., Manzari, V., Carotenuto, F., & Teodori, L. (2020) · BioMed Research International · doi:10.1155/2020/2689701 · Cited by 45
Extrusion-based 3D printed magnesium scaffolds with multifunctional MgF 2 and MgF 2 –CaP coatings
Dong, J., Tümer, N., Putra, N. E., Zhu, J., Li, Y., Leeflang, M. A., Taheri, P., Fratila-Apachitei, L. E., Mol, J. M. C., ZADPOOR, A. A., et al. (2021) · Biomaterials Science · doi:10.1039/d1bm01238j · Cited by 45
MacBarb, R. F., Lindsey, D. P., Woods, S. A., Lalor, P., Gundanna, M. I., & Yerby, S. A. (2017) · The International Journal of Spine Surgery · doi:10.14444/4016 · Cited by 39 · cited 1×
“strated better bone fixation at the clinical trials [347].”
BackgroundElmi, A. E., Melancon, D., Asgari, M., Liu, L., & Pasini, D. (2020) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2020.75 · Cited by 39 · cited 3×
“In a recent study on LPBF processed lattice structures [243], surface defects such as powder particles bounded to the surface due to the unstable melt pool, spherical surface pores with an average diameter of 80 μm, and stair-stepping effect around the fabricated lattice’s nodes were reported (Fig.”
BackgroundAl-Tamimi, A. A., Huang, B., Vyas, C., Hernández, M. A., Peach, C. A., & Bártolo, P. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03866-0 · Cited by 37
Cheng, K., Liu, Y., Yao, C., Zhao, W., & Xu, X. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2017-0231 · Cited by 35
Designing Cellular Structures for Additive Manufacturing Using Voronoi–Monte Carlo Approach
Liu, T., Guessasma, S., Zhu, J., & Zhang, W. (2019) · Polymers · doi:10.3390/polym11071158 · Cited by 33
Deng, X., Wang, Y., Yan, J., Liu, T., & Wang, S. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031803 · Cited by 32 · cited 1×
“In many efforts, the use of the conventional topology optimization approaches either by the SIMP method [142,154–156] or other methods [133,157] have been demonstrated.”
MethodImage-Based Geometrical Characterization of Nodes in Additively Manufactured Lattice Structures
Lozanovski, B., Downing, D., Tino, R., Tran, P., Shidid, D., Emmelmann, C., Qian, M., Choong, P., Brandt, M., & Leary, M. (2021) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2020.0091 · Cited by 32
3D printing with particles as feedstock materials
Zhang, J., Amini, N., Morton, D. A. V., & Hapgood, K. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.07.022 · Cited by 28 · cited 1×
“The metal sheets are commonly glued together; however, other techniques such as hot pressing, clamping, and ultrasound irradiation can also be used [66].”
BackgroundLang, J. J., Bastian, M., Foehr, P., Seebach, M., Weitz, J., von Deimling, C., Schwaiger, B. J., Micheler, C. M., Wilhelm, N., Große, C. U., et al. (2021) · PLoS ONE · doi:10.1371/journal.pone.0253002 · Cited by 27
Metallic additive manufacturing for bone-interfacing implants
Sarker, A., Leary, M., & Fox, K. E. (2020) · Biointerphases · doi:10.1116/6.0000414 · Cited by 25 · cited 11×
“Li et al. [304] proposed Ti–Nb–Ta–Zr compounds with stiffness of about 48–55 GPa (almost half of Ti–6Al–4V) for the fabrication of metal implants.”
BackgroundInfluentialMagnesium-based Biodegradable Materials for Biomedical Applications
Zhang, C., Lin, J., & Liu, H. H. (2018) · MRS Advances · doi:10.1557/adv.2018.488 · Cited by 23 · cited 2×
“The Mg2+ can act as a compelling catalyst to activate more than 300 required enzymes in the human body [108].”
BackgroundMiljanovic, D., Seyedmahmoudian, M., Stojcevski, A., & Horan, B. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-020-02567-0 · Cited by 23 · cited 2×
“Mating those imaging technologies and CAD with the advanced metal AM techniques has motivated a surge of interest towards clinical translation of personalized medicine approaches for tissue regenerative applications [341].”
BackgroundXia, Y., Feng, Z. C., Li, C., Wu, H., Tang, C., Wang, L., & Li, H. (2020) · Oncology Letters · doi:10.3892/ol.2020.11912 · Cited by 21 · cited 2×
“[342] conducted a case study where additively manufactured metal prostheses in mandible surgery were evaluated and compared to that of conventional methods.”
BackgroundResultGrecchi, F., Zecca, P. A., Macchi, A., Mangano, A., Riva, F., Grecchi, E., & Mangano, C. (2020) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph17082693 · Cited by 19 · cited 1×
“[343] additively manufactured a full mandibular customed prosthesis and implanted it in a 67-year-old patient.”
BackgroundLi, J., Chen, D., & Fan, Y. (2019) · BioMed Research International · doi:10.1155/2019/3610785 · Cited by 17 · cited 3×
“Computational fluid dynamics (CFD) is a popular design tool for predicting the microscale flows and analysis of permeability [282].”
BackgroundMethodA Novel Digital Design Approach for Metal Additive Manufacturing to Address Local Thermal Effects
Perumal, V. I., Najafi, A. R., & Kontsos, A. (2020) · Designs · doi:10.3390/designs4040041 · Cited by 10 · cited 1×
“This also leads to residual stresses that cause part distortions and failure sites at the structural scale [251].”
Background
Cited by
Ahmed, G. H. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105863 · Cited by 224
Metadata
- Authors
- Davoodi, E., Montazerian, H., Mirhakimi, A. S., Zhianmanesh, M., Ibhadode, O., Shahabad, S. I., Esmaeilizadeh, R., Sarikhani, E., Toorandaz, S., Sarabi, S. A., Nasiri, R., Zhu, Y., Kadkhodapour, J., Li, B., Khademhosseini, A., & Toyserkani, E.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2022-09
- Volume
- 15
- Pages
- 214-249
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W4200078716
- Cited by
- 224
- References
- 243
- FWCI
- 14.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.