Additively manufactured metallic biomaterials
Open accessThe DOI matches its Crossref record; 243 of the 243 references it cites were found in a registry or an index.
Abstract
Metal additive manufacturing (AM) has led to an evolution in the design and fabrication of hard tissue substitutes, enabling personalized implants to address each patient's specific needs. In addition, internal pore architectures integrated within additively manufactured scaffolds, have provided an opportunity to further develop and engineer functional implants for better tissue integration, and long-term durability. In this review, the latest advances in different aspects of the design and manufacturing of additively manufactured metallic biomaterials are highlighted. After introducing metal AM processes, biocompatible metals adapted for integration with AM machines are presented. Then, we elaborate on the tools and approaches undertaken for the design of porous scaffold with engineered internal architecture including, topology optimization techniques, as well as unit cell patterns based on lattice networks, and triply periodic minimal surface. Here, the new possibilities brought by the functionally gradient porous structures to meet the conflicting scaffold design requirements are thoroughly discussed. Subsequently, the design constraints and physical characteristics of the additively manufactured constructs are reviewed in terms of input parameters such as design features and AM processing parameters. We assess the proposed applications of additively manufactured implants for regeneration of different tissue types and the efforts made towards their clinical translation. Finally, we conclude the review with the emerging directions and perspectives for further development of AM in the medical industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759 · cited 3×
“217 compared to LPBF is the high build rate and volumes [32].”
BackgroundInfluentialGibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929 · cited 1×
“From a metallurgical standpoint, the microstructure of the as-built LPBF processed Ti–6Al–4V alloys is acicular martensitic or α′ phase structure with high dislocation density because of the high cooling rates [76].”
BackgroundTopology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890 · cited 1×
“Topology optimization aims at obtaining the optimal structural layout of a design for a set of objectives under certain constraints [132].”
BackgroundMaterials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
The COC algorithm, Part II: Topological, geometrical and generalized shape optimization
Zhou, M., & Rozvany, G. I. N. (1991) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(91)90046-9 · Cited by 1,827
The stiffness of living tissues and its implications for tissue engineering
Guimarães, C. F., Gasperini, L., Marques, A. P., & Reis, R. L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0169-1 · Cited by 1,515
Recent metallic materials for biomedical applications
Niinomi, M. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0109-2 · Cited by 1,508 · cited 2×
“This problem is addressed by introducing an ASTM F799 alloy that is a Ni-free Co–28Cr–6Mo wrought alloy [85].”
BackgroundMethodCarroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507 · cited 2×
“The layer thickness is normally in the range of 40 μm to 1 mm [35,36].”
BackgroundSLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Biomedical coatings on magnesium alloys – A review
Hornberger, H., Virtanen, S., & Boccaccini, A. R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.012 · Cited by 1,273
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048 · cited 1×
“[304] proposed Ti–Nb–Ta–Zr compounds with stiffness of about 48–55 GPa (almost half of Ti–6Al–4V) for the fabrication of metal implants.”
BackgroundSintering: Densification, Grain Growth and Microstructure
Kang, S. L. (2005) · Cited by 1,006
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960 · cited 1×
“Recent advances have resulted in topology optimization procedures for AM to address multiple physical and biological design criteria for successful bone regeneration and tissue integration within porous implants [6,7].”
BackgroundBobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
A review of mechanical properties of additively manufactured Inconel 718
Hosseini, E., & Popovich, V. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100877 · Cited by 856
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803 · cited 1×
“This method is also known as laser metal deposition (LMD), or laser energy net shaping (LENS), or laser cladding (LC), and is classified as one of the laser-based AM processes [33].”
MethodBuser, D., Sennerby, L., & De Bruyn, H. (2017) · Periodontology 2000 · doi:10.1111/prd.12185 · Cited by 792
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786 · cited 1×
“Lattice networks Lattice structures are defined as complex architectures containing an array of interconnected struts or plates that are repeatedly aligned in the 3D space [177,178].”
BackgroundWeller, C., Kleer, R., & Piller, F. T. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.02.020 · Cited by 783 · cited 1×
“241 Nevertheless, the AM implants have not achieved full approval for clinical implantation in many countries [330,339].”
BackgroundAdditive manufacturing: A framework for implementation
Mellor, S., Hao, L., & Zhang, D. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.07.008 · Cited by 777 · cited 1×
“The PBF processes can produce excellent dimensional accuracy at high relative densities [16,17] often”
BackgroundTan, K., Pjetursson, B. E., Lang, N. P., & Chan, E. S. Y. (2004) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2004.01119.x · Cited by 769 · cited 1×
“enormous success in advancing customized medicine and personalized prostheses [293] as well as quick operation planning of surgical guides [294] by integrating different bioactive materials as discussed in section 3.”
BackgroundVan Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766 · cited 2×
“Accordingly, cell nutrition, cell oxygenation, and eventually, cell proliferation and differentiation are strongly interrelated with the analysis of fluid-solid interactions in scaffold structures [283,289].”
BackgroundEvaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730 · cited 1×
“[250] showed that, at a constant design relative density, by increasing the unit cell size from 2 mm to 8 mm, the relative density of”
BackgroundYan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717 · cited 1×
“During the post-processing step, the bonded metal powders are eliminated, and the surface quality excels the original surfaces [255].”
Backgrounddu Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Laminated three-dimensional biodegradable foams for use in tissue engineering
Mikos, A. G., Sarakinos, G., Leite, S. M., Vacant, J. P., & Langer, R. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90049-8 · Cited by 666
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Self-citationMetallic Biomaterials: Current Challenges and Opportunities
Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., Cao, A., et al. (2017) · Materials · doi:10.3390/ma10080884 · Cited by 662 · cited 1×
“Long-term degradation of implants in the physiological environment and release of alloying elements such as Ni in stainless steel causes inflammatory responses, allergies, and consequently failure of the implant [95].”
BackgroundDesign and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640 · cited 2×
“Whereas, using metal AM techniques, one can fabricate thin struts and lattice geometries in high resolutions and complex shapes with a lower cost and time [158].”
BackgroundMethodManufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597 · cited 1×
“[86] additively manufactured near full density (>99%) Ti–24Nb–4Zr–8Nb (Ti2448)”
BackgroundArabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573 · cited 2×
“This technology was first developed in 1993 at the Massachusetts Institute of Technology [47] and ExOne, ZCorp, and Xoxeljet have led to the manufacturing of this technology [48].”
BackgroundInfill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572 · cited 1×
“[143] introduced a per-voxel local volume constraint (infill constraint) given in Equations (14) and (15):”
BackgroundBioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549 · cited 1×
“Simultaneous printing of biological components in composites with biopolymers (such as hydrogels) [360,361] along with metals has not been touched in the literature due to the harsh and incompatible”
BackgroundSelf-citationArabnejad, S., Johnston, B., Tänzer, M., & Pasini, D. (2016) · Journal of Orthopaedic Research® · doi:10.1002/jor.23445 · Cited by 546 · cited 11×
“In this process, bone continuously resorbs and loses mass, which causes implant loosening [261].”
BackgroundInfluentialApplication of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537 · cited 1×
“employed for surface repairing and modification [40].”
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101619 · Cited by 528
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527 · cited 2×
“[213] illustrated that the relative plateau strength in graded aluminum-based lattice structures is ~two times larger than that of uniform-based structures.”
BackgroundMurr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526 · cited 1×
“The metal powders are delivered through a hopper and then spread by a powder layering system over the build plate [31].”
BackgroundPrintability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523 · cited 1×
“It should be noted that additively manufactured Ti–6Al–4V parts are more susceptible to thermal distortion and composition changes compared to stainless steel 316 [84].”
BackgroundBone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518 · cited 1×
“Accordingly, cell nutrition, cell oxygenation, and eventually, cell proliferation and differentiation are strongly interrelated with the analysis of fluid-solid interactions in scaffold structures [283,289].”
BackgroundLiu, L., Kamm, P., García-Moreno, F., Banhart, J., & Pasini, D. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.07.003 · Cited by 513 · cited 4×
“The geometrical deviation of struts because of parasitic mass can cause localized stress concentration [234].”
BackgroundInfluentialBalla, V. K., Bodhak, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.046 · Cited by 504
Additive Manufacturing Processes in Medical Applications
Salmi, M. (2021) · Materials · doi:10.3390/ma14010191 · Cited by 500 · cited 1×
“Moreover, LOM can be easily used for 3D printing of multi-metal parts by simply alternating the sheets in each layer [67].”
BackgroundAbueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107597 · Cited by 491
Pjetursson, B. E., Tan, K., Lang, N. P., Brägger, U., Egger, M., & Zwahlen, M. (2004) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2004.01117.x · Cited by 486
Biamino, S., Penna, A., Ackelid, U., Sabbadini, S., Tassa, O., Fino, P., Pavese, M., Gennaro, P., & Badini, C. (2011) · Intermetallics · doi:10.1016/j.intermet.2010.11.017 · Cited by 486 · cited 1×
“Various types of metallic biomaterials can be additively manufactured using the EPBF process such as 316L stainless steel, cobalt-based superalloys, nickel-based superalloys, and Ti-based alloys [29].”
BackgroundCalignano, F. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.07.043 · Cited by 486 · cited 1×
“[256] illustrated that to minimize the stair-stepping effect, the minimum overhang angle (relative to the bed) in strut-based lattices should be ~30 for LPBF processed Al–S–10Mg and Ti–6Al–4V samples.”
BackgroundAdditive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481 · cited 1×
“Besides, the graded lattice structures showed a lower relative Young’s modulus that mimics better with the native bone tissue [213,214].”
BackgroundAbueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 455
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414 · cited 1×
“[92] manufactured Ti–50Ta structures with a high yield strength (882.”
BackgroundInvestigation of functionally graded TPMS structures fabricated by additive manufacturing
Yu, S., Sun, J., & Bai, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108021 · Cited by 414 · cited 1×
“improved cell ingrowth compared to the scaffolds fabricated by traditional salt leaching (stochastic design) [196,207].”
BackgroundMicrostructural evolution of a Ti–6Al–4V alloy during thermomechanical processing
Ding, R., Guo, Z. X., & Wilson, A. (2002) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(01)01531-3 · Cited by 413 · cited 1×
“Replicating such delicate features requires advanced AM techniques [296,297].”
MethodKadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 413 · cited 1×
“using finite element simulations on Ti-based scaffolds [186].”
MethodSelf-citationYang, L., Yan, C., Han, C., Chen, P., Yang, S., & Shi, Y. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.08.039 · Cited by 412
Scaffold Design and Manufacturing: From Concept to Clinic
Hollister, S. J. (2009) · Advanced Materials · doi:10.1002/adma.200802977 · Cited by 408 · cited 1×
“Permeability and diffusivity are important design criteria, by which the pore characteristics (such as pore shape, porosity, and pore size [284]) are evaluated in terms of their potential for conducting internal fluid flow to quantify the tissue ingrowth capability of the scaffold [285,286].”
BackgroundMechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404 · cited 2×
“For instance, using several beam elements to capture thickness variation defects in struts is one of the potential approaches [258].”
BackgroundMethodSelective Laser Melting: A manufacturing technology for the future?
Bremen, S., Meiners, W., & Diatlov, A. (2012) · Laser Technik Journal · doi:10.1002/latj.201290018 · Cited by 402
Kabir, H., Munir, K., Wen, C., & Li, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.013 · Cited by 397
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396 · cited 1×
“[109] added rare earth elements to Mg to fabricate LPBF processed biodegradable scaffolds with lower degradation rates.”
BackgroundLiu, F., Mao, Z., Zhang, P., Zhang, D. Z., Jiang, J., & Ma, Z. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.053 · Cited by 395
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383 · cited 1×
“With the aid of AM techniques, ordered porous Ti implants aim to lower stiffness closer to that of natural bone [75].”
BackgroundA review of powder additive manufacturing processes for metallic biomaterials
Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F., & Mohamed, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2017.12.058 · Cited by 379 · cited 3×
“The oxygen level during the 3D printing process could be lowered (<10 ppm) inside an inert chamber to prevent oxidation of the material [34].”
BackgroundInfluentialSola, A., & Nouri, A. (2019) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10021 · Cited by 378 · cited 1×
“Different types of undesired porosities can be classified based on their origin into (i) feedstock-related pores and (ii) processing-induced pores [246].”
BackgroundRationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials
Kolken, H. M. A., Janbaz, S., Leeflang, S. M. A., Lietaert, K., Weinans, H. H., & Zadpoor, A. A. (2018) · Materials Horizons · doi:10.1039/c7mh00699c · Cited by 374 · cited 3×
“prevent retraction from the host bone during the physiological activities [187].”
BackgroundInfluentialDesign, analysis and manufacturing of lattice structures: an overview
Helou, M., & Kara, S. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2017.1407456 · Cited by 370
Liu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368 · cited 1×
“Fatigue cracks cause major deflections in both equiaxed grain zones and the coarse columnar grain zones [268].”
BackgroundHan, C., Li, Y., Wang, Q., Wen, S., Wei, Q., Yan, C., Hao, L., Liu, J., & Shi, Y. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.01.013 · Cited by 367
Biomaterial Design Strategies for the Treatment of Spinal Cord Injuries
Straley, K. S., Foo, C. W. P., & Heilshorn, S. C. (2010) · Journal of Neurotrauma · doi:10.1089/neu.2009.0948 · Cited by 355 · cited 1×
“molecules, such as full-length proteins enhances axonal growth and mimics a natural extracellular matrix [310,311].”
BackgroundGeometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Bidan, C. M., Kommareddy, K. P., Rumpler, M., Kollmannsberger, P., Fratzl, P., & Dunlop, J. W. C. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200159 · Cited by 341 · cited 1×
“Several studies have discussed the effect of scaffold pore shape on tissue ingrowth and vascularization [220,221].”
BackgroundMahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338 · cited 1×
“Consequently, this method can prevent stress shielding thereby promoting osseointegration [264].”
MethodMetal Binder Jetting Additive Manufacturing: A Literature Review
Li, M., Du, W., Elwany, A., Pei, Z., & Ma, C. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047430 · Cited by 334
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Balla, V. K., Banerjee, S., Bose, S., & Bandyopadhyay, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.021 · Cited by 333
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Energy absorption in lattice structures in dynamics: Experiments
Özdemir, Z., Hernández-Nava, E., Tyas, A., Warren, J. A., Fay, S., Goodall, R., Todd, I., & Askes, H. (2015) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2015.10.007 · Cited by 325 · cited 1×
“high-speed imaging system aligned with the Hopkinson bar can be used to observe the progressive collapse and shock effects in real-time with stress-time data [278].”
MethodPark, A., Wu, B., & Griffith, L. G. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00451 · Cited by 322 · cited 1×
“Fabrication of the non-metallic biomaterial powders with BJ technology (such as poly (L-lactide) (PLLA) [58], calcium phosphate [59], calcium silicate [60], and hydroxyapatite (HA) [61]) has been extensively demonstrated.”
BackgroundDesign of lattice structure for additive manufacturing
Tao, W., & Leu, M. C. (2016) · 2016 International Symposium on Flexible Automation (ISFA) · doi:10.1109/isfa.2016.7790182 · Cited by 316
Biological interactions of dental cast alloys with oral tissues
Schmalz, G. (2002) · Dental Materials · doi:10.1016/s0109-5641(01)00063-x · Cited by 308 · cited 1×
“Hence, to improve the quality of life for patients, a vast number of studies have been conducted to address these concerns and increase the duration, aesthetics, and functionality of implants [327].”
BackgroundSing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289 · cited 1×
“The promoted performance of the scaffolds with graded porosity in osteochondral reconstruction was also confirmed by in vitro and in vivo studies [215,217,218].”
ResultSelf-citationFabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288 · cited 1×
“3 mm to 3 mm [38] and the laser scan speed varies between 150 mm/min and 1.”
BackgroundMontazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Self-citationZhang, X. Z., Leary, M., Tang, H. P., Song, T., & Qian, M. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.05.002 · Cited by 285 · cited 4×
“surface quality of the internal struts can diminish the mechanical performance of the porous structures [236].”
BackgroundInfluentialThree-dimensional printing of metals for biomedical applications
Ni, J., Ling, H., Zhang, S., Wang, Z., Peng, Z., Benyshek, C., Zan, R., Miri, A. K., Li, Z., Zhang, X., et al. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100024 · Cited by 279 · cited 1×
“nized as promising candidates for fabricating biodegradable metallic orthopedic scaffolds that can be completely degraded over time to be replaced with the newly formed tissue [106,107].”
BackgroundSelf-citationAdditive manufacturing of magnesium alloys
Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F., & Sealy, M. P. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.004 · Cited by 278 · cited 1×
“nized as promising candidates for fabricating biodegradable metallic orthopedic scaffolds that can be completely degraded over time to be replaced with the newly formed tissue [106,107].”
BackgroundAn exploration of binder jetting of copper
Bai, Y., & Williams, C. B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0180 · Cited by 270
Graded/Gradient Porous Biomaterials
Miao, X., & Sun, D. (2009) · Materials · doi:10.3390/ma3010026 · Cited by 265 · cited 1×
“high porosity (or high permeability) promotes bone formation, whereas cartilage formation occurs at a lower porosity [211].”
BackgroundPowder bed fusion process: A brief review
Dev Singh, D., Mahender, T., & Raji Reddy, A. (2021) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.08.415 · Cited by 263 · cited 1×
“with high surface roughness and acceptable repeatability [18].”
BackgroundYang, E., Leary, M., Lozanovski, B., Downing, D., Mazur, M., Sarker, A., Khorasani, A., Jones, A., Maconachie, T., Bateman, S., et al. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108165 · Cited by 261 · cited 1×
“[244] found that the particles on the downward-facing surfaces of Ti–6Al–4V scaffolds with gyroid architecture fabricated by LPBF were loosely attached while the particles on upward-facing surfaces adhered more rigidly.”
BackgroundFabrication of Controlled Release Biodegradable Foams by Phase Separation
Lo, H., Ponticiello, M. S., & Leong, K. W. (1995) · Tissue Engineering · doi:10.1089/ten.1995.1.15 · Cited by 259
Vijayavenkataraman, S., Zhang, L., Zhang, S., Hsi Fuh, J. Y., & Lu, W. F. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00052 · Cited by 252 · cited 1×
“improved cell ingrowth compared to the scaffolds fabricated by traditional salt leaching (stochastic design) [196,207].”
BackgroundMechanism of bonelike apatite formation on bioactive tantalum metal in a simulated body fluid
Miyazaki, T., Kim, H., Kokubo, T., Ohtsuki, C., Kato, H., & Nakamura, T. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00188-0 · Cited by 250 · cited 1×
“An attractive feature of the Ta implants is bone-like apatite layer formation on their surface in presence of simulated body fluids that lead to strong implant-bone bonding [88].”
BackgroundMicroarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Abu Al‐Rub, R. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 249 · cited 1×
“Besides, cubical strut-based lattices with sharp corners show higher stress concentration compared to TPMS scaffolds with smooth curvy surfaces [200,201].”
BackgroundMetal Alloys for Fusion‐Based Additive Manufacturing
Zhang, D., Sun, S., Qiu, D., Gibson, M. A., Dargusch, M. S., Brandt, M., Qian, M., & Easton, M. A. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700952 · Cited by 242 · cited 1×
“fusion-based metal AM process often result in a very fine microstructure and columnar grains, especially in Ti alloys [79].”
BackgroundSelective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Manakari, V., Parande, G., & Gupta, M. (2016) · Metals · doi:10.3390/met7010002 · Cited by 241 · cited 1×
“, AZ91D, Mg–9%Al, ZK60, and WE43) has been demonstrated using LPBF technology [113].”
MethodMelancon, D., Bagheri, Z. S., Johnston, R. B., Liu, L., Tanzer, M., & Pasini, D. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.09.013 · Cited by 241
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241 · cited 2×
“Fabrication of the non-metallic biomaterial powders with BJ technology (such as poly (L-lactide) (PLLA) [58], calcium phosphate [59], calcium silicate [60], and hydroxyapatite (HA) [61]) has been extensively demonstrated.”
BackgroundMethodReview of defects in lattice structures manufactured by powder bed fusion
Echeta, I., Feng, X., Dutton, B., Leach, R., & Piano, S. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04753-4 · Cited by 239 · cited 4×
“Defect prevention The defect minimization methods can be classified into (i) process parameter optimization, (ii) post-processing methods, (iii) design strategies, and (iv) defect simulation [238] (see Fig.”
BackgroundMethodInfluentialAli, D., & Sen, S. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.07.035 · Cited by 237
Ma, S., Tang, Q., Han, X., Feng, Q., Song, J., Setchi, R., Liu, Y., Liu, Y., Goulas, A., Engstrøm, D. S., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109034 · Cited by 237
3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring
Davoodi, E., Montazerian, H., Haghniaz, R., Rashidi, A., Ahadian, S., Sheikhi, A., Chen, J., Khademhosseini, A., Milani, A. S., Hoorfar, M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b06283 · Cited by 232 · cited 1×
“side of the equation controls the relative density (in the case of solid network TPMS structures) [191].”
BackgroundSelf-citationMontazerian, H., Mohamed, M. G. A., Montazeri, M. M., Kheiri, S., Milani, A. S., Kim, K., & Hoorfar, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.040 · Cited by 232 · cited 1×
“Hence, the CAD design of TPMS scaffolds has entailed auxiliary computer programs that work based on point clouds, and image processing approaches [195].”
MethodSelf-citationAli, D., Ozalp, M., Blanquer, S. B. G., & Onel, S. (2020) · European Journal of Mechanics - B/Fluids · doi:10.1016/j.euromechflu.2019.09.015 · Cited by 231 · cited 1×
“[206], TPMS-based scaffolds showed higher permeability compared to lattice structures and the maximum wall shear stress (WSS) was attributed to the lattice structures.”
BackgroundTruscello, S., Kerckhofs, G., Bael, S. V., Pyka, G., Schrooten, J., & Oosterwyck, H. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.12.021 · Cited by 229 · cited 1×
“According to Darcy’s law, the permeability coefficient (k) relates pressure gradient to mass flux according to Equation (20) [287]: E.”
BackgroundLiang, H., Yang, Y., Xie, D., Li, L., Mao, N., Wang, C., Tian, Z., Jiang, Q., & Shen, L. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.01.012 · Cited by 229 · cited 1×
“The space is then partitioned into discrete regions called Voronoi cells [168,169].”
BackgroundButscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Dallago, M., Winiarski, B., Zanini, F., Carmignato, S., & Benedetti, M. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.019 · Cited by 222 · cited 1×
“This effect increases the as-built thickness of the struts and offsets the barycenter of the cross-sections from the visionary axis of the struts, thereby leading to waviness, varying thickness, and cross-sectional deviation (circular to ellipsoidal) [240].”
BackgroundXiu, P., Jia, Z., Lv, J., Yin, C., Cheng, Y., Zhang, K., Song, C., Leng, H., Zheng, Y., Cai, H., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05893 · Cited by 221 · cited 1×
“235 in the untreated scaffolds, bone formation was limited to the periphery of the scaffolds [266].”
BackgroundIron and iron-based alloys for temporary cardiovascular applications
Francis, A. A., Yang, Y., Virtanen, S., & Boccaccini, A. R. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5473-8 · Cited by 218 · cited 1×
“Interaction of these radicals with lipids, proteins, DNA and eventually living cells can cause detrimental effects such as heart failure, liver failure, shock, coma, and even death [93,94].”
BackgroundAdditive manufacturing of bone scaffolds
Yang, Y., Wang, G., Liang, H., Gao, C., Peng, S., Shen, L., & Shuai, C. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v5i1.148 · Cited by 214 · cited 1×
“Triply periodic minimal surfaces Triply periodic minimal surfaces (TPMS) are smooth infinite tortuous surfaces with zero mean curvature dividing the 3D space into two cocontinuous phases [189].”
BackgroundAdditively manufactured porous metallic biomaterials
Zadpoor, A. A. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00420c · Cited by 213 · cited 2×
“Biodegradable metal alloys have also been reported as load-bearing skeletal bone implants for temporary applications to support bone regeneration [286].”
BackgroundExtrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Swieszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 213 · cited 1×
“Simultaneous printing of biological components in composites with biopolymers (such as hydrogels) [360,361] along with metals has not been touched in the literature due to the harsh and incompatible”
BackgroundSelf-citationLi, Y., Yang, W., Li, X., Zhang, X., Wang, C., Meng, X., Pei, Y., Fan, X., Lan, P., Wang, C., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00331 · Cited by 210 · cited 2×
“further approved by in vivo studies through implantation in a rabbit femoral defect [15].”
BackgroundA TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering
Shi, J., Zhu, L., Li, L., Li, Z., Yang, J., & Wang, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-25750-9 · Cited by 207 · cited 1×
“Various pore shapes, porosity, and unit cell sizes can be mathematically defined and applied to each unit cell, which can be patterned along the global axes [190].”
BackgroundImpact response of additively manufactured metallic hybrid lattice materials
Harris, J. A., Winter, R. E., & McShane, G. J. (2017) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2017.02.007 · Cited by 205 · cited 1×
“[279] studied the out-of-plane compression of stainless-steel cellular materials fabricated using LPBF”
MethodWu, C., Fan, W., Zhou, Y., Luo, Y., Gelinsky, M., Chang, J., & Xiao, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30566f · Cited by 202
Gradient scaffolds for osteochondral tissue engineering and regeneration
Zhang, B., Huang, J., & Narayan, R. J. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00688b · Cited by 201 · cited 1×
“the osteochondral (OC) defects compared to those composed of single and multiphasic material types that individually support bone and cartilage formation [229].”
BackgroundSpatial Control of Functional Response in 4D-Printed Active Metallic Structures
Ma, J., Franco, B., Tapia, G., Karayagiz, K., Johnson, L., Liu, J., Arroyave, R., Karaman, I., & Elwany, A. (2017) · Scientific Reports · doi:10.1038/srep46707 · Cited by 200
Laminated Object Manufacturing of Ceramic‐Based Materials
Dermeik, B., & Travitzky, N. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000256 · Cited by 199 · cited 1×
“printing technique for metallic and ceramic materials [62].”
BackgroundLexcellent, C. (2013) · Wiley eBooks · doi:10.1002/9781118577776 · Cited by 199
Feng, J., Liu, B., Lin, Z., & Fu, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109595 · Cited by 198 · cited 1×
“Using the curvature wall thickness adjustment algorithms, in combination with finite element methods, anisotropic architectures could be reshaped to their isotropic equivalents [134,135].”
MethodCarluccio, D., Xu, C., Venezuela, J., Cao, Y., Kent, D., Bermingham, M., Demir, A. G., Previtali, B., Ye, Q., & Dargusch, M. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.12.018 · Cited by 195
Material Properties of Ti6Al4V Parts Produced by Laser Metal Deposition
Yu, J., Rombouts, M., Maes, G., & Motmans, F. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.056 · Cited by 193 · cited 1×
“A wide range of metallic biomaterials such as that of cobalt (Co) alloys [41], Ti alloys [42], Ta [43], and nickel titanium (NiTi) [44] has been successfully fabricated using the DED process.”
MethodEspaña, F. A., Balla, V. K., Bose, S., & Bandyopadhyay, A. K. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.08.006 · Cited by 190 · cited 1×
“Among various Co–Cr alloys, cobalt-chromium molybdenum (Co–Cr–Mo) has been widely processed by AM techniques [46].”
MethodPerspectives of using machine learning in laser powder bed fusion for metal additive manufacturing
Sing, S. L., Kuo, C. N., Shih, C. T., Ho, C. C., & Chua, C. K. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1944229 · Cited by 185 · cited 1×
“The ML algorithms can be trained by previous datasets to predict the optimized process parameters and consequently minimize the inconsistency of the AM parts [353,354].”
MethodHip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density
Wang, Y., Arabnejad, S., Tanzer, M., & Pasini, D. (2018) · Journal of Mechanical Design · doi:10.1115/1.4041208 · Cited by 185
Biomaterials in Spinal Implants: A Review
Warburton, A., Girdler, S. J., Mikhail, C. M., Ahn, A., & Cho, S. K. (2020) · Neurospine · doi:10.14245/ns.1938296.148 · Cited by 182 · cited 1×
“material with proper mechanical characteristics [312].”
Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
Chen, L. Y., Huang, J. C., Lin, C., Pan, C., Chen, S. Y., Yang, T.-J., Lin, D. Y., Lin, H. K., & Jang, J. S. C. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.11.061 · Cited by 182 · cited 1×
“It has been reported that hardness at the X-plane (refers to the cross-section perpendicular to the direction of laser motion) was about 20% lower than Y- and Z-planes [82].”
BackgroundMontazerian, H., Baidya, A., Haghniaz, R., Davoodi, E., Ahadian, S., Annabi, N., Khademhosseini, A., & Weiss, P. S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c10048 · Cited by 178
Self-citationLiu, W., Liu, S., & Wang, L. (2019) · Coatings · doi:10.3390/coatings9040249 · Cited by 177
Recent developments in metal additive manufacturing
Bandyopadhyay, A., Zhang, Y., & Bose, S. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.001 · Cited by 175 · cited 1×
“, less than 100–150 μm in case of LPBF), the deviation of the manufactured structures from the CAD models are usually low enough to be ignored or compensated with post-processing and usually the experimental data can be reliably validated by simulation [11,180].”
BackgroundLowther, M., Louth, S., Davey, A. V., Hussain, A., Ginestra, P. S., Carter, L., Eisenstein, N., Grover, L. M., & Cox, S. C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.033 · Cited by 173
Keshavarzkermani, A., Esmaeilizadeh, R., Ali, U., Enrique, P. D., Mahmoodkhani, Y., Zhou, Y., Bonakdar, A., & Toyserkani, E. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138081 · Cited by 172 · cited 1×
“High thermal cyclic gradients and fast cooling rates during the melting and solidification stages result in significant residual stresses [25].”
BackgroundSelf-citationComparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis
Wang, H., Su, K., Su, L., Liang, P., Ji, P., & Wang, C. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109908 · Cited by 169 · cited 1×
“Note that the porous Ta implants cannot substitute those made of Ti due to the high density, cost, and high melting point that makes Ta more challenging to process [91].”
BackgroundLewis, P. L., Green, R. M., & Shah, R. N. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.042 · Cited by 167
Recent advancements in Fe-based biodegradable materials for bone repair
Gorejová, R., Haverová, L., Oriňaková, R., Oriňak, A., & Oriňak, M. (2019) · Journal of Materials Science · doi:10.1007/s10853-018-3011-z · Cited by 166 · cited 2×
“316L is considered as a subclass of ferrous alloys that contains chromium (Cr) and nickel (Ni) and is one of the well-known food and drug administration (FDA) approved ferrous metals vastly used for dental and orthopedic implants as well as surgical instruments [94].”
BackgroundA Review of the Selective Laser Melting Lattice Structures and Their Numerical Models
Alomar, Z., & Concli, F. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000611 · Cited by 166 · cited 6×
“The surface finish of additively manufactured implants is of utmost importance due to its cell behavior regulatory effect and is primarily engineered at the post-processing steps [242].”
BackgroundInfluentialQuality analysis in metal additive manufacturing with deep learning
Li, X., Jia, X., Yang, Q., & Lee, J. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01549-2 · Cited by 163 · cited 1×
“Hence, quality control techniques for inspecting the manufactured parts for any defects as well as in situ monitoring during the AM process are necessary [13,14].”
BackgroundGuo, S., Lu, Y., Wu, S., Liu, L., He, M., Zhao, C., Gan, Y., Lin, J., Luo, J., Xu, X., et al. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.126 · Cited by 163
Zhang, X.-Y., Fang, G., Xing, L.-L., Liu, W., & Zhou, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.064 · Cited by 162 · cited 1×
“[290] studied the permeability of graded Ti–6Al–4V scaffolds over a wide range of porosity (38–75%) and pore size (250–450 μm).”
BackgroundBrief Overview on Nitinol as Biomaterial
Wadood, A. (2016) · Advances in Materials Science and Engineering · doi:10.1155/2016/4173138 · Cited by 162 · cited 1×
“corrosion resistance, and biocompatibility [125].”
Bagheri, Z. S., Melancon, D., Liu, L., Johnston, R. B., & Pasini, D. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.04.041 · Cited by 162 · cited 2×
“[239] introduced a design-oriented strategy to reduce strut size deviations in Ti–6Al–4V porous biomaterials manufactured by LPBF.”
BackgroundThe Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
Tamburrino, F., Graziosi, S., & Bordegoni, M. (2018) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4040131 · Cited by 160
Repair of injured spinal cord using biomaterial scaffolds and stem cells
Shrestha, B., Coykendall, K., Li, Y., Moon, A., Priyadarshani, P., & Yao, L. (2014) · Stem Cell Research & Therapy · doi:10.1186/scrt480 · Cited by 160 · cited 1×
“molecules, such as full-length proteins enhances axonal growth and mimics a natural extracellular matrix [310,311].”
Background3D Printing Technologies in Metallic Implants: A Thematic Review on the Techniques and Procedures
Attarilar, S., Ebrahimi, M., Djavanroodi, F., Fu, Y., Wang, L., & Yang, J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.306 · Cited by 159 · cited 1×
“several benefits, a large amount of waste materials, and low printing speed (especially for complex objects [63,68]) are among the limiting”
Background3D bioprinting applications in neural tissue engineering for spinal cord injury repair
Bedir, T., Ulag, S., Ustundag, C. B., & Gunduz, O. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110741 · Cited by 155 · cited 1×
“Although significant progress has been made thus far in clinical treatments, still therapeutics are failed to completely recover the nerve functions [309].”
BackgroundKapat, K., Srivas, P. K., Rameshbabu, A. P., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13960 · Cited by 154
Kanayama, M., Cunningham, B. W., Haggerty, C. J., Abumi, K., Kaneda, K., & McAfee, P. C. (2000) · Journal of Neurosurgery Spine · doi:10.3171/spi.2000.93.2.0259 · Cited by 152
Current status and challenges of Additive manufacturing in orthopaedics: An overview
Javaid, M., & Haleem, A. (2018) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2018.05.008 · Cited by 151 · cited 3×
“High cost, long-term effects, and government regulations represent some of the most important challenges of AM [340,344].”
BackgroundIn vivo reprogramming of wound-resident cells generates skin epithelial tissue
Kurita, M., Araoka, T., Hishida, T., O’Keefe, D. D., Takahashi, Y., Sakamoto, A., Sakurai, M., Suzuki, K., Wu, J., Yamamoto, M., et al. (2018) · Nature · doi:10.1038/s41586-018-0477-4 · Cited by 148
Galati, M., & Minetola, P. (2019) · Materials · doi:10.3390/ma12244122 · Cited by 147
Afshar, M., Anaraki, A. P., & Montazerian, H. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.06.051 · Cited by 144 · cited 1×
“The computational and experimental studies on the cylindrical scaffolds [11,212] suggest that radially graded porous TPMS scaffolds show enhanced fluid biopermeability compared to uniform porosity counterparts.”
BackgroundSelf-citationAnisotropy in the impact toughness of selective laser melted Ti–6Al–4V alloy
Wu, M.-W., Lai, P.-H., & Chen, J.-K. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.10.045 · Cited by 137 · cited 1×
“[81] characterized anisotropy in terms of impact toughness for Ti alloys.”
BackgroundMetallic implants with properties and latest production techniques: a review
Pandey, A., Awasthi, A., & Saxena, K. K. (2020) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2020.1731236 · Cited by 136 · cited 2×
“Hence, Co–Cr–Mo alloys are considered to be suitable candidates for hip implants under excessive wear due to their promising wear resistance properties [78].”
BackgroundThe design of additively manufactured lattices to increase the functionality of medical implants
Burton, H. E., Eisenstein, N., Lawless, B. M., Jamshidi, P., Aristizabal, M., Addison, O., Shepherd, D. E. T., Attallah, M. M., Grover, L. M., & Cox, S. C. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.052 · Cited by 136 · cited 1×
“ISO 7206-4 standard [273], the hip implants are required to be oriented in specific angles while the lower portion of the implant is embedded in a cement-based casting material [274] (Fig.”
BackgroundMahmoud, D., Al-Rubaie, K. S., & Elbestawi, M. A. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.106180 · Cited by 136 · cited 1×
“Balling effect leads to the formation of spherical beads which cause a rough surface [245].”
BackgroundApplication of Machine Learning in 3D Bioprinting: Focus on Development of Big Data and Digital Twin
An, J., Chua, C. K., & Mironov, V. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.342 · Cited by 130 · cited 1×
“The ML algorithms can be trained by previous datasets to predict the optimized process parameters and consequently minimize the inconsistency of the AM parts [353,354].”
MethodSmart materials in cardiovascular implants: Shape memory alloys and shape memory polymers
Holman, H. L., Kavarana, M. N., & Rajab, T. K. (2020) · Artificial Organs · doi:10.1111/aor.13851 · Cited by 128 · cited 1×
“[126, 127] studied nitinol degradation in biological and physiological fluids and evaluated the corrosion resistance of nitinol along with surface morphology.”
BackgroundMicrostructure and corrosion behavior of laser processed NiTi alloy
Marattukalam, J. J., Singh, A. K., Datta, S., Das, M., Balla, V. K., Bontha, S., & Kalpathy, S. K. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.07.067 · Cited by 127 · cited 2×
“A wide range of metallic biomaterials such as that of cobalt (Co) alloys [41], Ti alloys [42], Ta [43], and nickel titanium (NiTi) [44] has been successfully fabricated using the DED process.”
BackgroundMethodLietaert, K., Cutolo, A., Boey, D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-23414-2 · Cited by 126
Montazerian, H., Zhianmanesh, M., Davoodi, E., Milani, A. S., & Hoorfar, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.006 · Cited by 125
Self-citationThe design and in vivo testing of a locally stiffness-matched porous scaffold
Ghouse, S., Reznikov, N., Boughton, O. R., Babu, S., Ng, K. C. G., Blunn, G. W., Cobb, J. P., Stevens, M. M., & Jeffers, J. R. T. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.02.017 · Cited by 125 · cited 1×
“Gradient mechanical properties can also be achieved by varying the laser parameters during the AM process resulting in struts with various thicknesses distribution [175].”
BackgroundKumar, A. Y., Wang, J., Bai, Y., Huxtable, S. T., & Williams, C. B. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108001 · Cited by 125 · cited 1×
“As opposed to the LPBF process, BJ enables the manufacturing of high reflectivity materials [53].”
BackgroundKadkhodapour, J., Montazerian, H., Darabi, A., Zargarian, A., & Schmauder, S. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.09.018 · Cited by 122 · cited 1×
“failure mechanism of the TPMS structures can be characterized by either 45 shear band formation (mostly in bending dominated structures) or layer-by-layer collapse (mostly in stretching dominated structures) [197,198] as shown in Fig.”
BackgroundSelf-citationMetal Additive Manufacturing Parts Inspection Using Convolutional Neural Network
Cui, W., Zhang, Y., Zhang, X., Li, L., & Liou, F. (2020) · Applied Sciences · doi:10.3390/app10020545 · Cited by 120 · cited 1×
“Hence, quality control techniques for inspecting the manufactured parts for any defects as well as in situ monitoring during the AM process are necessary [13,14].”
BackgroundDu, Y. T., Liang, H., Xie, D., Mao, N., Zhao, J., Tian, Z., Wang, C., & Shen, L. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.121968 · Cited by 120 · cited 1×
“To better mimic the natural structure of bone, many studies have focused on designing functionally graded heterogeneous stochastic implants by spatially changing unit cell size, strut thickness, and porosity [167,172,173].”
BackgroundDesign and properties of biomimetic irregular scaffolds for bone tissue engineering
Chen, H., Liu, Y., Wang, C., Zhang, A., Chen, B., Han, Q., & Wang, J. (2021) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2021.104241 · Cited by 119 · cited 1×
“To better mimic the natural structure of bone, many studies have focused on designing functionally graded heterogeneous stochastic implants by spatially changing unit cell size, strut thickness, and porosity [167,172,173].”
BackgroundJeon, J. M., Park, J. M., Yu, J., Kim, J. G., Seong, Y., Park, S. H., & Kim, H. S. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138152 · Cited by 118 · cited 1×
“[98] investigated the microstructural and mechanical anisotropy of 316L”
BackgroundAdvances in Bioprinting Technologies for Craniofacial Reconstruction
Visscher, D. O., Farré-Guasch, E., Helder, M. N., Gibbs, S., Forouzanfar, T., van Zuijlen, P. P. M., & Wolff, J. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.04.001 · Cited by 114
Xiong, Y., Wang, W., Gao, R.-N., Zhang, H., Dong, L., Qin, J., Wang, B., Jia, W., & Li, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108994 · Cited by 113 · cited 1×
“The average of the axial bite forces for normal humans varies in different areas of the jaw and may reach 500 N in the canine area, 600 N in the premolar area, and 800 N in the molar area [328].”
BackgroundGhouse, S., Babu, S., Nai, K., Hooper, P. A., & Jeffers, J. R. T. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.024 · Cited by 113
Stress-based design of thermal structures via topology optimization
Deaton, J. D., & Grandhi, R. V. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1331-z · Cited by 113
Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces
Zhianmanesh, M., Varmazyar, M., & Montazerian, H. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01400 · Cited by 112 · cited 5×
“porosity, pore interconnectivity, and micro-topological surface features are required [11].”
BackgroundInfluentialSelf-citationMontazerian, H., Rashidi, A., Dalili, A., Najjaran, H., Milani, A. S., & Hoorfar, M. (2019) · Small · doi:10.1002/smll.201804991 · Cited by 111
Self-citation3D printing and modelling of customized implants and surgical guides for non-human primates.
Chen, X., Possel, J. K., Wacongne, C., van Ham, A. F., Klink, P. C., & Roelfsema, P. R. (2017) · Journal of Neuroscience Methods · doi:10.1016/j.jneumeth.2017.05.013 · Cited by 106
Study of Selective Laser Melting of intermetallic TiAl powder using integral analysis
Doubenskaia, M., Domashenkov, A., Smurov, I. Y., & Petrovskiy, P. V. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.02.003 · Cited by 106 · cited 2×
“cially when it comes to small size channels, powder agglomeration inside small conformal channels, and long print time [19].”
BackgroundBiomimetic biphasic scaffolds for osteochondral defect repair
Li, X., Ding, J., Wang, J., Zhuang, X., & Chen, X. (2015) · Regenerative Biomaterials · doi:10.1093/rb/rbv015 · Cited by 104 · cited 1×
“The promoted performance of the scaffolds with graded porosity in osteochondral reconstruction was also confirmed by in vitro and in vivo studies [215,217,218].”
ResultLuca, A. D., Lorenzo‐Moldero, I., Mota, C., Lepedda, A. J., Auhl, D. W., van Blitterswijk, C., & Moroni, L. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600083 · Cited by 104 · cited 1×
“[222] fabricated a 3D scaffold with pore shape gradient and analyzed its influence on”
MethodDavoodi, E., Montazerian, H., Esmaeilizadeh, R., Darabi, A. C., Rashidi, A., Kadkhodapour, J., Jahed, H., Hoorfar, M., Milani, A. S., Weiss, P. S., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20751 · Cited by 103 · cited 2×
“Gradient implants have been recently utilized to address multiple conflicting design requirements [208].”
BackgroundSelf-citationFunctional 3D Tissue Engineering Scaffolds
(2017) · Elsevier eBooks · doi:10.1016/c2015-0-05681-7 · Cited by 103
Restorative design and associated risks for peri‐implant diseases
Dixon, D. R., & London, R. M. (2019) · Periodontology 2000 · doi:10.1111/prd.12290 · Cited by 101 · cited 1×
“However, complications such as peri-implantitis and marginal bone loss remain major challenges [324,325].”
BackgroundA review of gradient stiffness hydrogels used in tissue engineering and regenerative medicine
Xia, T., Liu, W., & Yang, L. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36034 · Cited by 100 · cited 1×
“The scaffolds with gradients in the physical and chemical properties have shown promise in mechanical and biological performance [227,228].”
BackgroundSinha, R., Cámara-Torres, M., Scopece, P., Falzacappa, E. V., Patelli, A., Moroni, L., & Mota, C. (2021) · Nature Communications · doi:10.1038/s41467-020-20865-y · Cited by 100 · cited 1×
“Multimaterial 3D printing is one of the well-known methods for fabricating scaffolds with physical and chemical properties gradients; however, it is mostly used for ink-based 3D printing of multi-material non-metallic implants [230].”
MethodCoffigniez, M., Grémillard, L., Balvay, S., Lachambre, J., Adrien, J., & Boulnat, X. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101859 · Cited by 99 · cited 1×
“surgical tools and medical implants due to their biocompatibility [3], high fracture toughness [4], tunable stiffness for matching with the host tissue, high wear and corrosion resistance [5].”
BackgroundGradient nanocomposite hydrogels for interface tissue engineering
Cross, L. M., Shah, K., Palani, S., Peak, C. W., & Gaharwar, A. K. (2018) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2017.02.022 · Cited by 98 · cited 1×
“The scaffolds with gradients in the physical and chemical properties have shown promise in mechanical and biological performance [227,228].”
BackgroundDavoodi, E., Fayazfar, H. R., Liravi, F., Jabari, E., & Toyserkani, E. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.101016 · Cited by 98
Self-citationEffects of scaffold architecture on cranial bone healing
Berner, A., Woodruff, M. A., Lam, C. X. F., Arafat, M. T., Saifzadeh, S., Steck, R., Ren, J., Nerlich, M. L., Ekaputra, A. K., Gibson, I., et al. (2013) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2013.05.008 · Cited by 98 · cited 1×
“Several studies have discussed the effect of scaffold pore shape on tissue ingrowth and vascularization [220,221].”
BackgroundZhang, Z., Ibhadode, O. O., Ali, U., Dibia, F., Rahnama, P., Bonakdar, A., & Toyserkani, E. (2020) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-020-09494-x · Cited by 92 · cited 1×
“These derivatives are obtained either by direct method [147] or adjoint method [148] and are used by an optimizer to update the”
MethodSelf-citationMechanical analyses of “Shellular”, an ultralow-density material
Lee, M. G., Lee, J. W., Han, S. C., & Kang, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.040 · Cited by 92
Cramer, C. L., Nandwana, P., Lowden, R. A., & Elliott, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.04.009 · Cited by 88 · cited 1×
“is fragile, a secondary step including infiltration and/or sintering is required to strengthen the structure [49] where a powder with low-melting temperature (e.”
BackgroundFerrández-Montero, A., Lieblich, M., Benavente, R., González-Carrasco, J. L., & Ferrari, B. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101142 · Cited by 84 · cited 1×
“The Mg powder can also be integrated within a polymeric matrix to develop a printable paste for 3D printing via extrusion-based techniques [114].”
Jindal, S. K., Manzoor, F., Niall, H., & Mancuso, E. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06397-1 · Cited by 82
Characterizations of additive manufactured porous titanium implants
Basalah, A., Shanjani, Y., Esmaeili, S., & Toyserkani, E. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32764 · Cited by 80
Self-citationMarinelli, G., Martina, F., Ganguly, S., & Williams, S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.101009 · Cited by 76 · cited 1×
“Ta can also be used as a coating for bone/implant interface due to their osseointegration properties [295].”
BackgroundLozanovski, B., Downing, D., Tran, P., Shidid, D., Qian, M., Choong, P., Brandt, M., & Leary, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101092 · Cited by 76 · cited 2×
“Adopting SEFM in place of the deterministic finite element model enables considering the randomness of the system which leads to higher efficiency [242,259].”
BackgroundMethod
Cited by
Ahmed, G. H. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105863 · Cited by 224
Metadata
- Authors
- Davoodi, E., Montazerian, H., Mirhakimi, A. S., Zhianmanesh, M., Ibhadode, O., Shahabad, S. I., Esmaeilizadeh, R., Sarikhani, E., Toorandaz, S., Sarabi, S. A., Nasiri, R., Zhu, Y., Kadkhodapour, J., Li, B., Khademhosseini, A., & Toyserkani, E.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2022-09
- Volume
- 15
- Pages
- 214-249
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W4200078716
- Cited by
- 224
- References
- 243
- FWCI
- 14.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.