Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction
The DOI matches its Crossref record.
Abstract
PURPOSE The purpose of this study was to analyze mechanical behaviors of a topologically optimized and 3D-printed mandibular bone block with polyetherketoneketone (PEKK) for surgical mandibular reconstruction. MATERIALS AND METHODS 3D virtual mandibular models were reconstructed from cone beam computed tomography images. A proposed mandibular resection of the mandibular body (40 mm anterior-posteriorly) was segmented. Internal structure of the resected bone was designed with topological optimization. Dental implants and implant-supported crowns were integrated into the design. A second 3D virtual model was created with the same size and location of the defect but was reconstructed with a fibular graft and implant-supported crowns. The biomechanical behaviors of the two models were compared by finite element method (FEM) under the same boundary constraints and three loading locations, namely, central incisors, lower left and right side first molar areas. RESULTS The FEM results showed the maximum stresses and displacements of the topology optimized model were much lower than those of the model with fibular bone graft. The highest stress of the optimized mandibular model was located on the lower edge of the posterior border of bone analog, and fixation screws. The maximum displacement occurred at the lower edge of the proximal mandibular stump or the lower edge of the distal mandibular body on the contralateral site. Under the same three loading locations, the maximum stress of the optimized model significantly decreased by 67.9%, 71.9% and 68.6% compared to the fibular graft model. CONCLUSIONS The 3D printed bone analog with topological optimization is patient-specific and has advantages over the conventional fibular bone graft for surgical mandibular reconstruction. The optimized PEKK bone analog model creates more normal stress-strain trajectories than the fibular graft model and likely provides better functional and cosmetic outcomes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349
“Because PEEK has similar mechanical strength to human bones, desirable results were observed in mandibular replacements [85,153].”
Additively manufactured metallic biomaterials
Davoodi, E., Montazerian, H., Mirhakimi, A. S., Zhianmanesh, M., Ibhadode, O., Shahabad, S. I., Esmaeilizadeh, R., Sarikhani, E., Toorandaz, S., Sarabi, S. A., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.027 · Cited by 224
Crystallinity studies of PEKK and carbon fibre/PEKK composites: A review
Pérez-Martín, H., Mackenzie, P., Baidak, A., Ó Brádaigh, C. M., & Ray, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109127 · Cited by 212
Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10134-1 · Cited by 39
“With widespread applications in biomedical [13], aviation and aerospace [34] industries due to its excellent mechanical properties, low outgassing properties, high temperature tolerance, chemical resistance and processability in FFF [35–37], it is crucial to understand the properties of FFF printed PEKK.”
Background
Metadata
- Authors
- Cheng, K.-J., Liu, Y.-F., Wang, R., Zhang, J.-X., Jiang, X.-F., Dong, X.-T., & Xu, X.
- Venue
- Journal of the Mechanical Behavior of Biomedical Materials
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 107
- Pages
- 103758
- ISSN
- 1751-6161 (ISSN-L)
- OpenAlex
- W3014108105
- Cited by
- 60
- References
- 0
- FWCI
- 2.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction. https://app.cochat.ai/papers/10.1016/j.jmbbm.2020.103758
- The paper
- Cheng, K.-J., Liu, Y.-F., Wang, R., Zhang, J.-X., Jiang, X.-F., Dong, X.-T., & Xu, X. (2020). Topological optimization of 3D printed bone analog with PEKK for surgical mandibular reconstruction. Journal of the Mechanical Behavior of Biomedical Materials. https://doi.org/10.1016/j.jmbbm.2020.103758
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.