Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The isothermal tetragonal-to-monoclinic transformation of 3Y-TZP ceramics sintered at two different temperatures (1450 degrees C and 1550 degrees C) and duration (2 and 5h) is investigated at 134 degrees C in steam. Particular attention is paid to the presence of a cubic phase and its effect on isothermal aging. Sintering at 1550 degrees C can result in a significant amount of large cubic grains in the specimens, that have a detrimental impact on aging resistance, especially for the first stage of the aging process. Cubic grains appear to be enriched in yttrium, which in turn leads to a depletion of yttrium in the neighboring tetragonal grains. These grains will act as nucleation sites for tetragonal-to-monoclinic transformation. Even for specimens sintered at lower temperature, i.e. 1450 degrees C, the presence of a cubic phase is expected from the phase diagram, leading to a significant effect on aging sensitivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase Analysis in Zirconia Systems
Garvie, R. C., & Nicholson, P. S. (1972) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1972.tb11290.x · Cited by 1,614
Phase relationships in the zirconia-yttria system
Scott, H. G. (1975) · Journal of Materials Science · doi:10.1007/bf01031853 · Cited by 1,282
Low‐Temperature Aging of Y‐TZP Ceramics
Chevalier, J., Cales, B., & Drouin, J. M. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02055.x · Cited by 713
Self-citationEnvironmental degradation of zirconia ceramics
Lawson, S. (1995) · Journal of the European Ceramic Society · doi:10.1016/0955-2219(95)00035-s · Cited by 460
Cited by
State of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
The Tetragonal‐Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends
Chevalier, J., Gremillard, L., Virkar, A. V., & Clarke, D. R. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03278.x · Cited by 1,609
Self-citationWhat future for zirconia as a biomaterial?
Chevalier, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.034 · Cited by 1,228
Self-citationStabilized zirconia as a structural ceramic: An overview
Kelly, J. R., & Denry, I. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.005 · Cited by 1,172
Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants
Chevalier, J., Gremillard, L., & Deville, S. (2007) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.37.052506.084250 · Cited by 741
Self-citationLughi, V., & Sergo, V. (2010) · Dental Materials · doi:10.1016/j.dental.2010.04.006 · Cited by 692
Emerging Ceramic-based Materials for Dentistry
Denry, I., & Kelly, J. R. (2014) · Journal of Dental Research · doi:10.1177/0022034514553627 · Cited by 464
Review paper: Surface Modification for Bioimplants: The Role of Laser Surface Engineering
Kurella, A., & Dahotre, N. B. (2005) · Journal of Biomaterials Applications · doi:10.1177/0885328205052974 · Cited by 409
Zirconia based dental ceramics: structure, mechanical properties, biocompatibility and applications
Gautam, C., Joyner, J., Gautam, A., Rao, J., & Vajtai, R. (2016) · Dalton Transactions · doi:10.1039/c6dt03484e · Cited by 395
The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio
Stawarczyk, B., Özcan, M., Hallmann, L., Ender, A., Mehl, A., & Hämmerlet, C. H. F. (2013) · Clinical Oral Investigations · doi:10.1007/s00784-012-0692-6 · Cited by 352
Deville, S., Chevalier, J., & Gremillard, L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.021 · Cited by 295
Self-citationFunctionalized ceramics for biomedical, biotechnological and environmental applications
Treccani, L., Yvonne Klein, T., Meder, F., Pardun, K., & Rezwan, K. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.036 · Cited by 284
Influence of sintering conditions on low-temperature degradation of dental zirconia
Inokoshi, M., Zhang, F., De Munck, J., Minakuchi, S., Naert, I., Vleugels, J., Van Meerbeek, B., & Vanmeensel, K. (2014) · Dental Materials · doi:10.1016/j.dental.2014.03.005 · Cited by 185
“Besides the higher fraction of cubic rains in the material sintered at elevated times and temeratures, the lower average yttria content in the remaining etragonal fraction, made them more susceptible to LTD [32].”
Revolution of Current Dental Zirconia: A Comprehensive Review
Alqutaibi, A. Y., Ghulam, O., Krsoum, M., Binmahmoud, S., Taher, H., Elmalky, W., & Zafar, M. S. (2022) · Molecules · doi:10.3390/molecules27051699 · Cited by 142
“The resistance of Zir to LTD is determined by factors such as yttria content [55], grain size [56], cubic phase content [57], Al2O3 and SiO3 content [58,59], and residual stress [49].”
Background
Metadata
- Authors
- Chevalier, J., Deville, S., Münch, E., Jullian, R., & Lair, F.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2004-11
- Volume
- 25
- Issue
- 24
- Pages
- 5539-5545
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2070686029
- Cited by
- 385
- References
- 4
- FWCI
- 13.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.