Thermosensitive injectable hyaluronic acid hydrogel for adipose tissue engineering
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
A series of thermosensitive copolymer hydrogels, aminated hyaluronic acid-g-poly(N-isopropylacrylamide) (AHA-g-PNIPAAm), were synthesized by coupling carboxylic end-capped PNIPAAm (PNIPAAm-COOH) to AHA through amide bond linkages. AHA was prepared by grafting adipic dihydrazide to the HA backbone and PNIPAAm-COOH copolymer was synthesized via a facile thermo-radical polymerization technique by polymerization of NIPAAm using 4,4′-azobis(4-cyanovaleric acid) as an initiator, respectively. The structure of AHA and AHA-g-PNIPAAm copolymer was determined by 1H NMR. Two AHA-g-PNIPAAm copolymers with different weight ratios of PNIPAAm on the applicability of injectable hydrogels were characterized. The lower critical solution temperature (LCST) of AHA-g-PNIPAAm copolymers in PBS were measured as ~30°C by rheological analysis, regardless of the grafting degrees. Enzymatic resistance of AHA-g-PNIPAAm hydrogels with 28% and 53% of PNIPAAm in 100U/mL hyaluronidase/PBS at 37°C was 12.3% and 37.6% over 28 days, respectively. Equilibrium swelling ratios of AHA-g-PNIPAAm hydrogels with 28% of PNIPAAm were 21.5, and significantly decreased to 13.3 with 53% of PNIPAAm in PBS at 37°C. Results from SEM observations confirm a porous 3D AHA-g-PNIPAAm hydrogel structure with interconnected pores after freeze-drying and the pore diameter depends on the weight ratios of PNIPAAm. Encapsulation of human adipose-derived stem cells (ASCs) within hydrogels showed the AHA-g-PNIPAAm copolymers were noncytotoxic and preserved the viability of the entrapped cells. A preliminary in vivo study demonstrated the usefulness of the AHA-g-PNIPAAm copolymer as an injectable hydrogel for adipose tissue engineering. This newly described thermoresponsive AHA-g-PNIPAAm copolymer demonstrated attractive properties to serve as cell or pharmaceutical delivery vehicles for a variety of tissue engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Environment-sensitive hydrogels for drug delivery
Qiu, Y., & Park, K. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00203-4 · Cited by 3,911
Novel crosslinking methods to design hydrogels
Hennink, W. E., & van Nostrum, C. F. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00240-x · Cited by 1,962
Thermosensitive sol-gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00242-3 · Cited by 1,478
Thermoresponsive hydrogels in biomedical applications
Klouda, L., & Mikos, A. G. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.02.025 · Cited by 1,349 · cited 1×
“Injectable, biodegradable hydrogels capable of phase transition in response to external stimuli such as temperature represent another type of useful building blocks for biomedical applications [7,8].”
BackgroundTan, H., Chu, C. R., Payne, K. A., & Marra, K. G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.080 · Cited by 1,023
Self-citationShimizu, T., Yamato, M., Isoi, Y., Akutsu, T., Setomaru, T., Abe, K., Kikuchi, A., Umezu, M., & Okano, T. (2002) · Circulation Research · doi:10.1161/hh0302.105722 · Cited by 956
In situ gelling stimuli-sensitive block copolymer hydrogels for drug delivery
He, C., Kim, S. W., & Lee, D. S. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.01.005 · Cited by 867
Disulfide Cross-Linked Hyaluronan Hydrogels
Shu, X. Z., Liu, Y., Luo, Y., Roberts, M. C., & Prestwich, G. D. (2002) · Biomacromolecules · doi:10.1021/bm025603c · Cited by 616
Hyaluronan and its binding proteins, the hyaladherins
Toole, B. P. (1990) · Current Opinion in Cell Biology · doi:10.1016/0955-0674(90)90081-o · Cited by 425
Goa, K. L., & Benfield, P. (1994) · Drugs · doi:10.2165/00003495-199447030-00009 · Cited by 421
Photopolymerized hyaluronic acid-based hydrogels and interpenetrating networks
Park, Y. D., Tirelli, N., & Hubbell, J. A. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00420-9 · Cited by 412
Stile, R. A., Burghardt, W. R., & Healy, K. E. (1999) · Macromolecules · doi:10.1021/ma990130w · Cited by 363
Injectable scaffolds for tissue regeneration
Hou, Q., De Bank, P. A., & Shakesheff, K. M. (2004) · Journal of Materials Chemistry · doi:10.1039/b401791a · Cited by 301
Cho, J. H., Kim, S.-H., Park, K. D., Jung, M. C., Yang, W. I., Han, S. W., Noh, J. Y., & Lee, J. W. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.051 · Cited by 240
Chen, J., & Cheng, T. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600142 · Cited by 237
Hyaluronic Acid-Based Microgels and Microgel Networks for Vocal Fold Regeneration
Jia, X., Yeo, Y., Clifton, R. J., Jiao, T., Kohane, D. S., Kobler, J. B., Zeitels, S. M., & Langer, R. (2006) · Biomacromolecules · doi:10.1021/bm0604956 · Cited by 236
Rapid temperature/pH response of porous alginate-g-poly(N-isopropylacrylamide) hydrogels
Kim, J. H., Lee, S. B., Kim, S. J., & Lee, Y. M. (2002) · Polymer · doi:10.1016/s0032-3861(02)00675-4 · Cited by 231
Synthetic extracellular matrices for in situ tissue engineering
Pratt, A. B., Weber, F. E., Schmoekel, H. G., Müller, R., & Hubbell, J. A. (2004) · Biotechnology and Bioengineering · doi:10.1002/bit.10897 · Cited by 230
Nuttelman, C. R., Rice, M. A., Rydholm, A. E., Salinas, C. N., Shah, D. N., & Anseth, K. S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.09.006 · Cited by 223
Aksu, A. E., Rubin, J. P., Dudas, J. R., & Marra, K. G. (2008) · Annals of Plastic Surgery · doi:10.1097/sap.0b013e3180621ff0 · Cited by 196
Self-citationOhya, S., Nakayama, Y., & Matsuda, T. (2001) · Biomacromolecules · doi:10.1021/bm010040a · Cited by 162
Leach, J. B., Bivens, K. A., Collins, C. N., & Schmidt, C. E. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30063 · Cited by 153
Gan, T., Zhang, Y., & Guan, Y. (2009) · Biomacromolecules · doi:10.1021/bm900022m · Cited by 148
Non-viral vector delivery from PEG-hyaluronic acid hydrogels
Wieland, J. A., Houchin‐Ray, T., & Shea, L. D. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.04.015 · Cited by 140
Ha, D. I., Lee, S. B., Chong, M. S., Lee, Y. M., Kim, S. Y., & Park, Y. H. (2006) · Macromolecular Research · doi:10.1007/bf03219073 · Cited by 131
Ibusuki, S., Fujii, Y., Iwamoto, Y., & Matsuda, T. (2003) · Tissue Engineering · doi:10.1089/107632703764664846 · Cited by 126
Masters, K. S., Shah, D. N., Walker, G., Leinwand, L. A., & Anseth, K. S. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30149 · Cited by 122
Mao, Z., Ma, L., Yan, J., Yan, M., Gao, C., & Shen, J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.033 · Cited by 116
Lee, S. B., Ha, D. I., Cho, S. K., Kim, S. J., & Lee, Y. M. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20265 · Cited by 107
Protein-Reactive, Thermoresponsive Copolymers with High Flexibility and Biodegradability
Guan, J., Hong, Y., Ma, Z., & Wagner, W. R. (2008) · Biomacromolecules · doi:10.1021/bm701265j · Cited by 90
FGF-2 Enhances Vascularization for Adipose Tissue Engineering
Marra, K. G., Defail, A. J., Clavijo‐Alvarez, J. A., Badylak, S. F., Taieb, A., Schipper, B. M., Bennett, J., & Rubin, J. P. (2008) · Plastic & Reconstructive Surgery · doi:10.1097/01.prs.0000305517.93747.72 · Cited by 78
Self-citationWang, L., Tu, K., Li, Y., Zhang, J., Jiang, L., & Zhang, Z. (2002) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(02)00126-8 · Cited by 66
Motokawa, K., Hahn, S. K., NAKAMURA, T., Miyamoto, H., & Shimoboji, T. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30759 · Cited by 59
Synthesis and characterization of thermosensitive chitosan copolymer as a novel biomaterial
Lee, J. W., Jung, M. C., Park, H. D., Park, K. D., & Ryu, G. H. (2004) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/1568562041526496 · Cited by 56
Wang, J., Chen, L., Zhao, Y., Guo, G., & Zhang, R. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3593-0 · Cited by 51
Cited by
Biopolymer-Based Hydrogels As Scaffolds for Tissue Engineering Applications: A Review
Van Vlierberghe, S., Dubruel, P., & Schacht, E. (2011) · Biomacromolecules · doi:10.1021/bm200083n · Cited by 1,716
Injectable and biodegradable hydrogels: gelation, biodegradation and biomedical applications
Li, Y., Rodrigues, J., & Tomás, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15203c · Cited by 1,445
Design properties of hydrogel tissue-engineering scaffolds
Zhu, J., & Marchant, R. E. (2011) · Expert Review of Medical Devices · doi:10.1586/erd.11.27 · Cited by 1,430
Alginate-Based Biomaterials for Regenerative Medicine Applications
Sun, J., & Tan, H. (2013) · Materials · doi:10.3390/ma6041285 · Cited by 1,361
Self-citationIn situ forming injectable hydrogels for drug delivery and wound repair
Dimatteo, R., Darling, N. J., & Segura, T. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.03.007 · Cited by 896
Metadata
- Authors
- Tan, H., Ramirez, C. M., Miljkovic, N., Li, H., Rubin, J. P., & Marra, K. G.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2009-12
- Volume
- 30
- Issue
- 36
- Pages
- 6844-6853
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W1982480837
- Cited by
- 367
- References
- 36
- FWCI
- 11.54
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.