The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Biochar production through slow pyrolysis of different biomass materials: Seeking the best operating conditions
Open accessAbstract
The effect of three operating parameters (peak temperature, pressure, and pyrolysis atmosphere) during the slow pyrolysis of three biomass sources (corn stover, vine shoots, and two-phase olive mill waste) was extensively analyzed. A 2-level full factorial design of experiments was adopted to assess the effect of the above-mentioned factors on the potential stability of biochar as well as the yields of the main pyrolysis products. To evaluate the effect of the biomass feedstock, the design was divided into three blocks (one per biomass feedstock). Results from the statistical analyses indicated that the properties of biochar related to its potential stability were mainly affected by the peak temperature and, to a lesser extent, the biomass feedstock. A significant increase in the yield of produced gas was observed when pressure was raised. This increase in the total gas yield was in part due to a higher release of CO, CH4, and H2. Using a pyrolysis atmosphere of CO2 (instead of N2) did not result in any remarkable change in neither the distribution of the pyrolysis products nor the potential stability of biochar. However, when CO2 was used as carrier gas, a significant increase in the yield of CO, at the expense of produced CO2, was observed. The findings reported herein suggest that processing biomass through pressurized slow pyrolysis under CO2 atmosphere is interesting to simultaneously obtain two valuable products: a biochar with an appropriate carbon sequestration potential, and a produced gas with an appropriate composition for energy recovery purposes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ronsse, F., van Hecke, S., Dickinson, D., & Prins, W. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12018 · Cited by 1,000
(2010) · Joint Research Centre (European Commission) · doi:10.2788/472 · Cited by 851
Quality variations of poultry litter biochar generated at different pyrolysis temperatures
Song, W., & Guo, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.018 · Cited by 693
The effect of pyrolysis conditions on biochar stability as determined by three methods
Crombie, K., Mašek, O., Sohi, S. P., Brownsort, P., & Cross, A. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12030 · Cited by 533
Harvey, O. R., Kuo, L.-J., Zimmerman, A. R., Louchouarn, P., Amonette, J. E., & Herbert, B. E. (2012) · Environmental Science & Technology · doi:10.1021/es2040398 · Cited by 429
Attainment of the Theoretical Yield of Carbon from Biomass
Antal, M. J., Allen, S. G., Dai, X., Shimizu, B., Tam, M. S., & Grønli, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000511u · Cited by 265
A method for screening the relative long‐term stability of biochar
Cross, A., & Sohi, S. P. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12035 · Cited by 247
Cited by
Dai, Y., Zhang, N., Xing, C., Cui, Q., & Sun, Q. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.01.161 · Cited by 935
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
An overview of the effect of pyrolysis process parameters on biochar stability
Leng, L., & Huang, H. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.030 · Cited by 503
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
Akhil, D., Lakshmi, D., Kartik, A., Vo, D.-V. N., Arun, J., & Gopinath, K. P. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01167-7 · Cited by 296
Metadata
- Authors
- Manyà, J. J., Azuara, M., & Manso, J. A.
- Venue
- Biomass and Bioenergy
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 117
- Pages
- 115-123
- ISSN
- 0961-9534 (ISSN-L)
- OpenAlex
- W2797711534
- Cited by
- 177
- References
- 7
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biochar production through slow pyrolysis of different biomass materials: Seeking the best operating conditions. https://app.cochat.ai/papers/10.1016/j.biombioe.2018.07.019
- The paper
- Manyà, J. J., Azuara, M., & Manso, J. A. (2018). Biochar production through slow pyrolysis of different biomass materials: Seeking the best operating conditions. Biomass and Bioenergy. https://doi.org/10.1016/j.biombioe.2018.07.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.