Bead milling disruption kinetics of microalgae: Process modeling, optimization and application to biomolecules recovery from Chlorella sorokiniana
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Industrial development of microalgae biomass valorization relies on process optimization and controlled scale-up. Both need robust modeling: (i) for biomass production and (ii) for integrated processes in the downstream processing (DSP). Cell disruption and primary fractionation are key steps in DSP. In this study, a kinetic model, including microalgal cell size distribution, was developed for Chlorella sorokiniana disruption in continuous bead milling. Glass beads of 0.4 mm size at impeller tip velocity of 14 m.s-1 were used as optimal conditions for efficient cell disruption. These conditions allowed faster disruption of big cells than small ones. A modified expression of the Stress Number, including cell size effect, was then proposed and validated. Separation of starch, proteins and chlorophyll by mild centrifugation was studied as function of the disruption parameters. Low energy consumption conditions led to extreme comminution. An intermediate zone drew attention for allowing moderate energy consumption and efficient metabolites separation by centrifugation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodiesel from microalgae beats bioethanol
Chisti, Y. (2008) · Trends in Biotechnology · doi:10.1016/j.tibtech.2007.12.002 · Cited by 2,128
Microalgae biorefinery: High value products perspectives
Chew, K. W., Yap, J. Y., Show, P. L., Suan, N. H., Juan, J. C., Ling, T. C., Lee, D.-J., & Chang, J.-S. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.006 · Cited by 1,336
Techno-Economic Analysis of Autotrophic Microalgae for Fuel Production
Davis, R., Aden, A., & Pienkos, P. T. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.04.018 · Cited by 1,069
Microalgae for the production of bulk chemicals and biofuels
Wijffels, R. H., Barbosa, M. J., & Eppink, M. H. M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.215 · Cited by 522
Food commodities from microalgae
Draaisma, R. B., Wijffels, R. H., (Ellen) Slegers, P., Brentner, L. B., Roy, A., & Barbosa, M. J. (2013) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2012.09.012 · Cited by 432
Balasubramanian, S., Allen, J. D., Kanitkar, A., & Boldor, D. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.09.119 · Cited by 283
de Winter, L., Klok, A. J., Cuaresma Franco, M., Barbosa, M. J., & Wijffels, R. H. (2013) · Algal Research · doi:10.1016/j.algal.2013.09.001 · Cited by 76
Simple method for measuring the spectral absorption cross-section of microalgae
Kandilian, R., Soulies, A., Pruvost, J., Rousseau, B., Legrand, J., & Pilon, L. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.02.039 · Cited by 62
Self-citation
Cited by
Current Bottlenecks and Challenges of the Microalgal Biorefinery
Gifuni, I., Pollio, A., Safi, C., Marzocchella, A., & Olivieri, G. (2019) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.09.006 · Cited by 281
Self-citationPhycocyanin from Spirulina: A Review of Extraction Methods and Stability
Pez Jaeschke, D., Rocha Teixeira, I., Damasceno Ferreira Marczak, L., & Domeneghini Mercali, G. (2021) · Food Research International · doi:10.1016/j.foodres.2021.110314 · Cited by 254
Microalgae-based products: Food and public health
Ferreira de Oliveira, A. P., & Bragotto, A. P. A. (2022) · Future Foods · doi:10.1016/j.fufo.2022.100157 · Cited by 190
Karabulut, G., Purkiewicz, A., & Goksen, G. (2024) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.13372 · Cited by 85
Nunes, E., Odenthal, K., Nunes, N., Fernandes, T., Fernandes, I. A., & Pinheiro de Carvalho, M. A. A. (2024) · Algal Research · doi:10.1016/j.algal.2024.103638 · Cited by 53
Metadata
- Authors
- Zinkoné, T. R., Gifuni, I., Lavenant, L., Pruvost, J., & Marchal, L.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 267
- Pages
- 458-465
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2884453986
- Cited by
- 72
- References
- 8
- FWCI
- 1.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.