The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Pyrolysis of waste biomass and plastics for production of biochar and its use for removal of heavy metals from aqueous solution
Open accessAbstract
The aim of this work was to study the pyrolysis of waste biomass and plastics and use the produced biochar for the removal of heavy metals from aqueous solution. The batch experiments of Fe, Ni, Cu, Cr, Cd and Pb with biochars and plastic chars were carried for determining the effects of various experimental parameters (feedstock, contact time, adsorbent dose, pH and pyrolysis temperature). The isothermal sorption models demonstrated that the sorption capacities of biochars are higher in comparison to the plastic chars. The maximum removal efficiency shown by biochars and plastic chars at pH 4 was 99.86% and 99.93%, respectively. Both the carbon materials are thereby recognized as an environment-friendly and efficient pollutant control material at various studied parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects
Tomczyk, A., Sokołowska, Z., & Boguta, P. (2020) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-020-09523-3 · Cited by 2,948
Yang, X., Wan, Y., Zheng, Y., He, F., Yu, Z., Huang, J., Wang, H., Ok, Y. S., Jiang, Y., & Gao, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.119 · Cited by 1,527
Sun, Y., Gao, B., Yao, Y., Fang, J., Zhang, M., Zhou, Y., Chen, H., & Yang, L. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.10.081 · Cited by 854
Influence of feedstock source and pyrolysis temperature on biochar bulk and surface properties
Suliman, W., Harsh, J. B., Abu-Lail, N. I., Fortuna, A.-M., Dallmeyer, I., & Garcia-Perez, M. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.11.010 · Cited by 585
Zhao, S.-X., Ta, N., & Wang, X.-D. (2017) · Energies · doi:10.3390/en10091293 · Cited by 585
Wang, L., Wang, Y., Ma, F., Tankpa, V., Bai, S., Guo, X., & Wang, X. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.011 · Cited by 493
Rafiq, M. K., Bachmann, R. T., Rafiq, M. T., Shang, Z., Joseph, S., & Long, R. (2016) · PLOS ONE · doi:10.1371/journal.pone.0156894 · Cited by 376
Shaaban, A., Se, S.-M., Dimin, M. F., Juoi, J. M., Mohd Husin, M. H., & Mitan, N. M. M. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.01.021 · Cited by 268
Efficient removal of arsenic using plastic waste char: Prevailing mechanism and sorption performance
Singh, E., Kumar, A., Khapre, A., Saikia, P., Shukla, S. K., & Kumar, S. (2020) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.101095 · Cited by 76
Self-citation
Cited by
Technologies and perspectives for achieving carbon neutrality
Wang, F., Harindintwali, J. D., Yuan, Z., Wang, M., Wang, F., Li, S., Yin, Z., Huang, L., Fu, Y., Li, L., et al. (2021) · The Innovation · doi:10.1016/j.xinn.2021.100180 · Cited by 1,330
Effects of microplastics on the terrestrial environment: A critical review
Dissanayake, P. D., Kim, S., Sarkar, B., Oleszczuk, P., Sang, M. K., Haque, M. N., Ahn, J. H., Bank, M. S., & Ok, Y. S. (2022) · Environmental Research · doi:10.1016/j.envres.2022.112734 · Cited by 405
Hoang, H. G., Thuy, B. T. P., Lin, C., Vo, D.-V. N., Tran, H. T., Bahari, M. B., Le, V. G., & Vu, C. T. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134514 · Cited by 282
Ambika, S., Kumar, M., Pisharody, L., Malhotra, M., Kumar, G., Sreedharan, V., Singh, L., Nidheesh, P. V., & Bhatnagar, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135716 · Cited by 265
Self-citationCatalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review
Wang, Y., Akbarzadeh, A., Chong, L., Du, J., Tahir, N., & Awasthi, M. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134181 · Cited by 247
Metadata
- Authors
- Singh, E., Kumar, A., Mishra, R., You, S., Singh, L., Kumar, S., & Kumar, R.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 320
- Issue
- Pt A
- Pages
- 124278
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W3093157906
- Cited by
- 221
- References
- 9
- FWCI
- 7.76
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis of waste biomass and plastics for production of biochar and its use for removal of heavy metals from aqueous solution. https://app.cochat.ai/papers/10.1016/j.biortech.2020.124278
- The paper
- Singh, E., Kumar, A., Mishra, R., You, S., Singh, L., Kumar, S., & Kumar, R. (2021). Pyrolysis of waste biomass and plastics for production of biochar and its use for removal of heavy metals from aqueous solution. Bioresource Technology. https://doi.org/10.1016/j.biortech.2020.124278
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.