The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
One-step and large-scale fabrication of flexible and wearable humidity sensor based on laser-induced graphene for real-time tracking of plant transpiration at bio-interface
Abstract
The rapidly growing demand for humidity sensing in various applications such as noninvasive epidermal sensing, water status tracking of plants, and environmental monitoring has triggered the development of high-performance humidity sensors. In particular, timely communication with plants to understand their physiological status may facilitate preventing negative influence of environmental stress and enhancing agricultural output. In addition, precise humidity sensing at bio-interface requires the sensor to be both flexible and stable. However, challenges still exist for the realization of efficient and large-scale production of flexible humidity sensors for bio-interface applications. Here, a convenient, effective, and robust method for massive production of flexible and wearable humidity sensor is proposed, using laser direct writing technology to produce laser-induced graphene interdigital electrode (LIG-IDE). Compared to previous methods, this strategy abandons the complicated and costly procedures for traditional IDE preparation. Using graphene oxide (GO) as the humidity-sensitive material, a flexible capacitive-type GO-based humidity sensor with low hysteresis, high sensitivity (3215.25 pF/% RH), and long-term stability (variation less than ± 1%) is obtained. These superior properties enable the sensor with multifunctional applications such as noncontact humidity sensing and human breath monitoring. In addition, this flexible humidity sensor can be directly attached onto the plant leaves for real-time and long-term tracking transpiration from the stomata, without causing any damage to plants, making it a promising candidate for next-generation electronics for intelligent agriculture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Laser-induced porous graphene films from commercial polymers
Lin, J., Peng, Z., Liu, Y., Ruiz-Zepeda, F., Ye, R., Samuel, E. L. G., Yacaman, M. J., Yakobson, B. I., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms6714 · Cited by 2,946
Laser‐Induced Graphene: From Discovery to Translation
Ye, R., James, D. K., & Tour, J. M. (2019) · Advanced Materials · doi:10.1002/adma.201803621 · Cited by 942
Ultrafast Graphene Oxide Humidity Sensors
Borini, S., White, R., Wei, D., Astley, M., Haque, S., Spigone, E., Harris, N., Kivioja, J., & Ryhänen, T. (2013) · ACS Nano · doi:10.1021/nn404889b · Cited by 900
Ultrahigh humidity sensitivity of graphene oxide
Bi, H., Yin, K., Xie, X., Ji, J., Wan, S., Sun, L., Terrones, M., & Dresselhaus, M. S. (2013) · Scientific Reports · doi:10.1038/srep02714 · Cited by 707
The Future Challenges of Food and Agriculture: An Integrated Analysis of Trends and Solutions
Calicioglu, O., Flammini, A., Bracco, S., Bellù, L., & Sims, R. (2019) · Sustainability · doi:10.3390/su11010222 · Cited by 563
Compliant plant wearables for localized microclimate and plant growth monitoring
Nassar, J. M., Khan, S. M., Villalva, D. R., Nour, M., Almuslem, A. S., & Hussain, M. M. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0039-8 · Cited by 276
Recent Advances in Graphene-Based Humidity Sensors
Lv, C., Hu, C., Luo, J., Liu, S., Qiao, Y., Zhang, Z., Song, J., Shi, Y. C., Cai, J., & Watanabe, A. (2019) · Nanomaterials · doi:10.3390/nano9030422 · Cited by 262
Novel resistive-type humidity sensor based on multiwall carbon nanotube/polyimide composite films
Yoo, K.-P., Lim, L.-T., Min, N.-K., Lee, M. J., Lee, C. J., & Park, C.-W. (2010) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2009.11.041 · Cited by 230
Organic Thin‐Film Capacitive and Resistive Humidity Sensors: A Focus Review
Najeeb, M. A., Ahmad, Z., & Shakoor, R. A. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800969 · Cited by 205
Cited by
Khoshmanesh, F., Thurgood, P., Pirogova, E., Nahavandi, S., & Baratchi, S. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112946 · Cited by 204
Humidity Sensing of Stretchable and Transparent Hydrogel Films for Wireless Respiration Monitoring
Liang, Y., Ding, Q., Wang, H., Wu, Z., Li, J., Li, Z., Tao, K., Gui, X., & Wu, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00934-1 · Cited by 162
Wu, Z., Ding, Q., Li, Z., Zhou, Z., Luo, L., Tao, K., Xie, X., & Wu, J. (2022) · Science China Materials · doi:10.1007/s40843-021-2022-1 · Cited by 42
Qu, M., Guo, Y., Cai, Y., Nie, Z., & Zhang, C. (2024) · Small · doi:10.1002/smll.202310273 · Cited by 14
Metadata
- Authors
- Lan, L., Le, X., Dong, H., Xie, J., Ying, Y., & Ping, J.
- Venue
- Biosensors and Bioelectronics
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 165
- Pages
- 112360
- ISSN
- 0956-5663 (ISSN-L)
- OpenAlex
- W3038511992
- Cited by
- 394
- References
- 17
- FWCI
- 14.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: One-step and large-scale fabrication of flexible and wearable humidity sensor based on laser-induced graphene for real-time tracking of plant transpiration at bio-interface. https://app.cochat.ai/papers/10.1016/j.bios.2020.112360
- The paper
- Lan, L., Le, X., Dong, H., Xie, J., Ying, Y., & Ping, J. (2020). One-step and large-scale fabrication of flexible and wearable humidity sensor based on laser-induced graphene for real-time tracking of plant transpiration at bio-interface. Biosensors and Bioelectronics. https://doi.org/10.1016/j.bios.2020.112360
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
