The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Highly compressible ultra-light anisotropic cellulose/graphene aerogel fabricated by bidirectional freeze drying for selective oil absorption
Abstract
Abstract Low density aerogels are promising materials for oil absorption, but they typically suffer from low compressibility and elasticity. Herein, three-dimensional (3D) highly compressible, elastic, anisotropic, cellulose/graphene aerogels (CGAs) were prepared by bidirectional freeze drying. After the grafting of long carbon chains through chemical vapor deposition, the modified cellulose/graphene aerogels (MCGA) gained superhydrophobicity. The synergistic effects of flexible cellulose, stiff graphene, and the special bidirectionally aligned porous structure gave MCGA outstanding compression and recoverability properties. MCGA was able to recover 99.8% and 96.3% when compressed to 60% and 90% strain, respectively. Due to its ultra lightweight (bulk density of 5.9 mg/cm3) and high surface area (47.3 m2/g), MCGA possesses a remarkable absorption capacity of 80–197 times its weight, which surpasses all hydrophobic cellulose aerogels and most carbon-based aerogels. Furthermore, the high elasticity of MCGA facilitates fast and efficient recovery of the absorbed oil by simple mechanical squeezing, and ensures excellent performance stability over repeated use. The high compressibility and high oil recovery ability though mechanical squeezing has never been achieved by other aerogels. Hence, MCGA can serve as a promising super absorbent material for selective oil absorption and recovery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Long-Term Ecosystem Response to the Exxon Valdez Oil Spill
Peterson, C. H., Rice, S. D., Short, J. W., Esler, D., Bodkin, J. L., Ballachey, B. E., & Irons, D. B. (2003) · Science · doi:10.1126/science.1084282 · Cited by 1,582
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Cellulose Aerogels: Synthesis, Applications, and Prospects
Long, L.-Y., Weng, Y.-X., & Wang, Y.-Z. (2018) · Polymers · doi:10.3390/polym10060623 · Cited by 568
MOF based engineered materials in water remediation: Recent trends
Rego, R. M., Kuriya, G., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123605 · Cited by 384
Zhi, D., Li, T., Li, J., Ren, H., & Meng, F. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108642 · Cited by 375
Chen, X., Liu, H., Zheng, Y., Zhai, Y., Liu, X., Liu, C., Mi, L., Guo, Z., & Shen, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14688 · Cited by 357
Jing, X., Li, H., Mi, H.-Y., Liu, Y.-J., Feng, P.-Y., Tan, Y.-M., & Turng, L.-S. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.05.082 · Cited by 296
Self-citationDe France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Nanocellulose-based lightweight porous materials: A review
Sun, Y., Chu, Y., Wu, W., & Xiao, H. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117489 · Cited by 266
Smart fire-warning materials and sensors: Design principle, performances, and applications
Lv, L.-Y., Cao, C.-F., Qu, Y.-X., Zhang, G.-D., Zhao, L., Cao, K., Song, P., & Tang, L.-C. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100690 · Cited by 266
Low density and high strength nanofibrillated cellulose aerogel for thermal insulation application
Gupta, P., Singh, B., Agrawal, A. K., & Maji, P. K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.031 · Cited by 262
Metadata
- Authors
- Mi, H.-Y., Jing, X., Politowicz, A. L., Chen, E., Huang, H.-X., & Turng, L.-S.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 132
- Pages
- 199-209
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2793150719
- Cited by
- 362
- References
- 60
- FWCI
- 14.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.