The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Highly compressible ultra-light anisotropic cellulose/graphene aerogel fabricated by bidirectional freeze drying for selective oil absorption
Abstract
Abstract Low density aerogels are promising materials for oil absorption, but they typically suffer from low compressibility and elasticity. Herein, three-dimensional (3D) highly compressible, elastic, anisotropic, cellulose/graphene aerogels (CGAs) were prepared by bidirectional freeze drying. After the grafting of long carbon chains through chemical vapor deposition, the modified cellulose/graphene aerogels (MCGA) gained superhydrophobicity. The synergistic effects of flexible cellulose, stiff graphene, and the special bidirectionally aligned porous structure gave MCGA outstanding compression and recoverability properties. MCGA was able to recover 99.8% and 96.3% when compressed to 60% and 90% strain, respectively. Due to its ultra lightweight (bulk density of 5.9 mg/cm3) and high surface area (47.3 m2/g), MCGA possesses a remarkable absorption capacity of 80–197 times its weight, which surpasses all hydrophobic cellulose aerogels and most carbon-based aerogels. Furthermore, the high elasticity of MCGA facilitates fast and efficient recovery of the absorbed oil by simple mechanical squeezing, and ensures excellent performance stability over repeated use. The high compressibility and high oil recovery ability though mechanical squeezing has never been achieved by other aerogels. Hence, MCGA can serve as a promising super absorbent material for selective oil absorption and recovery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Long-Term Ecosystem Response to the Exxon Valdez Oil Spill
Peterson, C. H., Rice, S. D., Short, J. W., Esler, D., Bodkin, J. L., Ballachey, B. E., & Irons, D. B. (2003) · Science · doi:10.1126/science.1084282 · Cited by 1,582
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
Pan, L., Chortos, A., Yu, G., Wang, Y., Isaacson, S., Allen, R., Shi, Y., Dauskardt, R., & Bao, Z. (2014) · Nature Communications · doi:10.1038/ncomms4002 · Cited by 1,519
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., & Greer, J. R. (2014) · Science · doi:10.1126/science.1255908 · Cited by 1,498
Ultralight and Highly Compressible Graphene Aerogels
Hu, H., Zhao, Z., Wan, W., Gogotsi, Y., & Qiu, J. (2013) · Advanced Materials · doi:10.1002/adma.201204530 · Cited by 1,383
Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality
Si, Y., Yu, J., Tang, X., Ge, J., & Ding, B. (2014) · Nature Communications · doi:10.1038/ncomms6802 · Cited by 1,148
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Spongy Graphene as a Highly Efficient and Recyclable Sorbent for Oils and Organic Solvents
Bi, H., Xie, X., Yin, K., Zhou, Y., Wan, S., He, L., Xu, F., Banhart, F., Sun, L., & Ruoff, R. S. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200888 · Cited by 1,010
Hydrophobic Nanocellulose Aerogels as Floating, Sustainable, Reusable, and Recyclable Oil Absorbents
Korhonen, J. T., Kettunen, M., Ras, R. H. A., & Ikkala, O. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200475b · Cited by 817
Ultralight, Flexible, and Fire‐Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Wu, Z., Li, C., Liang, H., Chen, J., & Yu, S. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209676 · Cited by 769
Bi, H., Yin, Z., Cao, X., Xie, X., Tan, C., Huang, X., Chen, B., Chen, F., Yang, Q., Bu, X., et al. (2013) · Advanced Materials · doi:10.1002/adma.201302435 · Cited by 667
Wu, Y., Yi, N., Huang, L., Zhang, T., Fang, S., Chang, H., Li, N., Oh, J., Lee, J. A., Kozlov, M., et al. (2015) · Nature Communications · doi:10.1038/ncomms7141 · Cited by 546
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Advanced fabrication and oil absorption properties of super-hydrophobic recycled cellulose aerogels
Feng, J., Nguyen, S. T., Fan, Z., & Duong, H. M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.034 · Cited by 462
Yang, J., Zhang, E., Li, X., Zhang, Y., Qu, J., & Yu, Z.-Z. (2016) · Carbon · doi:10.1016/j.carbon.2015.10.082 · Cited by 458
Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure
Gao, H.-L., Zhu, Y.-B., Mao, L.-B., Wang, F.-C., Luo, X.-S., Liu, Y.-Y., Lu, Y., Pan, Z., Ge, J., Shen, W., et al. (2016) · Nature Communications · doi:10.1038/ncomms12920 · Cited by 455
Surface Modification of Bacterial Cellulose Aerogels’ Web-like Skeleton for Oil/Water Separation
Sai, H., Fu, R., Xing, L., Xiang, J., Li, Z., Li, F., & Zhang, T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00846 · Cited by 436
Amphiphilic superabsorbent cellulose nanofibril aerogels
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00743c · Cited by 429
Li, J., Li, J., Meng, H., Xie, S., Zhang, B., Li, L., Ma, H., Zhang, J., & Yu, M. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14725h · Cited by 415
Zheng, Q., Cai, Z., & Gong, S. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14642a · Cited by 393
Biomimetic Architectured Graphene Aerogel with Exceptional Strength and Resilience
Yang, M., Zhao, N., Cui, Y., Gao, W., Zhao, Q., Gao, C., Bai, H., & Xie, T. (2017) · ACS Nano · doi:10.1021/acsnano.7b01815 · Cited by 389
Perumbilavil, S., Sankar, P., Priya Rose, T., & Philip, R. (2015) · Applied Physics Letters · doi:10.1063/1.4928124 · Cited by 379
Covalently bonded three-dimensional carbon nanotube solids via boron induced nanojunctions
Hashim, D. P., Narayanan, N. T., Romo-Herrera, J. M., Cullen, D. A., Hahm, M. G., Lezzi, P., Suttle, J. R., Kelkhoff, D., Muñoz-Sandoval, E., Ganguli, S., et al. (2012) · Scientific Reports · doi:10.1038/srep00363 · Cited by 372
Chen, S., He, G., Hu, H., Jin, S., Zhou, Y., He, Y., He, S., Zhao, F., & Hou, H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41436a · Cited by 311
Fatigue resistance of aligned carbon nanotube arrays under cyclic compression
Suhr, J., Victor, P., Ci, L., Sreekala, S., Zhang, X., Nalamasu, O., & Ajayan, P. M. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.186 · Cited by 306
Hou, C., Wang, H., Zhang, Q., Li, Y., & Zhu, M. (2014) · Advanced Materials · doi:10.1002/adma.201401367 · Cited by 301
Naturally Dried Graphene Aerogels with Superelasticity and Tunable Poisson's Ratio
Xu, X., Zhang, Q., Yu, Y., Chen, W., Hu, H., & Li, H. (2016) · Advanced Materials · doi:10.1002/adma.201603079 · Cited by 301
Liu, T., Huang, M., Li, X., Wang, C., Gui, C.-X., & Yu, Z.-Z. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.038 · Cited by 288
Aerostat Sampling of PCDD/PCDF Emissions from the Gulf Oil Spill In Situ Burns
Aurell, J., & Gullett, B. K. (2010) · Environmental Science & Technology · doi:10.1021/es103554y · Cited by 267
Wan, Y.-J., Zhu, P.-L., Yu, S.-H., Sun, R., Wong, C.-P., & Liao, W.-H. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.054 · Cited by 267
Laitinen, O., Suopajärvi, T., Österberg, M., & Liimatainen, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06304 · Cited by 241
Hu, H., Zhao, Z., Gogotsi, Y., & Qiu, J. (2014) · Environmental Science & Technology Letters · doi:10.1021/ez500021w · Cited by 228
He, Y., Liu, Y., Wu, T., Ma, J., Wang, X., Gong, Q., Kong, W., Xing, F., Liu, Y., & Gao, J. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.06.042 · Cited by 225
Fluorine-Free Oil Absorbents Made from Cellulose Nanofibril Aerogels
Mulyadi, A., Zhang, Z., & Deng, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10985 · Cited by 225
Highly-efficient and recyclable oil absorbing performance of functionalized graphene aerogel
Hong, J.-Y., Sohn, E.-H., Park, S., & Park, H. S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.01.066 · Cited by 220
A New Tubular Graphene Form of a Tetrahedrally Connected Cellular Structure
Bi, H., Chen, I., Lin, T., & Huang, F. (2015) · Advanced Materials · doi:10.1002/adma.201502682 · Cited by 210
Polyvinyl Alcohol-Cellulose Nanofibrils-Graphene Oxide Hybrid Organic Aerogels
Javadi, A., Zheng, Q., Payen, F., Javadi, A., Altin, Y., Cai, Z., Sabo, R., & Gong, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400171y · Cited by 193
Surface modified cellulose scaffolds for tissue engineering
Courtenay, J. C., Johns, M. A., Galembeck, F., Deneke, C., Lanzoni, E. M., Costa, C. A., Scott, J. L., & Sharma, R. I. (2017) · Cellulose · doi:10.1007/s10570-016-1111-y · Cited by 175
Hong, J., Bak, B. M., Wie, J. J., Kong, J., & Park, H. S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201403273 · Cited by 167
Ji, S., Jang, J., Cho, E., Kim, S., Kang, E., Kim, J., Kim, H., Kong, H., Kim, S., Kim, J., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700538 · Cited by 128
Fu, R., Zheng, B., Liu, J., Dresselhaus, M. S., Dresselhaus, G., Satcher, J. H., & Baumann, T. F. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200304289 · Cited by 126
Štefelová, J., Slovák, V., Siqueira, G. D. F., Olsson, R. T., Tingaut, P., Zimmermann, T., & Sehaqui, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03027 · Cited by 117
Yang, S., Chen, L., Mu, L., Hao, B., & Ma, P. (2015) · RSC Advances · doi:10.1039/c5ra03701h · Cited by 107
Qiu, S., Jiang, B. Q., Zheng, X., Zheng, J., Zhu, C., & Wu, M. (2014) · Carbon · doi:10.1016/j.carbon.2014.12.055 · Cited by 98
Yao, X., Yu, W., Xu, X., Chen, F., & Fu, Q. (2015) · Nanoscale · doi:10.1039/c4nr07402e · Cited by 95
Tao, G., Zhang, L., Hua, Z., Chen, Y., Guo, L., Zhang, J., Shu, Z., Gao, J., Chen, H., Wu, W. B., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.09.037 · Cited by 93
Chu, G. Q., Qu, D., Zussman, E., & Xu, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00361 · Cited by 89
Zhang, M., Gao, B., Cao, X., & Yang, L. (2013) · RSC Advances · doi:10.1039/c3ra44340j · Cited by 72
Mi, H., Jing, X., Salick, M. R., Cordie, T. M., & Turng, L. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.05.026 · Cited by 57
Self-citationMi, H., Jing, X., Huang, H., & Turng, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10901 · Cited by 52
Self-citationCellulose aerogel regenerated from ionic liquid solution for immobilized metal affinity adsorption
Oshima, T., Sakamoto, T., Ohe, K., & Baba, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.12.021 · Cited by 46
Effective and simple methodology to produce nanocellulose-based aerogels for selective oil removal
Tarrés, Q., Oliver-Ortega, H., Llop, M. F., Pèlach, M. À., Delgado‐Aguilar, M., & Mutjé, P. (2016) · Cellulose · doi:10.1007/s10570-016-1017-8 · Cited by 42
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Cellulose Aerogels: Synthesis, Applications, and Prospects
Long, L.-Y., Weng, Y.-X., & Wang, Y.-Z. (2018) · Polymers · doi:10.3390/polym10060623 · Cited by 568
MOF based engineered materials in water remediation: Recent trends
Rego, R. M., Kuriya, G., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123605 · Cited by 384
Zhi, D., Li, T., Li, J., Ren, H., & Meng, F. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108642 · Cited by 375
Metadata
- Authors
- Mi, H.-Y., Jing, X., Politowicz, A. L., Chen, E., Huang, H.-X., & Turng, L.-S.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 132
- Pages
- 199-209
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2793150719
- Cited by
- 362
- References
- 60
- FWCI
- 14.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.