The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Design of highly microporous activated carbons based on walnut shell biomass for H2 and CO2 storage
Open accessAbstract
Low-cost walnut shell-based carbons with high microporosity were prepared by simple one-step carbonization with chemical activation using KOH, exhibiting the promising potential to be a very good CO2 and H2 adsorbent. The physicochemical properties of the obtained carbons were characterized by N2 and CO2 adsorption isotherms, X-ray powder diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and elemental analysis. The activated carbon AC-800 was characterized by a highly developed specific surface area of 1868 cm2/g and a high micropore content of 0.94 cm3/g. It highly exhibited CO2 uptake in 1 bar was up to 9.54, 5.17, 4.33 mmol/g for 0, 25 and 40 °C, respectively. In addition, the H2 storage capacity was 3.15 mmol/g at 40 bars. Significantly, confirmed an exceptionally high dependency of CO2 and H2 uptake vs micropores structure of activated carbon. AC-800 also shows good selectivity for CO2/N2 and fast adsorption kinetics that be easily regenerated with superior cyclic stability after multiple cycles The experimental isotherm data of activated carbon produced from walnut shells were analyzed using Langmuir, Freundlich, Temkin, Sips, and Toth isotherm equations. The fitting details showed that the multitemperature Toth equation is a powerful tool to mathematically represent CO2 and H2 isotherms on activated carbon. The easy way of preparation and high capture abilities endow this kind of activated carbon attractive as a promising adsorbent for CO2 and H2 storage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650
Guidelines for the use and interpretation of adsorption isotherm models: a review
Al-Ghouti, M. A., & Da'ana, D. A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122383 · Cited by 3,535
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957 · cited 1×
“When the nT parameter measuring surface heterogeneity is equal to 1, the Toth model equation is reduced to the Langmuir isotherm [27].”
MethodUnderstanding chemical reactions between carbons and NaOH and KOH
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2003) · Carbon · doi:10.1016/s0008-6223(02)00279-8 · Cited by 1,199
Preparation and characterization of activated carbon from waste biomass
Tay, T., Ucar, S., & Karagöz, S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.011 · Cited by 446
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415 · cited 1×
“For that reason, the adsorption mechanism consists of volume-filling rather than surface cover typical of meso/macroporous materials and the adsorbates occupying these small micropores are in a liquid-like state [75,76].”
BackgroundAmmendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Ma, C., Min, J., Gong, J., Liu, X., Mu, X., Chen, X., & Tang, T. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126755 · Cited by 138
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Kaya, N., & Uzun, Z. Y. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-01063-8 · Cited by 79
Li, D., Tian, Y., Li, L., Li, J., & Zhang, H. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0041-7 · Cited by 67
Cited by
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Self-citationApplication of isotherms models and error functions in activated carbon CO2 sorption processes
Serafin, J., & Dziejarski, B. (2023) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2023.112513 · Cited by 268
Self-citationKundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Porous carbon fabrication techniques: A review
Kobina Sam, D., Li, H., Xu, Y.-T., & Cao, Y. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.01.044 · Cited by 46
Li, Y., Zhang, G., Liu, J., Li, G., & Wang, Y. (2023) · Journal of the Energy Institute · doi:10.1016/j.joei.2023.101415 · Cited by 9
Metadata
- Authors
- Serafin, J., Dziejarski, B., Cruz Junior, O. F., & Sreńscek-Nazzal, J.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2023-01
- Volume
- 201
- Pages
- 633-647
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W4295922521
- Cited by
- 210
- References
- 17
- FWCI
- 15.42
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.