The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Activation of peroxymonosulfate by graphitized hierarchical porous biochar and MnFe2O4 magnetic nanoarchitecture for organic pollutants degradation: Structure dependence and mechanism
Abstract
Abstract Three novel graphitized hierarchical porous biochar (MX) and MnFe2O4 magnetic composites (MnFe2O4/MX) have been prepared for degrading organic pollutants by peroxymonosulfate (PMS) activation. MX including MS, ML, MC synthesized using corn stems (S), leaves (L) and cores (C) as raw materials, respectively, possesses hierarchical porous structure, graphitization domains and tremendous surface area. The orange II removal effects of MX and MnFe2O4/MX outperform the corresponding carbonization products, despite that adsorption probably undertakes the major removal efficiency for MX and degradation contributes the most for MnFe2O4/MX. A structure-dependent degradation efficiency is discovered for MX and MnFe2O4/MX, among of which both MS and MnFe2O4/MS present the best removal effect, by electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS). The lowest EIS owning to its better balance between graphitization degree and specific surface area and micropore volume of MnFe2O4/MS among MnFe2O4/MX explains its best catalytic activity. The catalytic degradation occurs by the following three ways. First, the radical-induced oxidation is attained by surface-bound SO4− and OH on MnFe2O4 nanoclusters and hierarchical porous carbon nanosheets generated by one-electron reduction of PMS under the participating and coupling of Mn(III)/Mn(II), Fe(III)/Fe(II), O2/ O2−, and active sites on carbon surface. Second, non-radical pathway involves the contribution of 1O2, which is produced in a large quantity by promoted self-decomposition of PMS in presence of MnFe2O4/MS. Third, non-radical pathway is achieved through electron transfer from organic compounds as electron donator to PMS as electron acceptor mediated by graphitization structures. Taking into consideration the excellent degradation performance, easy magnetic separation, and bulk availability of MnFe2O4/MS, this work is expected to pave a new way for precision utilization of corn biomass-based biochar for environmental application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Petrie, B., Barden, R., & Kasprzyk-Hordern, B. (2015) · Water Research · doi:10.1016/j.watres.2014.08.053 · Cited by 2,614
Mohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
Chemistry of persulfates in water and wastewater treatment: A review
Wacławek, S., Lutze, H. V., Grübel, K., Padil, V. V. T., Černík, M., & Dionysiou, D. D. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.07.132 · Cited by 1,874
A rapid spectrophotometric determination of persulfate anion in ISCO
Liang, C., Huang, C.-F., Mohanty, N., & Kurakalva, R. M. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.08.043 · Cited by 1,456
Mechanism of Base Activation of Persulfate
Furman, O. S., Teel, A. L., & Watts, R. J. (2010) · Environmental Science & Technology · doi:10.1021/es1013714 · Cited by 1,396
Yun, E.-T., Lee, J. H., Kim, J., Park, H.-D., & Lee, J. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b00959 · Cited by 1,175
Ren, Y., Lin, L., Ma, J., Yang, J., Feng, J., & Fan, Z. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.10.051 · Cited by 1,121
Highly porous graphitic biomass carbon as advanced electrode materials for supercapacitors
Gong, Y., Li, D., Luo, C., Fu, Q., & Pan, C. (2017) · Green Chemistry · doi:10.1039/c7gc01681f · Cited by 1,116
Guan, Y.-H., Ma, J., Ren, Y.-M., Liu, Y.-L., Xiao, J.-Y., Lin, L.-Q., & Zhang, C. (2013) · Water Research · doi:10.1016/j.watres.2013.06.023 · Cited by 1,037
Huang, G.-X., Wang, C.-Y., Yang, C.-W., Guo, P.-C., & Yu, H.-Q. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03007 · Cited by 905
Insights into Heterogeneous Catalysis of Persulfate Activation on Dimensional-Structured Nanocarbons
Duan, X., Sun, H., Kang, J., Wang, Y., Indrawirawan, S., & Wang, S. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00774 · Cited by 799
Duan, X., Ao, Z., Zhou, L., Sun, H., Wang, G., & Wang, S. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.01.059 · Cited by 739
Activation of Persulfates by Graphitized Nanodiamonds for Removal of Organic Compounds
Lee, H., Kim, H.-I., Weon, S., Choi, W., Hwang, Y. S., Seo, J., Lee, C., & Kim, J.-H. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b02079 · Cited by 688
Xu, Y., Ai, J., & Zhang, H. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.01.023 · Cited by 683
Liu, Y., Zhang, N., Jiao, L., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201503015 · Cited by 612
Chen, X., Oh, W.-D., Hu, Z.-T., Sun, Y.-M., Webster, R. D., Li, S.-Z., & Lim, T.-T. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.11.071 · Cited by 611
Ji, Y., Dong, C., Kong, D., Lu, J., & Zhou, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.10.097 · Cited by 552
Yao, Y., Cai, Y., Lu, F., Wei, F., Wang, X., & Wang, S. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.01.027 · Cited by 510
Xiao, R., Luo, Z., Wei, Z., Luo, S., Spinney, R., Yang, W., & Dionysiou, D. D. (2018) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2017.12.005 · Cited by 482
Liang, P., Zhang, C., Duan, X., Sun, H., Liu, S., Tade, M. O., & Wang, S. (2017) · Environmental Science: Nano · doi:10.1039/c6en00633g · Cited by 466
Mechanism of Persulfate Activation by Phenols
Ahmad, M., Teel, A. L., & Watts, R. J. (2013) · Environmental Science & Technology · doi:10.1021/es400728c · Cited by 450
Ma, W., Wang, N., Fan, Y., Tong, T., Han, X., & Du, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.164 · Cited by 435
Chen, L., Ding, D., Liu, C., Cai, H., Qu, Y., Yang, S., Gao, Y., & Cai, T. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.040 · Cited by 418
Zhao, Q., Mao, Q., Zhou, Y., Wei, J., Liu, X., Yang, J., Luo, L., Zhang, J., Chen, H., Chen, H., et al. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.09.042 · Cited by 413
Qin, W., Fang, G., Wang, Y., & Zhou, D. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.215 · Cited by 412
Yin, R., Guo, W., Wang, H., Du, J., Zhou, X., Wu, Q., Zheng, H., Chang, J., & Ren, N. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.174 · Cited by 397
MnFe2O4@C Nanofibers as High-Performance Anode for Sodium-Ion Batteries
Liu, Y., Zhang, N., Yu, C., Jiao, L., & Chen, J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00942 · Cited by 392
Yun, E.-T., Yoo, H.-Y., Bae, H., Kim, H.-I., & Lee, J. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02519 · Cited by 359
Du, J., Bao, J., Liu, Y., Kim, S. H., & Dionysiou, D. D. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.177 · Cited by 347
Guo, Y., Zeng, Z., Zhu, Y., Huang, Z., Cui, Y., & Yang, J. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.08.073 · Cited by 346
Fontmorin, J. M., Burgos Castillo, R. C., Tang, W. Z., & Sillanpää, M. (2016) · Water Research · doi:10.1016/j.watres.2016.04.053 · Cited by 338
Review and perspectives on the use of magnetic nanophotocatalysts (MNPCs) in water treatment
Gómez-Pastora, J., Dominguez, S., Bringas, E., Rivero, M. J., Ortiz, I., & Dionysiou, D. D. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.140 · Cited by 323
Ma, J., Yang, Y., Jiang, X., Xie, Z., Li, X., Chen, C., & Chen, H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.09.148 · Cited by 309
Liang, P., Zhang, C., Duan, X., Sun, H., Liu, S., Tade, M. O., & Wang, S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03035 · Cited by 288
Rehman, F., Sayed, M., Khan, J. A., Shah, N. S., Khan, H. M., & Dionysiou, D. D. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.06.012 · Cited by 245
Zhu, C., Zhu, F., Dionysiou, D. D., Zhou, D., Fang, G., & Gao, J. (2018) · Water Research · doi:10.1016/j.watres.2018.03.069 · Cited by 235
Tian, W., Zhang, H., Qian, Z., Ouyang, T., Sun, H., Qin, J., Tadé, M. O., & Wang, S. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.11.056 · Cited by 229
Guan, R., Yuan, X., Wu, Z., Jiang, L., Li, Y., & Zeng, G. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.153 · Cited by 227
Oh, W.-D., Lua, S.-K., Dong, Z., & Lim, T.-T. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.10.042 · Cited by 202
Wei, M., Gao, L., Li, J., Fang, J., Cai, W., Li, X., & Xu, A. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.05.031 · Cited by 195
Zamora, P. L., & Villamena, F. A. (2012) · The Journal of Physical Chemistry A · doi:10.1021/jp3039169 · Cited by 187
Wang, Y., Sun, H., Ang, H. M., Tadé, M. O., & Wang, S. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.02.013 · Cited by 177
Sun, H., Peng, X., Zhang, S., Liu, S., Xiong, Y., Tian, S., & Fang, J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.102 · Cited by 156
Guo, Y., Zeng, Z., Liu, Y., Huang, Z., Cui, Y. R., & Yang, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09814f · Cited by 144
Magnetic Fe–Co crystal doped hierarchical porous carbon fibers for removal of organic pollutants
Zhu, Z., Ji, C., Zhong, L., Liu, S., Cui, F., Sun, H., & Wang, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03990e · Cited by 132
Ozonation, photocatalysis and photocatalytic ozonation of diuron. Intermediates identification
Solís, R. R., Rivas, J., Martínez-Piernas, A. B., & Agüera, A. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.02.005 · Cited by 85
Tian, W., Zhang, H., Sun, H., Tadé, M. O., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.139 · Cited by 74
Yang, Z., Huang, Y., Ji, D., Xiong, G., Luo, H., & Wan, Y. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.05.127 · Cited by 22
Cited by
Kohantorabi, M., Moussavi, G., & Giannakis, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127957 · Cited by 975
Nanocatalysts and other nanomaterials for water remediation from organic pollutants
Lu, F., & Astruc, D. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213180 · Cited by 682
Activation of persulfates by carbonaceous materials: A review
Huang, W., Xiao, S., Zhong, H., Yan, M., & Yang, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129297 · Cited by 558
Magnetic biochar for environmental remediation: A review
Yi, Y., Huang, Z., Lu, B., Xian, J., Tsang, E. P., Cheng, W., Fang, J., & Fang, Z. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122468 · Cited by 530
Zhao, C., Shao, B., Yan, M., Liu, Z., Liang, Q., He, Q., Wu, T., Liu, Y., Pan, Y., Huang, J., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128829 · Cited by 518
Metadata
- Authors
- Fu, H., Ma, S., Zhao, P., Xu, S., & Zhan, S.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 360
- Pages
- 157-170
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2902109725
- Cited by
- 486
- References
- 48
- FWCI
- 14.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.