The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Electrochemical removal of methylene blue using alginate-modified graphene adsorbents
Abstract
This study aims to propose combined techniques for electrodegradation and adsorption using graphene oxide/alginate (GO/Alg) as an alternative method to enhance the removal of dyes from wastewater. Therefore, GO/Alg was newly synthesized and designed with an electrochemical cell. Methylene blue (MB), as a cationic dye commonly used by textile industries, was used as a model dye for evaluating the developed system. All the related experimental parameters were well optimized for the optimum efficiency of the proposed system. The composition of GO/Alg, concentration of CaCl2, and pH solution have been investigated. The GO/Alg was characterized by XRD (X-Ray Diffraction), FTIR (Fourier Transform Infra Red), a SEM (Scanning Electron Microscope), TEM (Transmission Electron Microscope), and an SAA (Surface Area Analyzer). The characterizations presented that GO was well exfoliated in the alginate matrix. The optimum condition for removing MB dye was found to be pH 3.0, for 30 min at a voltage of 4.5 V with the first order rate constant (k) 7.45 × 10−2 min−1. In addition, the combined technique showed good removal efficiency in the simulated real textile sample with a percentage of ≥90%. This work proves that the electro-adsorption technique is more efficient than adsorption as a single technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of methylene blue by adsorption onto activated carbon developed from Ficus carica bast
Pathania, D., Sharma, S., & Singh, P. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.04.021 · Cited by 1,028
Mohammadi, N., Khani, H., Gupta, V. K., Amereh, E., & Agarwal, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.06.067 · Cited by 818
Regeneration of adsorbents and recovery of heavy metals: a review
Lata, S., Singh, P. K., & Samadder, S. R. (2015) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-014-0714-9 · Cited by 491
Cited by
Li, Z., Hanafy, H., Zhang, L., Sellaoui, L., Schadeck Netto, M., Oliveira, M. L. S., Seliem, M. K., Luiz Dotto, G., Bonilla-Petriciolet, A., & Li, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124263 · Cited by 513
Water treatment technologies in removing heavy metal ions from wastewater: A review
Saleh, T. A., Mustaqeem, M., & Khaled, M. (2022) · Environmental Nanotechnology, Monitoring & Management · doi:10.1016/j.enmm.2021.100617 · Cited by 491
Self-citationEltaweil, A. S., Elgarhy, G. S., El-Subruiti, G. M., & Omer, A. M. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.03.122 · Cited by 382
Zhang, Y., Zheng, Y., Yang, Y., Huang, J., Zimmerman, A. R., Chen, H., Hu, X., & Gao, B. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125432 · Cited by 187
Metadata
- Authors
- Fadillah, G., Saleh, T. A., Wahyuningsih, S., Ninda Karlina Putri, E., & Febrianastuti, S.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 378
- Pages
- 122140
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2953659108
- Cited by
- 169
- References
- 3
- FWCI
- 8.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrochemical removal of methylene blue using alginate-modified graphene adsorbents. https://app.cochat.ai/papers/10.1016/j.cej.2019.122140
- The paper
- Fadillah, G., Saleh, T. A., Wahyuningsih, S., Ninda Karlina Putri, E., & Febrianastuti, S. (2019). Electrochemical removal of methylene blue using alginate-modified graphene adsorbents. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.122140
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.