New insights into CO2 sorption on biochar/Fe oxyhydroxide composites: Kinetics, mechanisms, and in situ characterization
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Despite its importance, chemical process has been often overlooked in CO2 sorption on carbon based oxyhydroxide composites. In this study, pristine and ball-milled biochar/Fe oxyhydroxide composites were fabricated for CO2 sorption at 25 °C. The composites, particularly the ones with high Fe content, were effective sorbents for CO2 with the capacities of up to 160 mg g−1. The primary mechanism of CO2 sorption on biochar composites with low Fe content was physical adsorption. When the Fe content increased, biochar/Fe oxyhydroxide composites showed enhanced CO2 sorption capacities, but the sorption kinetics became slower. This is because the governing CO2 sorption mechanism was shifted from physical adsorption to chemical reaction between Fe oxyhydroxides and CO2. The formed (oxy)hydroxycarbonate could be decomposed at a temperature between 50 and 125 °C. Furthermore, ball milling could speed up CO2 mineralization rate on the composites, especially for those with high Fe content, to favor the relative significance of chemical sorption. Both physical and chemical CO2 sorption mechanisms were verified by different characterization methods including in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. Findings of this study not only demonstrate the importance of chemical sorption, but also provide new insights on CO2 capture by low-cost and environmentally benign biochar/Fe oxyhydroxide composites. Besides, the low regeneration temperature of chemically-sorbed CO2 gives biochar/Fe oxyhydroxide composite a competitive edge over other CO2 sorbents, which often need a high regeneration temperature or are not regenerable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Self-citationCarbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Self-citationLiu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
Chemical transformation of CO2 during its capture by waste biomass derived biochars
Xu, X., Kan, Y., Zhao, L., & Cao, X. (2016) · Environmental Pollution · doi:10.1016/j.envpol.2016.03.013 · Cited by 220
Self-citationCarbon dioxide capture using various metal oxyhydroxide–biochar composites
Creamer, A. E., Gao, B., & Wang, S. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.037 · Cited by 161
Self-citationMechanically activated minerals as a sink for CO2
Sandvik, K. L., Kleiv, R. A., & Haug, T. A. (2011) · Advanced Powder Technology · doi:10.1016/j.apt.2010.06.004 · Cited by 27
Cited by
Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D. C. W., Gupta, J., Gao, B., Cao, X., Tang, J., & Ok, Y. S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123613 · Cited by 561
Self-citationAmusat, S. O., Kebede, T. G., Dube, S., & Nindi, M. M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.101993 · Cited by 323
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Khan, R., Shukla, S., Kumar, M., Zuorro, A., & Pandey, A. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144495 · Cited by 114
CO2 capture using biochar derived from conditioned sludge via pyrolysis
Liu, C., Fu, C., Li, T., Zhang, P., Xia, Y., Wu, Y., Lan, Q., Li, Y., Zhang, Y., & Gui, J. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.123624 · Cited by 21
Metadata
- Authors
- Xu, X., Xu, Z., Gao, B., Zhao, L., Zheng, Y., Huang, J., Tsang, D. C. W., Ok, Y. S., & Cao, X.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 384
- Pages
- 123289
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2984162213
- Cited by
- 55
- References
- 6
- FWCI
- 2.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: New insights into CO2 sorption on biochar/Fe oxyhydroxide composites: Kinetics, mechanisms, and in situ characterization. https://app.cochat.ai/papers/10.1016/j.cej.2019.123289
- The paper
- Xu, X., Xu, Z., Gao, B., Zhao, L., Zheng, Y., Huang, J., Tsang, D. C. W., Ok, Y. S., & Cao, X. (2020). New insights into CO2 sorption on biochar/Fe oxyhydroxide composites: Kinetics, mechanisms, and in situ characterization. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.123289
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.