Performance enhancement of CO2 capture adsorbents by UV treatment: The case of self-supported graphene oxide foam
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract Development of novel and more efficient materials for capturing CO2 from various sources is of high priority as to combat the climate change effects due to increasing CO2 levels in the atmosphere. In this work, a UV-irradiated graphene oxide foam (UV-GOF) was developed and studied for CO2 adsorption. The characteristics of the prepared GOF and UV-GOF adsorbents related to structure, morphology, and surface properties were obtained, while methylene blue dye adsorption was used as efficient means to evaluate their specific surface area. CO2 adsorption performance was evaluated in terms of capacity, selectivity, regenerability, kinetics, isosteric heat of sorption, and hydrophilicity. UV treatment and the associated structural and surface changes on the developed GOF were found to impact adsorption performance, and optimum conditions were extracted. Indicatively, a 30-fold higher selectivity was obtained at 100 mbar upon 5-h UV treatment with an associated 7-fold increase in CO2 capacity. UV treatment of graphene-based adsorbents can enhance performance for carbon capture that can be potentially applied at industrial scale before capture application as a facile and low-cost pretreatment technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reduction of graphene oxide via l -ascorbic acid
Zhang, J., Yang, H., Shen, G., Cheng, P., Zhang, J., & Guo, S. (2010) · Chem. Commun. · doi:10.1039/b917705a · Cited by 2,344
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Adsorption of methylene blue onto bamboo-based activated carbon: Kinetics and equilibrium studies
HAMEED, B., DIN, A., & AHMAD, A. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.07.049 · Cited by 1,513
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Development of adsorbents for CO2 capture from waste materials: a review
Olivares‐Marín, M., & Maroto‐Valer, M. M. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.45 · Cited by 142
Cited by
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Self-citationAbd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
Self-citation
Metadata
- Authors
- Varghese, A. M., Reddy, K. S. K., Singh, S., & Karanikolos, G. N.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 386
- Pages
- 124022
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2998952752
- Cited by
- 110
- References
- 6
- FWCI
- 6.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Performance enhancement of CO2 capture adsorbents by UV treatment: The case of self-supported graphene oxide foam. https://app.cochat.ai/papers/10.1016/j.cej.2020.124022
- The paper
- Varghese, A. M., Reddy, K. S. K., Singh, S., & Karanikolos, G. N. (2020). Performance enhancement of CO2 capture adsorbents by UV treatment: The case of self-supported graphene oxide foam. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.124022
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.