The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Enhancing biochar redox properties through feedstock selection, metal preloading and post-pyrolysis treatments
Open accessAbstract
There is growing evidence on the importance of the redox properties of biochar for many environmental applications. However, its variability and the difficulty in controlling its redox properties could be delaying the use of biochar in those areas that involve the exchange of electrons, like microbial fuel cells or contaminant degradation related to microbial electron shuttling. To help with these issues, we produced a wide range of biochars showing different redox capacities through a variety of strategies. These include optimizing production and processing parameters, feedstock selection, preloading biomass with redox-active metals and post-pyrolysis treatments. A modified Hummer’s method was the most efficient treatment, increasing the electron donating capacity from 0.244 mmol e−/gbiochar to 0.590 mmol e−/gbiochar and the electron accepting capacity from 0.169 mmol e−/gbiochar to 0.645 mmol e−/gbiochar. The characterization of the phases responsible for the redox properties, mainly surface functional groups, radicals and redox-active metals, allowed us to better understand the changes caused to biochar by the different strategies. It revealed that the most important approach to enhance redox properties is to increase the number of C–OH and C O groups in biochar, while the methods that use redox-active metals showed higher than predicted electron donating capacities. We also measured other attributes such as surface area, pH and conductivity, with a focus on their relationship with the redox properties. By selecting the appropriate production and modification methods, we were able to produce a balanced biochar with acceptable conductivity (1.34 mS/cm) and electron exchange capacity (0.418 mmol e−/gbiochar), even though these properties usually have an inverse relationship. This work opens the possibility for the production of designer biochars with tailored properties optimized for specific applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Fang, G., Liu, C., Gao, J., Dionysiou, D. D., & Zhou, D. (2015) · Environmental Science & Technology · doi:10.1021/es5061512 · Cited by 887
Fang, G., Gao, J., Liu, C., Dionysiou, D. D., Wang, Y., & Zhou, D. (2014) · Environmental Science & Technology · doi:10.1021/es4048126 · Cited by 802
Biochar and denitrification in soils: when, how much and why does biochar reduce N2O emissions?
Cayuela, M. L., Sánchez-Monedero, M. A., Roig, A., Hanley, K., Enders, A., & Lehmann, J. (2013) · Scientific Reports · doi:10.1038/srep01732 · Cited by 743
Self-citationDegradation of p-Nitrophenol on Biochars: Role of Persistent Free Radicals
Yang, J., Pan, B., Li, H., Liao, S., Zhang, D., Wu, M., & Xing, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04042 · Cited by 398
Fang, G., Zhu, C., Dionysiou, D. D., Gao, J., & Zhou, D. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.032 · Cited by 379
Qin, Y., Li, G., Gao, Y., Zhang, L., Ok, Y. S., & An, T. (2018) · Water Research · doi:10.1016/j.watres.2018.03.012 · Cited by 339
Different action of alkali/alkaline earth metal chlorides on cellulose pyrolysis
Shimada, N., Kawamoto, H., & Saka, S. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.09.005 · Cited by 229
Recent developments of post-modification of biochar for electrochemical energy storage
Cheng, B.-H., Zeng, R. J., & Jiang, H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.060 · Cited by 216
Cited by
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Kumar, M., Dutta, S., You, S., Luo, G., Zhang, S., Show, P. L., Sawarkar, A. D., Singh, L., & Tsang, D. C. W. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127143 · Cited by 474
Qiu, Y., Zhang, Q., Gao, B., Li, M., Fan, Z., Sang, W., Hao, H., & Wei, X. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.115018 · Cited by 304
Tuning oxygenated functional groups on biochar for water pollution control: A critical review
Dai, L., Lu, Q., Zhou, H., Shen, F., Liu, Z., Zhu, W., & Huang, H. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126547 · Cited by 271
Zhao, W., Yang, H., He, S., Zhao, Q., & Wei, L. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125797 · Cited by 255
Metadata
- Authors
- Chacón, F. J., Sánchez-Monedero, M. A., Lezama, L., & Cayuela, M. L.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 395
- Pages
- 125100
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3019801543
- Cited by
- 189
- References
- 10
- FWCI
- 8.66
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhancing biochar redox properties through feedstock selection, metal preloading and post-pyrolysis treatments. https://app.cochat.ai/papers/10.1016/j.cej.2020.125100
- The paper
- Chacón, F. J., Sánchez-Monedero, M. A., Lezama, L., & Cayuela, M. L. (2020). Enhancing biochar redox properties through feedstock selection, metal preloading and post-pyrolysis treatments. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.125100
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.