The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Effective adsorption of dyes on an activated carbon prepared from carboxymethyl cellulose: Experiments, characterization and advanced modelling
Abstract
An activated carbon with a high surface area and outstanding adsorption properties was prepared for dye removal from water. The new adsorbent was obtained from the chemical activation and pyrolysis of sodium carboxymethyl cellulose (CMC). This activated carbon was employed to analyze and characterize the adsorption mechanism of three dye molecules: methyl violet, allura red and congo red. Different characterization techniques and experimental adsorption isotherms quantified at different temperatures (25-45°C) were utilized to interpret the dye adsorption mechanism. A double layer adsorption model was employed to estimate the steric and energetic parameters associated with the adsorption of these dye molecules. The modelling results provided the possible adsorption orientations of these dyes on adsorbent surfaces at different operating temperatures and the number of bonded dye molecules per functional group of this adsorbent was also analyzed. Calculated adsorption energies showed that both exothermic and endothermic processes were feasible for these dyes and physical forces were involved in the adsorption mechanism. Overall, this new adsorbent showed a competitive performance for dye removal in aqueous solution and can be a potential option for industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Application of low-cost adsorbents for dye removal – A review
Gupta, V. K., & Suhas (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2008.11.017 · Cited by 3,875
A review on heavy metal ions adsorption from water by graphene oxide and its composites
Peng, W., Li, H., Liu, Y., & Song, S. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.01.064 · Cited by 821
Chen, S., Zhang, J., Zhang, C., Yue, Q., Li, Y., & Li, C. (2010) · Desalination · doi:10.1016/j.desal.2009.10.010 · Cited by 772
FTIR and Raman spectroscopy characterization of functional groups in various rank coals
He, X., Liu, X., Nie, B., & Song, D. (2017) · Fuel · doi:10.1016/j.fuel.2017.05.101 · Cited by 742
Shaheen, S. M., Niazi, N. K., Hassan, N. E. E., Bibi, I., Wang, H., Tsang, D. C. W., Ok, Y. S., Bolan, N., & Rinklebe, J. (2019) · International Materials Reviews · doi:10.1080/09506608.2018.1473096 · Cited by 527
Self-citationLi, Z., Hanafy, H., Zhang, L., Sellaoui, L., Schadeck Netto, M., Oliveira, M. L. S., Seliem, M. K., Luiz Dotto, G., Bonilla-Petriciolet, A., & Li, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124263 · Cited by 513
Self-citationAdsorption of heavy metals on functionalized-mesoporous silica: A review
Da'na, E. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.03.050 · Cited by 476
Zhu, H.-Y., Fu, Y.-Q., Jiang, R., Jiang, J.-H., Xiao, L., Zeng, G.-M., Zhao, S.-L., & Wang, Y. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.08.020 · Cited by 439
Sherlala, A. I. A., Raman, A. A. A., Bello, M. M., & Asghar, A. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.11.093 · Cited by 420
Qu, W.-H., Xu, Y.-Y., Lu, A.-H., Zhang, X.-Q., & Li, W.-C. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.04.005 · Cited by 382
Dye Adsorption on Layered Graphite Oxide
Bradder, P., Ling, S. K., Wang, S., & Liu, S. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je101049g · Cited by 381
Equilibrium and kinetic studies of methyl violet sorption by agricultural waste
Hameed, B. H. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.10.010 · Cited by 354
α-Chitin Nanocrystals Prepared from Shrimp Shells and Their Specific Surface Area Measurement
Goodrich, J. D., & Winter, W. T. (2007) · Biomacromolecules · doi:10.1021/bm0603589 · Cited by 345
Saucier, C., Adebayo, M. A., Lima, E. C., Cataluña, R., Thue, P. S., Prola, L. D. T., Puchana-Rosero, M. J., Machado, F. M., Pavan, F. A., & Dotto, G. L. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.02.026 · Cited by 345
Adsorption of a hazardous dye, erythrosine, over hen feathers
Gupta, V. K., Mittal, A., Kurup, L., & Mittal, J. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.08.032 · Cited by 331
Zama, E. F., Zhu, Y.-G., Reid, B. J., & Sun, G.-X. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.125 · Cited by 323
Adsorption isotherms and thermochemical data of FD&C Red n° 40 binding by Chitosan
Piccin, J. S., Dotto, G. L., & Pinto, L. A. A. (2011) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322011000200014 · Cited by 311
Yu, M., Li, J., & Wang, L. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.121 · Cited by 272
Using FTIR to predict saccharification from enzymatic hydrolysis of alkali‐pretreated biomasses
Sills, D. L., & Gossett, J. M. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.23314 · Cited by 222
Jiang, S., Huang, L., Nguyen, T. A. H., Ok, Y. S., Rudolph, V., Yang, H., & Zhang, D. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2015.06.079 · Cited by 219
Pang, X., Sellaoui, L., Franco, D., Dotto, G. L., Georgin, J., Bajahzar, A., Belmabrouk, H., Ben Lamine, A., Bonilla-Petriciolet, A., & Li, Z. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122101 · Cited by 202
Self-citationLi, Z., Sellaoui, L., Franco, D., Netto, M. S., Georgin, J., Dotto, G. L., Bajahzar, A., Belmabrouk, H., Bonilla-Petriciolet, A., & Li, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124467 · Cited by 187
Self-citationRibas, M. C., Adebayo, M. A., Prola, L. D. T., Lima, E. C., Cataluña, R., Feris, L. A., Puchana-Rosero, M. J., Machado, F. M., Pavan, F. A., & Calvete, T. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.054 · Cited by 179
Sorption of methylene blue by carboxymethyl cellulose and reuse process in a secondary sorption
Yan, H., Zhang, W., Kan, X., Dong, L., Jiang, Z., Li, H., Yang, H., & Cheng, R. (2011) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2011.02.045 · Cited by 174
Streit, A. F. M., Côrtes, L. N., Druzian, S. P., Godinho, M., Collazzo, G. C., Perondi, D., & Dotto, G. L. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.01.027 · Cited by 168
A useful organofunctionalized layered silicate for textile dye removal
Royer, B., Cardoso, N. F., Lima, E. C., Macedo, T. R., & Airoldi, C. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.05.019 · Cited by 159
Mittal, A., Gajbe, V., & Mittal, J. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.04.117 · Cited by 150
Kinetic and Equilibrium Studies on the Adsorption of Crystal Violet Dye using Kaolin as an Adsorbent
Nandi, B. K., Goswami, A., Das, A. K., et al. (2008) · Separation Science and Technology · doi:10.1080/01496390701885331 · Cited by 141
Li, Z., Sellaoui, L., Dotto, G. L., Bonilla‐Petriciolet, A., & Lamine, A. B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.035 · Cited by 141
Self-citationAdebayo, M. A., Prola, L. D. T., Lima, E. C., Puchana-Rosero, M. J., Cataluña, R., Saucier, C., Umpierres, C. S., Vaghetti, J. C. P., da Silva, L. G., & Ruggiero, R. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.01.005 · Cited by 129
Dhaouadi, F., Sellaoui, L., Badawi, M., Reynel‐Ávila, H. E., Mendoza‐Castillo, D. I., Jaime-Leal, J. E., Bonilla‐Petriciolet, A., & Lamine, A. B. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114168 · Cited by 120
Self-citationDil, E. A., Ghaedi, M., Asfaram, A., & Bazrafshan, A. A. (2018) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2018.02.040 · Cited by 118
Foroutan, R., Mohammadi, R., & Ramavandi, B. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-05282-z · Cited by 113
de Melo, J. C. P., Silva-Filho, E. C., Santana, S. A. A., & Airoldi, C. (2009) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2009.06.006 · Cited by 112
Pang, X., Sellaoui, L., Franco, D. S. P., Netto, M. S., Georgin, J., Dotto, G. L., Shayeb, M. A., Belmabrouk, H., Bonilla‐Petriciolet, A., & Li, Z. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123617 · Cited by 107
Self-citationBello, O. S., & Ahmad, M. A. (2012) · Separation Science and Technology · doi:10.1080/01496395.2011.630335 · Cited by 101
Yu, M., Han, Y., Li, J., & Wang, L. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.012 · Cited by 101
Preparation of bulk sodium carboxymethyl cellulose aerogels with tunable morphology
Lin, R., Li, A., Lu, L., & Cao, Y. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.075 · Cited by 100
CMC-coated Fe 3 O 4 nanoparticles as new MRI probes for hepatocellular carcinoma
Sitthichai, S., Pilapong, C., Thongtem, T., & Thongtem, S. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.08.140 · Cited by 89
Sellaoui, L., Ali, J., Badawi, M., Bonilla‐Petriciolet, A., & Chen, Z. (2020) · Applied Clay Science · doi:10.1016/j.clay.2020.105828 · Cited by 89
Self-citationZhao, J., Lu, Z., He, X. C., Zhang, X., Li, Q., Xia, T. D., Zhang, W., & Lu, C. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01175 · Cited by 86
Self-citationGüler, Ü. A., Erşan, M., Tuncel, E., & Düğenci, F. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2015.11.006 · Cited by 81
Effect of functionalization on the adsorption capacity of cellulose for the removal of methyl violet
Musyoka, S. M., Mittal, H., Mishra, S. B., & Ngila, J. C. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.01.051 · Cited by 79
Vaughn, S. F., Kenar, J. A., Eller, F. J., Moser, B. R., Jackson, M. A., & Peterson, S. C. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.026 · Cited by 70
Li, S., Song, Y.-L., Yang, H., An, Q., Xiao, Z., & Zhai, S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.08.186 · Cited by 63
Li, Z., Dotto, G. L., Bajahzar, A., Sellaoui, L., Belmabrouk, H., Lamine, A. B., & Bonilla‐Petriciolet, A. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.134 · Cited by 61
Self-citationLi, Z., Sellaoui, L., Gueddida∥, S., Dotto, G. L., Lamine, A. B., Bonilla‐Petriciolet, A., & Badawi, M. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114348 · Cited by 60
Self-citationSaha, T., Bishwas, R. K., Karmaker, S., & Islam, Z. (2020) · ACS Omega · doi:10.1021/acsomega.0c01493 · Cited by 53
Bello, O. S., Auta, M., & Ayodele, O. B. (2012) · Chemistry and Ecology · doi:10.1080/02757540.2012.686606 · Cited by 49
Xu, M., Ao, Y., Wang, S., Peng, J., Li, J., & Zhai, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.04.018 · Cited by 46
Drumm, F. C., Franco, D. S. P., Georgin, J., Grassi, P., Jahn, S. L., & Dotto, G. L. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10521-9 · Cited by 39
Wu, Q., Li, W., Wu, Y., Zong, G., & Liu, S. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.07.047 · Cited by 37
Yazidi, A., Sellaoui, L., Badawi, M., Lima, E. C., Bonilla‐Petriciolet, A., Thue, P. S., Cimirro, N. F. G. M., & Lamine, A. B. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.104542 · Cited by 28
Self-citation
Cited by
Recent Advances in Adsorption Kinetic Models: Their Application to Dye Types
Benjelloun, M., Miyah, Y., Akdemir Evrendilek, G., Zerrouq, F., & Lairini, S. (2021) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2021.103031 · Cited by 428
Xue, H., Wang, X., Xu, Q., Dhaouadi, F., Sellaoui, L., Seliem, M. K., Ben Lamine, A., Belmabrouk, H., Bajahzar, A., Bonilla-Petriciolet, A., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132801 · Cited by 377
Self-citationBouchelkia, N., Tahraoui, H., Amrane, A., Belkacemi, H., Bollinger, J.-C., Bouzaza, A., Zoukel, A., Zhang, J., & Mouni, L. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.12.028 · Cited by 124
Alvez-Tovar, B., Scalize, P. S., Angiolillo-Rodríguez, G., Albuquerque, A., Ebang, M. N., & de Oliveira, T. F. (2025) · Sustainability · doi:10.3390/su17052036 · Cited by 24
Metadata
- Authors
- Wang, H., Li, Z., Yahyaoui, S., Hanafy, H., Seliem, M. K., Bonilla-Petriciolet, A., Luiz Dotto, G., Sellaoui, L., & Li, Q.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 417
- Pages
- 128116
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3110845903
- Cited by
- 330
- References
- 53
- FWCI
- 14.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.