The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A self-reinforced cementitious composite for building-scale 3D printing
Abstract
Abstract A design scheme for self-reinforced cementitious composites to be used for building-scale 3D printing processes is introduced. The design is based on that of engineered cementitious composites, which include dispersed short polymer fibers to generate robust tensile strain-hardening. The mechanical property profile of these printable ECC materials is meant to eliminate the need for steel reinforcement in printed structures, providing more freedom and efficiency for building-scale 3D printing processes. The fresh state rheological properties have been systematically manipulated to allow printability. Effects on fresh state workability of several compositional ingredients and processing parameters are investigated herein. To maintain consistent printing performance with a batch mixing approach, thixotropy in the fresh state is exploited to temporarily decouple hardening behavior from the processing timeline. Minimal workability loss under continued shear agitation is achieved. Mechanical properties of the printable materials are characterized and the printability of the materials is demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Cited by
Tang, Q., Ma, Z., Wu, H., & Wang, W. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103807 · Cited by 549
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Souza, M. T., Ferreira, I. M., Guzi de Moraes, E., Senff, L., & Novaes de Oliveira, A. P. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101833 · Cited by 268
Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103268 · Cited by 257
Metadata
- Authors
- Soltan, D. G., & Li, V. C.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 90
- Pages
- 1-13
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2789280231
- Cited by
- 330
- References
- 2
- FWCI
- 23.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
