The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC?
Open accessAbstract
Abstract The use of steel fiber is essential to secure high strength and ductility in producing ultra-high performance concrete (UHPC). In this study, the interfacial bond properties between embedded steel fibers with different shapes (straight, hooked, and corrugated fibers) and UHPC matrices proportioned with either 15% or 20% silica fume, by mass of binder, under different curing times were investigated. Flexural properties of UHPC reinforced with 2% different shaped fibers were also evaluated. Test results showed that corrugated and hooked fibers significantly improved the bond properties by three to seven times when compared to those with straight fibers. The flexural strength of UHPC with corrugated and hooked fibers were enhanced by 8%–28% and 17%–50%, respectively. Microstructural results from MIP, BSEM, and TG confirmed the change in bond properties. The bond strength of straight fibers exponentially increased with the decrease of calcium hydroxide content. Based on the composite theory, the flexural strengths of UHPC made with different shaped fibers can be efficiently predicted using the fiber-matrix bond strength, the flexural strength of the UHPC matrix (non-fibrous matrix), and the parameters of fibers. The ratios of predicted to measured flexural strengths ranged between 0.8 and 1.1, in which straight fibers showed a larger discreteness due to higher sensitivity of flexural strength associated with the orientation of fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete
Scrivener, K. L., Crumbie, A. K., & Laugesen, P. (2004) · Interface Science · doi:10.1023/b:ints.0000042339.92990.4c · Cited by 1,460
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationEffects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Self-citationFiber-reinforced concrete: an overview after 30 years of development
Zollo, R. F. (1997) · Cement and Concrete Composites · doi:10.1016/s0958-9465(96)00046-7 · Cited by 802
Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete
Park, S. H., Kim, D. J., Ryu, G. S., & Koh, K. T. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.09.009 · Cited by 751
Wu, Z., Shi, C., He, W., & Wang, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.010 · Cited by 492
Self-citation(1996) · Choice Reviews Online · doi:10.5860/choice.33-4528 · Cited by 458
Reactive Powder Concretes With High Ductility and 200 - 800 Mpa Compressive Strength
(1994) · "SP-144: Concrete Technology: Past, Present, and Future" · doi:10.14359/4536 · Cited by 436
Wu, Z., Shi, C., & Khayat, K. H. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.05.005 · Cited by 431
Self-citationKang, S.-T., Lee, Y., Park, Y.-D., & Kim, J.-K. (2010) · Composite Structures · doi:10.1016/j.compstruct.2009.06.012 · Cited by 418
Kim, D. J., Park, S. H., Ryu, G. S., & Koh, K. T. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.051 · Cited by 413
Experimental study of the interfacial transition zone (ITZ) of model rock-filled concrete (RFC)
Xie, Y., Corr, D. J., Jin, F., Zhou, H., & Shah, S. P. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.002 · Cited by 196
Predicting the pullout response of inclined hooked steel fibers
Laranjeira, F., Molins, C., & Aguado, A. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.05.005 · Cited by 176
Wille, K., & Naaman, A. E. (2013) · ACI Materials Journal · doi:10.14359/51685792 · Cited by 141
Han, B., Dong, S., Ou, J., Zhang, C., Wang, Y., Yu, X., & Ding, S. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.004 · Cited by 96
高強度真鍮メッキ直鋼繊維の引抜性状に対する超高性能コンクリートの影響 | 文献情報 | J-GLOBAL 科学技術総合リンクセンター
Kay, W., & Antoine, E. N. (2013) · ACI Materials Journal · Cited by 59
Analysis of steel fibre pull-out from a cement matrix using video photography
Pompo, A., Stupak, P. R., Nicolais, L., et al. (1996) · Cement and Concrete Composites · doi:10.1016/0958-9465(95)00034-8 · Cited by 43
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Self-citationWu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citationLiu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Self-citationWu, F., Zeng, Y., Li, B., & Lyu, X. (2021) · Materials · doi:10.3390/ma14216354 · Cited by 15
Metadata
- Authors
- Wu, Z., Khayat, K. H., & Shi, C.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 90
- Pages
- 193-201
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2794914433
- Cited by
- 318
- References
- 17
- FWCI
- 16.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.