The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Interpretable Ensemble-Machine-Learning models for predicting creep behavior of concrete
Open accessAbstract
This study aims to provide an efficient and accurate machine learning (ML) approach for predicting the creep behavior of concrete. Three ensemble machine learning (EML) models are selected in this study: Random Forest (RF), Extreme Gradient Boosting Machine (XGBoost) and Light Gradient Boosting Machine (LGBM). Firstly, the creep data in Northwestern University (NU) database is preprocessed by a prebuilt XGBoost model and then split into a training set and a testing set. Then, by Bayesian Optimization and 5-fold cross validation, the 3 EML models are tuned to achieve high accuracy (R2 = 0.953, 0.947 and 0.946 for LGBM, XGBoost and RF, respectively). In the testing set, the EML models show significantly higher accuracy than the equation proposed by the fib Model Code 2010 (R2 = 0.377). Finally, the SHapley Additive exPlanations (SHAP), based on the cooperative game theories, are calculated to interpretate the predictions of the EML model. Five most influential parameters for concrete creep compliance are identified by the SHAP values of EML models as follows: time since loading, compressive strength, age when loads are applied, relative humidity during the test and temperature during the test. The patterns captured by the three EML models are consistent with theoretical understanding of factors that influence concrete creep, which proves that the proposed EML models show reasonable predictions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jalal, M., Grasley, Z. C., Gurganus, C. F., & Bullard, J. W. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119478 · Cited by 49
RetractedBreiman, L. (2001) · Machine Learning · doi:10.1023/a:1010933404324 · Cited by 133,538
Scikit-learn: Machine Learning in Python
Pedregosa, F., Varoquaux, G., Gramfort, A., Michel, V., Thirion, B., Grisel, O., Blondel, M., Müller, A., Nothman, J., Louppe, G., et al. (2012) · arXiv · doi:10.48550/arxiv.1201.0490 · Cited by 71,016
"Why Should I Trust You?": Explaining the Predictions of Any Classifier
Ribeiro, M. T., Singh, S., & Guestrin, C. (2016) · Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining · doi:10.1145/2939672.2939778 · Cited by 17,555
Statistical Analysis With Missing Data
Lahiff, M., Little, R. J. A., & Rubin, D. B. (1989) · Journal of the American Statistical Association · doi:10.2307/2289883 · Cited by 17,265
Breiman, L. (1996) · Machine Learning · doi:10.1007/bf00058655 · Cited by 16,325
mice: Multivariate Imputation by Chained Equations in R
Buuren, S. V., & Groothuis-Oudshoorn, K. (2011) · Journal of Statistical Software · doi:10.18637/jss.v045.i03 · Cited by 13,870
Gaussian Processes for Machine Learning
Rasmussen, C. E., & Williams, C. K. I. (2005) · doi:10.7551/mitpress/3206.001.0001 · Cited by 11,705
A Study of Cross-Validation and Bootstrap for Accuracy Estimation and Model Selection
Kohavi, R. (1995) · Zenodo · doi:10.5281/zenodo.19712698 · Cited by 10,909
LightGBM: A Highly Efficient Gradient Boosting Decision Tree
(2017) · HAL · Cited by 10,512
Efficient Global Optimization of Expensive Black-Box Functions
Jones, D. R., Schonlau, M., & Welch, W. J. (1998) · Journal of Global Optimization · doi:10.1023/a:1008306431147 · Cited by 8,070
XGBoost: A Scalable Tree Boosting System
Chen, T., & Guestrin, C. (2016) · arXiv · doi:10.48550/arxiv.1603.02754 · Cited by 7,104
(2010) · University of Twente Research Information · Cited by 6,037
The Levenberg-Marquardt algorithm: Implementation and theory
Moré, J. J. (1978) · Lecture Notes in Mathematics · doi:10.1007/bfb0067700 · Cited by 5,773
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Statistical Analysis With Missing Data
Ghosh, S. (1988) · Technometrics · doi:10.1080/00401706.1988.10488446 · Cited by 4,576
fib Model Code for Concrete Structures 2010
fib (2013) · Wiley eBooks · doi:10.1002/9783433604090 · Cited by 2,751
Brochu, E., Cora, V. M., & de Freitas, N. (2010) · arXiv (Cornell University) · doi:10.48550/arxiv.1012.2599 · Cited by 2,011
Modeling of strength of high-performance concrete using artificial neural networks
Yeh, I.-C. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00165-3 · Cited by 1,447
Consistent Individualized Feature Attribution for Tree Ensembles
Lundberg, S. M., Erion, G. G., & Lee, S.-I. (2018) · arXiv · doi:10.48550/arxiv.1802.03888 · Cited by 1,430
On the interpretation of weight vectors of linear models in multivariate neuroimaging
Haufe, S., Meinecke, F., Görgen, K., Dähne, S., Haynes, J.-D., Blankertz, B., & Bießmann, F. (2014) · NeuroImage · doi:10.1016/j.neuroimage.2013.10.067 · Cited by 1,389
Multiple Imputation and its Application
Carpenter, J. R., & Kenward, M. G. (2013) · doi:10.1002/9781119942283 · Cited by 913
Machine learning prediction of mechanical properties of concrete: Critical review
Ben Chaabene, W., Flah, M., & Nehdi, M. L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119889 · Cited by 779
Asteris, P. G., Skentou, A. D., Bardhan, A., Samui, P., & Pilakoutas, K. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106449 · Cited by 694
Permutation Tests for Studying Classifier Performance
Ojala, M., & Garriga, G. C. (2009) · 2009 Ninth IEEE International Conference on Data Mining · doi:10.1109/icdm.2009.108 · Cited by 555
Efficient machine learning models for prediction of concrete strengths
Nguyen, H., Vu, T., Vo, T. P., & Thai, H.-T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120950 · Cited by 524
Kang, M.-C., Yoo, D.-Y., & Gupta, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121117 · Cited by 411
Duan, J., Asteris, P. G., Nguyen, H., Bui, X.-N., & Moayedi, H. (2021) · Engineering with Computers · doi:10.1007/s00366-020-01003-0 · Cited by 357
Effect of Fly Ash on the Durability Properties of High Strength Concrete
Nath, P., & Sarker, P. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.07.144 · Cited by 355
Permutation Tests for Studying Classifier Performance
Ojala, M., & Garriga, G. C. (2010) · Journal of Machine Learning Research · doi:10.5555/1756006.1859913 · Cited by 322
Prediction of surface chloride concentration of marine concrete using ensemble machine learning
Cai, R., Han, T., Liao, W., Huang, J., Li, D., Kumar, A., & Ma, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106164 · Cited by 284
Nguyen, K. T., Nguyen, Q. D., Le, T. A., Shin, J., & Lee, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118581 · Cited by 272
Self-compacting concrete strength prediction using surrogate models
Asteris, P. G., & Kolovos, K. G. (2019) · Neural Computing and Applications · doi:10.1007/s00521-017-3007-7 · Cited by 265
Mechanical properties of green structural concrete with ultrahigh-volume fly ash
Yu, J., Lu, C., Leung, C. K. Y., & Li, G. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.188 · Cited by 245
Han, T., Siddique, A., Khayat, K., Huang, J., & Kumar, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118271 · Cited by 236
DeRousseau, M. A., Laftchiev, E., Kasprzyk, J. R., Rajagopalan, B., & Srubar, W. V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.08.042 · Cited by 206
Solhmirzaei, R., Salehi, H., Kodur, V., & Naser, M. Z. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.111221 · Cited by 204
Compressive strength prediction of high-performance concrete using gradient tree boosting machine
Kaloop, M. R., Kumar, D., Samui, P., Hu, J. W., & Kim, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120198 · Cited by 203
Nguyen-Sy, T., Wakim, J., To, Q.-D., Vu, M.-N., Nguyen, T.-D., & Nguyen, T.-T. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119757 · Cited by 191
Su, M., Zhong, Q., Peng, H., & Li, S. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121456 · Cited by 191
Machine learning to predict properties of fresh and hardened alkali-activated concrete
Gomaa, E., Han, T., ElGawady, M., Huang, J., & Kumar, A. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103863 · Cited by 190
Marani, A., Jamali, A., & Nehdi, M. L. (2020) · Materials · doi:10.3390/ma13214757 · Cited by 178
Shi, M., Wang, Q., & Zhou, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.134 · Cited by 165
Artificial neural network for predicting drying shrinkage of concrete
Bal, L., & Buyle-Bodin, F. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.08.043 · Cited by 158
Pervasiveness of Excessive Segmental Bridge Deflections: Wake-Up Call for Creep
Bažant, Z. P., Hubler, M. H., & Yu, Q. (2011) · ACI Structural Journal · doi:10.14359/51683375 · Cited by 153
Rashad, A. M. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.01.031 · Cited by 140
Transport properties of high volume fly ash or slag concrete exposed to high temperature
Karahan, O. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.051 · Cited by 115
Young's modulus and creep of calcium-silicate-hydrate compacts measured by microindentation
Hu, Z., Wyrzykowski, M., Griffa, M., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106104 · Cited by 110
Wan, Z., Xu, Y., & Šavija, B. (2021) · Materials · doi:10.3390/ma14040713 · Cited by 105
Self-citationLavergne, F., Sab, K., Sanahuja, J., Bornert, M., & Toulemonde, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.01.003 · Cited by 76
Olalusi, O. B., & Spyridis, P. (2020) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2020.102832 · Cited by 45
Gan, Y., Rodríguez, C. R., Zhang, H., Schlangen, E., van Breugel, K., & Šavija, B. (2021) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12659 · Cited by 44
Self-citationCreep Behavior of High-Strength Concrete Subjected to Elevated Temperatures
Yoon, M., Kim, G.-Y., Kim, Y., et al. (2017) · Materials · doi:10.3390/ma10070781 · Cited by 23
Description of Concrete Creep under Time-Varying Stress Using Parallel Creep Curve
Park, Y.-S., Lee, Y., Lee, Y.-H., et al. (2016) · Advances in Materials Science and Engineering · doi:10.1155/2016/9370514 · Cited by 15
Cited by
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Baker, S., & Xiang, W. (2023) · arXiv · doi:10.48550/arxiv.2312.01555 · Cited by 12
Metadata
- Authors
- Liang, M., Chang, Z., Wan, Z., Gan, Y., Schlangen, E., & Šavija, B.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2022-01
- Volume
- 125
- Pages
- 104295
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3207942183
- Cited by
- 277
- References
- 55
- FWCI
- 22.65
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.