The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays
Open accessAbstract
The present paper introduces a new rapid, relevant and reliable (R 3 ) test to predict the pozzolanic activity of calcined clays with kaolinite contents ranging from 0 to 95%. The test is based on the correlation between the chemical reactivity of calcined clays in a simplified system and the compressive strength of blends in standard mortar. The simplified system consists of calcined clay portlandite and limestone pastes with sulfate and alkali levels adjusted to reproduce the reaction environment of hydrating blended cements. The pastes were hydrated for 6 days at 20 °C or for 1 day at 40 °C. The chemical reactivity of the calcined clay can be obtained first by measurement of the heat release during reaction using isothermal calorimetry and second by bound water determination in a heating step between 110 °C and 400 °C. Very good correlations were found between the mortar compressive strength and both measures of chemical reactivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cement substitution by a combination of metakaolin and limestone
Antoni, M., Rossen, J., Martirena, F., & Scrivener, K. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.09.006 · Cited by 1,419
Self-citationFernandez, R., Martirena, F., & Scrivener, K. L. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.013 · Cited by 1,180
Self-citationLothenbach, B., Matschei, T., Möschner, G., & Glasser, F. P. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.017 · Cited by 1,038
Lothenbach, B., Winnefeld, F., Alder, C., Wieland, E., & Lunk, P. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.11.016 · Cited by 811
Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)
Gallucci, E., Zhang, X., & Scrivener, K. L. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.008 · Cited by 624
Self-citationAlujas, A., Fernández, R., Quintana, R., Scrivener, K. L., & Martirena, F. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.01.028 · Cited by 539
Self-citationComparison of test methods to assess pozzolanic activity
Donatello, S., Tyrer, M., & Cheeseman, C. R. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.008 · Cited by 525
He, C., Osbaeck, B., & Makovicky, E. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00165-4 · Cited by 503
Snellings, R., Salze, A., & Scrivener, K. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.011 · Cited by 286
Self-citationEffect of temperature on the hydration of Portland cement blended with siliceous fly ash
Deschner, F., Lothenbach, B., Winnefeld, F., & Neubauer, J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.07.006 · Cited by 283
Cited by
Calcined clay limestone cements (LC3)
Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.017 · Cited by 1,763
Self-citationSupplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
Self-citationReactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Self-citationAvet, F., & Scrivener, K. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.016 · Cited by 864
Self-citationDhandapani, Y., Sakthivel, T., Santhanam, M., Gettu, R., & Pillai, R. G. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.005 · Cited by 635
Advances in alkali-activation of clay minerals
Khalifa, A. Z., Cizer, Ö., Pontikes, Y., Heath, A., Patureau, P., Bernal, S. A., & Marsh, A. T. M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106050 · Cited by 436
Pillai, R. G., Gettu, R., Santhanam, M., Rengaraju, S., Dhandapani, Y., Rathnarajan, S., & Basavaraj, A. S. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.019 · Cited by 360
Impacting factors and properties of limestone calcined clay cements (LC3)
Scrivener, K., Avet, F., Maraghechi, H., Zunino, F., Ston, J., Hanpongpun, W., & Favier, A. (2019) · Green Materials · doi:10.1680/jgrma.18.00029 · Cited by 354
Self-citationAssessing, Understanding and Unlocking Supplementary Cementitious Materials
Snellings, R. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.12 · Cited by 348
Self-citationAssessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba
Sánchez Berriel, S., Favier, A., Rosa Domínguez, E., Sánchez Machado, I. R., Heierli, U., Scrivener, K., Martirena Hernández, F., & Habert, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.125 · Cited by 335
Self-citationTowards ternary binders involving limestone additions — A review
Dhandapani, Y., Santhanam, M., Kaladharan, G., & Ramanathan, S. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106396 · Cited by 335
Sustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL
Hanein, T., Thienel, K.-C., Zunino, F., Marsh, A. T. M., Maier, M., Wang, B., Canut, M., Juenger, M. C. G., Ben Haha, M., Avet, F., et al. (2022) · Materials and Structures · doi:10.1617/s11527-021-01807-6 · Cited by 308
Self-citationInvestigation of C-A-S-H composition, morphology and density in Limestone Calcined Clay Cement (LC3)
Avet, F., Boehm-Courjault, E., & Scrivener, K. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.011 · Cited by 286
Self-citationEffects of sulfates on the hydration of Portland cement – A review
Andrade Neto, J. D. S., De la Torre, A. G., & Kirchheim, A. P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122428 · Cited by 278
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 274
Maraghechi, H., Avet, F., Wong, H., Kamyab, H., & Scrivener, K. (2018) · Materials and Structures · doi:10.1617/s11527-018-1255-3 · Cited by 271
Self-citationSuraneni, P., & Weiss, J. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.009 · Cited by 257
Amitani, A., & Miller, S. A. (2026) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2025.108769 · Cited by 6
Metadata
- Authors
- Avet, F., Snellings, R., Alujas Diaz, A., Ben Haha, M., & Scrivener, K.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 85
- Pages
- 1-11
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2324424583
- Cited by
- 767
- References
- 13
- FWCI
- 33.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.