The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Vision of 3D printing with concrete — Technical, economic and environmental potentials
Abstract
A vision is presented on 3D printing with concrete, considering technical, economic and environmental aspects. Although several showcases of 3D printed concrete structures are available worldwide, many challenges remain at the technical and processing level. Currently available high-performance cement-based materials cannot be directly 3D printed, because of inadequate rheological and stiffening properties. Active rheology control (ARC) and active stiffening control (ASC) will provide new ways of extending the material palette for 3D printing applications. From an economic point of view, digitally manufactured concrete (DFC) will induce changes in the stakeholders as well as in the cost structure. Although it is currently too ambitious to quantitatively present the cost structure, DFC presents many potential opportunities to increase cost-effectiveness of construction processes. The environmental impact of 3D printing with concrete has to be seen in relation to the shape complexity of the structure. Implementing structural optimization as well as functional hybridization as design strategies allows the use of material only where is structurally or functionally needed. This design optimization increases shape complexity, but also reduces material use in DFC. As a result, it is expected that for structures with the same functionality, DFC will environmentally perform better over the entire service life in comparison with conventionally produced concrete structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The future of employment: How susceptible are jobs to computerisation?
Frey, C. B., & Osborne, M. A. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.08.019 · Cited by 8,727
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
(2014) · Choice Reviews Online · doi:10.5860/choice.186403 · Cited by 910
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Digital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Bock, T. (2015) · Automation in Construction · doi:10.1016/j.autcon.2015.07.022 · Cited by 550
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Direct digital manufacturing: definition, evolution, and sustainability implications
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498
García de Soto, B., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G., & Adey, B. T. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.04.004 · Cited by 474
Self-citationParticle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
How to Make Almost Anything : The Digital Fabrication Revolution
ガーシェンフェルド, ニ. (2012) · Foreign affairs report · Cited by 418
Understanding effects of BIM on collaborative design and construction: An empirical study in China
Liu, Y., van Nederveen, S., & Hertogh, M. (2017) · International Journal of Project Management · doi:10.1016/j.ijproman.2016.06.007 · Cited by 411
Greenhouse gas emissions during the construction phase of a building: a case study in China
Hong, J., Shen, Q., Feng, Y. Q., Lau, W. S.-T., & Mao, C. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.023 · Cited by 399
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Exploratory investigation of solid freeform construction
Pegna, J. (1997) · Automation in Construction · doi:10.1016/s0926-5805(96)00166-5 · Cited by 355
Life-Cycle Assessment of Office Buildings in Europe and the United States
Junnila, S., Horvath, A., & Guggemos, A. A. (2006) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2006)12:1(10 · Cited by 342
Lloret, E., Shahab, A. R., Linus, M., Flatt, R. J., Gramazio, F., Kohler, M., & Langenberg, S. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.02.011 · Cited by 311
Suiker, A. S. J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.01.010 · Cited by 288
Environmental design guidelines for digital fabrication
Agustí-Juan, I., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.190 · Cited by 250
Self-citationAgustí-Juan, I., Müller, F., Hack, N., Wangler, T., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.002 · Cited by 246
Self-citationFACTORS AFFECTING THE PRODUCTIVITY OF BUILDING CRAFTSMEN ‐ STUDIES OF UGANDA
Alinaitwe, H. M., Mwakali, J. A., & Hansson, B. (2007) · Journal of Civil Engineering and Management · doi:10.3846/13923730.2007.9636434 · Cited by 240
Schutter, G. D., Bartos, P. J. M., Domone, P., & Gibbs, J. C. (2008) · Ghent University Academic Bibliography (Ghent University) · Cited by 233
Model interoperability in building information modelling
Steel, J., Drogemuller, R., & Toth, B. (2012) · Software & Systems Modeling · doi:10.1007/s10270-010-0178-4 · Cited by 230
The Civil Engineering Handbook
Chen, W. F., & Liew, J. Y. R. (2002) · CRC Press eBooks · doi:10.1201/9781420041217 · Cited by 202
Molecular design of comb-shaped polycarboxylate dispersants for environmentally friendly concrete
Marchon, D., Sulser, U., Eberhardt, A., & Flatt, R. J. (2013) · Soft Matter · doi:10.1039/c3sm51030a · Cited by 195
Materializing design: the implications of rapid prototyping in digital design
Sass, L., & Oxman, R. (2006) · Design Studies · doi:10.1016/j.destud.2005.11.009 · Cited by 189
Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System
Cerdas, F., Juraschek, M., Thiede, S., & Herrmann, C. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12618 · Cited by 172
Naoum, S. G. (2016) · International Journal of Productivity and Performance Management · doi:10.1108/ijppm-03-2015-0045 · Cited by 167
Mesh‐Mould: Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
Hack, N., & Lauer, W. V. (2014) · Architectural Design · doi:10.1002/ad.1753 · Cited by 155
Habert, G., Arribe, D., Dehove, T., Espinasse, L., & Roy, R. L. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.05.028 · Cited by 155
Self-citationExperimental investigation of contour crafting using ceramics materials
Khoshnevis, B., Bukkapatnam, S., Kwon, H., & Saito, J. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110365144 · Cited by 134
Design, fabrication and testing of a prototype, thin-vaulted, unreinforced concrete floor
Liew, A., López, D., Mele, T. V., & Block, P. (2017) · Engineering Structures · doi:10.1016/j.engstruct.2017.01.075 · Cited by 92
Hurd, M. K. (1973) · Medical Entomology and Zoology · Cited by 88
Workflow Integration Matrix: a framework to support the development of surgical information systems
Jalote-Parmar, A., & Badke‐Schaub, P. (2008) · Design Studies · doi:10.1016/j.destud.2008.03.002 · Cited by 46
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Wangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Nerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Self-citationMechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Self-citationLarge-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Self-citation
Metadata
- Authors
- De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 112
- Pages
- 25-36
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2886568155
- Cited by
- 1,072
- References
- 45
- FWCI
- 55.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.