The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Production of sodium silicate powder from waste glass cullet for alkali activation of alternative binders
Open accessAbstract
Abstract A simple process to produce sodium silicate powder from glass cullet has been developed. A mixture of glass powder, sodium hydroxide powder, and water was heated at temperatures of 150 to 330 °C. The effects of glass to NaOH ratio, temperature and duration, inclusion of water and fineness of NaOH were investigated. Fly ash and fly ash/GGBS blends were the precursors for alkali activated binder (AAB) mortars produced with this sodium silicate. Compressive strengths were similar to or better than those obtained with commercially available sodium silicate and sodium hydroxide solutions. FT-IR tests suggested that the reactivity of the glass derived sodium silicate powder was related to the number of non-bridging oxygen atoms in the silicate structure. Cost comparison between AAB and Portland cement concretes gave similar results for normal strength concretes (35 MPa). AAB concretes with higher strengths (50 and 70 MPa) can be cheaper than equivalent traditional concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Infrared Spectra and Characteristic Frequencies of Inorganic Ions
Miller, F. A., & Wilkins, C. H. (1952) · Analytical Chemistry · doi:10.1021/ac60068a007 · Cited by 1,691
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(00)00041-6 · Cited by 1,128
Handbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Structural study of sol–gel silicate glasses by IR and Raman spectroscopies
Aguiar, H., Serra, J., González, P., & León, B. (2009) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2009.01.010 · Cited by 686
Puertas, F., & Torres-Carrasco, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.005 · Cited by 420
Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.184 · Cited by 335
Life cycle inventories for the production of sodium silicates
Fawer, M., Concannon, M., & Rieber, W. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979498 · Cited by 334
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Metadata
- Authors
- Vinai, R., & Soutsos, M.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 116
- Pages
- 45-56
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2901433319
- Cited by
- 279
- References
- 32
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of sodium silicate powder from waste glass cullet for alkali activation of alternative binders. https://app.cochat.ai/papers/10.1016/j.cemconres.2018.11.008
- The paper
- Vinai, R., & Soutsos, M. (2019). Production of sodium silicate powder from waste glass cullet for alkali activation of alternative binders. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2018.11.008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.