The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Production of sodium silicate powder from waste glass cullet for alkali activation of alternative binders
Open accessAbstract
A simple process to produce sodium silicate powder from glass cullet has been developed. A mixture of glass powder, sodium hydroxide powder, and water was heated at temperatures of 150 to 330 °C. The effects of glass to NaOH ratio, temperature and duration, inclusion of water and fineness of NaOH were investigated. Fly ash and fly ash/GGBS blends were the precursors for alkali activated binder (AAB) mortars produced with this sodium silicate. Compressive strengths were similar to or better than those obtained with commercially available sodium silicate and sodium hydroxide solutions. FT-IR tests suggested that the reactivity of the glass derived sodium silicate powder was related to the number of non-bridging oxygen atoms in the silicate structure. Cost comparison between AAB and Portland cement concretes gave similar results for normal strength concretes (35 MPa). AAB concretes with higher strengths (50 and 70 MPa) can be cheaper than equivalent traditional concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Infrared Spectra and Characteristic Frequencies of Inorganic Ions
Miller, F. A., & Wilkins, C. H. (1952) · Analytical Chemistry · doi:10.1021/ac60068a007 · Cited by 1,691
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(00)00041-6 · Cited by 1,128
Handbook of Alkali-Activated Cements, Mortars and Concretes
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16511-7 · Cited by 688
Structural study of sol–gel silicate glasses by IR and Raman spectroscopies
Aguiar, H., Serra, J., González, P., & León, B. (2009) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2009.01.010 · Cited by 686
Puertas, F., & Torres-Carrasco, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.005 · Cited by 420
Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.184 · Cited by 335
Life cycle inventories for the production of sodium silicates
Fawer, M., Concannon, M., & Rieber, W. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979498 · Cited by 334
Recent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330
Factors influencing the compressive strength of fly ash based geopolymers
Soutsos, M. N., Boyle, A. P., Vinai, R., Hadjierakleous, A., & Barnett, S. J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.045 · Cited by 326
Self-citationWaste glass as partial mineral precursor in alkali-activated slag/fly ash system
Zhang, S., Keulen, A., Arbi, K., & Ye, G. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.012 · Cited by 283
XPS and FT-IR investigation of silicate polymers
Simonsen, M. E., Sønderby, C., Li, Z., & Søgaard, E. G. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3270-9 · Cited by 279
On the Mechanism of the Dissolution of Quartz and Silica in Aqueous Solutions
Crundwell, F. K. (2017) · ACS Omega · doi:10.1021/acsomega.7b00019 · Cited by 267
Tong, K. T., Vinai, R., & Soutsos, M. N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.025 · Cited by 261
Self-citationGuidelines for mix proportioning of fly ash/GGBS based alkali activated concretes
Rafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.036 · Cited by 258
Self-citationKinetics of amorphous silica dissolution and the paradox of the silica polymorphs
Dove, P. M., Han, N., Wallace, A. F., & De Yoreo, J. J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0803798105 · Cited by 252
Passuello, A., Rodríguez, E. D., Hirt, E., Longhi, M., Bernal, S. A., Provis, J. L., & Kirchheim, A. P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.007 · Cited by 223
Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder
Rodríguez, E. D., Bernal, S. A., Provis, J. L., Paya, J., Monzo, J. M., & Borrachero, M. V. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.025 · Cited by 214
Blengini, G. A., Busto, M., Fantoni, M., & Fino, D. (2011) · Waste Management · doi:10.1016/j.wasman.2011.10.018 · Cited by 175
Sodium silicate solutions from dissolution of glasswastes. Statistical analysis
Torres-Carrasco, M., Palomo, J. G., & Puertas, F. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.05213 · Cited by 168
Bernal, S. A., Rodríguez, E. D., de Gutiérrez, R. M., & Provis, J. L. (2015) · Materiales de Construcción · doi:10.3989/mc.2015.03114 · Cited by 136
Alkali activated slag cements using waste glass as alternative activators. Rheological behaviour
Torres‐Carrasco, M., Rodríguez-Puertas, C., Alonso, M. M., & Puertas, F. (2015) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.1016/j.bsecv.2015.03.004 · Cited by 114
Vibrational spectra and dissociation of aqueous Na2SiO3 solutions
Halász, I. Z., Agarwal, M., Li, R., & Miller, N. H. (2007) · Catalysis Letters · doi:10.1007/s10562-007-9141-6 · Cited by 101
Topological Control on Silicates’ Dissolution Kinetics
Pignatelli, I., Kumar, A., Bauchy, M., & Sant, G. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b00359 · Cited by 92
Silicate species of water glass and insights for alkali-activated green cement
Jansson, H., Bernin, D., & Ramser, K. (2015) · AIP Advances · doi:10.1063/1.4923371 · Cited by 90
Kinetics of Glass Dissolution and Zeolite Formation under Hydrothermal Conditions
Hawkins, D. B. (1981) · Clays and Clay Minerals · doi:10.1346/ccmn.1981.0290503 · Cited by 80
In situ atomic-scale observation of melting point suppression in nanometer-sized gold particles
Lee, J., Lee, J., Tanaka, T., & Mori, H. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/47/475706 · Cited by 63
Rashidian-Dezfouli, H., Rangaraju, P. R., & Kothala, V. S. K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.166 · Cited by 54
Nègre, E., Motto‐Ros, V., Pelascini, F., Lauper, S., Denis, D., & Yu, J. (2014) · Journal of Analytical Atomic Spectrometry · doi:10.1039/c4ja00363b · Cited by 40
Energy and emissions analysis of fly ash based geopolymers
Witherspoon, R., Wang, H., Aravinthan, T., & Omar, T. H. (2009) · Cited by 15
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Metadata
- Authors
- Vinai, R., & Soutsos, M.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 116
- Pages
- 45-56
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2901433319
- Cited by
- 279
- References
- 32
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.