The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: A comparative study
Open accessAbstract
Abstract Rice husk and waste glass from sources in Cameroon were used for producing sodium waterglass (NWG) solution denoted S1 and S2 respectively as alternative activators to prepare metakaolin-based geopolymer binder. Metakaolin-based geopolymer binders (G1, G2) were obtained using freshly prepared NWG with a mass ratio NWG/MK = 0.83. The IR spectra of S1, S2 using ATR and KBr methods show the presence of SiQ 0 , SiQ 1 , SiQ 2 units, and S1 contained also SiQ 3 and SiQ 4 units. The mechanical testing, environmental scanning electron microscopy, mercury intrusion porosimetry, X-ray diffractometry, infrared spectroscopy, amount of binders and thermogravimetric analysis are investigated to study the properties of the geopolymer binders. The results show that the compressive strength values of geopolymer G2 (22.9, 27.6, 32.6, 36 and 39.7 MPa) are higher than that of G1 (17.7, 19.1, 21.2, 29.9 and 32.8 MPa) at 7, 14, 21, 28 and 56 days respectively. The microstructure of G2 is more compact with fewer unreacted metakaolin particles. It can be concluded that sodium waterglass from waste glass and rice husk ash are suitable alternative activators for the production of metakaolin-based geopolymers. In addition, they constitute a better ecological choice when compared to commercial sodium silicate from melting process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Comparative study on the characteristics of fly ash and bottom ash geopolymers
Chindaprasirt, P., Jaturapitakkul, C., Chalee, W., & Rattanasak, U. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.023 · Cited by 735
Factors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Geopolymers : structure, processing, properties and industrial applications
Provis, J. L., & van Deventer, J. S. J. (2009) · Cited by 674
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Cited by
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Liu, J., Hu, L., Tang, L., & Ren, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123451 · Cited by 311
Grengg, C., Mittermayr, F., Ukrainczyk, N., Koraimann, G., Kienesberger, S., & Dietzel, M. (2018) · Water Research · doi:10.1016/j.watres.2018.01.043 · Cited by 288
Vinai, R., & Soutsos, M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.008 · Cited by 279
Metadata
- Authors
- Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 114
- Pages
- 276-289
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2328537811
- Cited by
- 335
- References
- 29
- FWCI
- 24.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: A comparative study. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2016.03.184
- The paper
- Tchakouté, H. K., Rüscher, C. H., Kong, S., Kamseu, E., & Leonelli, C. (2016). Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: A comparative study. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2016.03.184
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.