The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Micro-structural and mechanical properties of ultra-high performance engineered cementitious composites (UHP-ECC) incorporation of recycled fine powder (RFP)
Abstract
The recycled fine-powder (RFP), produced during the recycling process, will induce a serious impact on the environment with improper disposition. A potential green way to reuse RFP is to add it as supplementary cementitious material in concrete. The effects of RFP on the hydration, microstructure, shrinkage and mechanical properties of ultra-high performance engineered cementitious composites (UHP-ECC) with different replacement ratios up to 50% were investigated. The hydration kinetics were compared among the different replacement ratios using the isothermal calorimetry, which demonstrated an accelerating effect of RFP to the hydration of UHP-ECC matrix. The phase development was quantified by the thermal gravimetric analysis and proved the pozzolanic effect of RFP. The compressive and tensile properties of UHP-ECCs were obtained at 3, 7 and 28 days, respectively, to trace their development along the curing ages. The addition of RFP significantly reduced the autogenous shrinkage of UHP-ECC. Besides, the single fiber pullout test was investigated to quantify the influence of RFP at the fiber level. The environmental scanned electron microscope analysis was conducted to study the morphology of PE fiber at the fracture surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Steady‐State and Multiple Cracking of Short Random Fiber Composites
Li, V. C., & Leung, C. K. Y. (1992) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1992)118:11(2246 · Cited by 1,441
(2002) · ACI Materials Journal · doi:10.14359/12325 · Cited by 761
Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation
Xiao, J., Li, W., Sun, Z., Lange, D. A., & Shah, S. P. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.01.006 · Cited by 682
Self-citationYu, K.-Q., Yu, J.-T., Dai, J.-G., Lu, Z.-D., & Shah, S. P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.040 · Cited by 625
Self-citationWater-entrained cement-based materials
Jensen, O. M., & Hansen, P. F. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00737-8 · Cited by 619
An experimental study on optimum usage of GGBS for the compressive strength of concrete
Oner, A., & Akyuz, S. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.01.001 · Cited by 615
A strain-hardening cementitious composites with the tensile capacity up to 8%
Yu, K., Wang, Y., Yu, J., & Xu, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.060 · Cited by 582
Self-citationTrend of the research on construction and demolition waste management
Yuan, H., & Shen, L. (2011) · Waste Management · doi:10.1016/j.wasman.2010.10.030 · Cited by 574
Fiber-Bridging Constitutive Law of Engineered Cementitious Composites
Yang, E.-H., Wang, S., Yang, Y., & Li, V. C. (2008) · Journal of Advanced Concrete Technology · doi:10.3151/jact.6.181 · Cited by 535
Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites
Li, V. C., Mishra, D. K., & Wu, H. (1995) · Materials and Structures · doi:10.1007/bf02473191 · Cited by 522
Strain-hardening UHP-FRC with low fiber contents
Wille, K., Kim, D. J., & Naaman, A. E. (2011) · Materials and Structures · doi:10.1617/s11527-010-9650-4 · Cited by 510
Limestone filler cement in low w/c concrete: A rational use of energy
Bonavetti, V., Donza, H., Menéndez, G., Cabrera, O., & Irassar, E. F. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01087-6 · Cited by 462
Huang, W., Kazemi-Kamyab, H., Sun, W., & Scrivener, K. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.12.009 · Cited by 404
Quantifying construction and demolition waste: An analytical review
Wu, Z., Yu, A. T. W., Shen, L., & Liu, G. (2014) · Waste Management · doi:10.1016/j.wasman.2014.05.010 · Cited by 400
Ghafari, E., Ghahari, S. A., Costa, H., Júlio, E., Portugal, A., & Durães, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.123 · Cited by 284
Zhang, Z., & Zhang, Q. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.072 · Cited by 234
Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPa
Ding, Y., Yu, J.-T., Yu, K.-Q., & Xu, S.-L. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.034 · Cited by 227
Self-citationExperimental study on the failure mechanism of recycled concrete
Liu, Q., Xiao, J., & Sun, Z. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.007 · Cited by 214
Self-citationLi, L., Cai, Z., Yu, K., Zhang, Y. X., & Ding, Y. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.01.001 · Cited by 187
Self-citationDing, Y., Yu, K.-Q., Yu, J.-T., & Xu, S.-L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.122 · Cited by 184
Self-citationReclamation chain of waste concrete: A case study of Shanghai
Xiao, J., Ma, Z., & Ding, T. (2015) · Waste Management · doi:10.1016/j.wasman.2015.09.018 · Cited by 156
Self-citationFailure processes of modeled recycled aggregate concrete under uniaxial compression
Li, W., Xiao, J., Sun, Z., & Shah, S. P. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.06.017 · Cited by 145
Self-citationShrinkage and strength development of UHSC incorporating a hybrid system of SAP and SRA
Liu, J., Farzadnia, N., Shi, C., et al. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.029 · Cited by 143
Yu, K., Dai, J., Lu, Z.-D., & Poon, C. S. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.016 · Cited by 141
Self-citationAutogenous shrinkage of high-performance concrete containing fly ash
Lee, H. K., Lee, K. M., & Kim, B. G. (2003) · Magazine of Concrete Research · doi:10.1680/macr.2003.55.6.507 · Cited by 77
Hydration of Concrete Containing Hybrid Recycled Demolition Powders
Sun, Z., Liu, F., Tong, T., Qi, C., & Yu, Q. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001842 · Cited by 38
Cited by
Tang, Q., Ma, Z., Wu, H., & Wang, W. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103807 · Cited by 549
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106038 · Cited by 342
Self-citationLao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
The greening of engineered cementitious composites (ECC): A review
Shoji, D., He, Z., Zhang, D., & Li, V. C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126701 · Cited by 261
Metadata
- Authors
- Yu, K.-Q., Zhu, W.-J., Ding, Y., Lu, Z.-D., Yu, J.-T., & Xiao, J.-Z.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 124
- Pages
- 105813
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2958283459
- Cited by
- 295
- References
- 26
- FWCI
- 19.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.