The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing
Abstract
In this study, high solid loading and low viscosity cordierite slurries are successfully developed for the first time for photopolymerization-based additive manufacturing. The processability of the slurries is mainly determined by their rheological properties and photocuring parameters. The slurry preparation involves the orthogonal optimization of compositions in order to achieve suitable viscosity, stability and homogeneity. The photocuring parameters of the as-prepared slurries, including penetration depth Dp and critical exposure Ec, are also determined experimentally. Results show that viscosity increases with reduction in particle size. A higher solid-volume fraction also results in an exponential growth in viscosity. As for the dispersant amount, a concentration of 5 wt% leads to the lowest viscosity. Particle size also play an important role in the solid loading capacity of the slurries, as results suggest that smaller particles improve performance. In terms of the photocuring behaviors, the addition of 2 wt% photoinitiator generates an optimal curing process. 40 vol% solid loading leads to the thickest curing depth for all slurries with different types of particle sizes. Finally, a cordierite part with a complex hollow structure and a fine resolution is successfully fabricated. The present study offers a material basis for the polymerization-based 3D printing of porous cordierite structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Self-citationMetal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
Yağcı, Y., Jockusch, S., & Turro, N. J. (2010) · Macromolecules · doi:10.1021/ma1007545 · Cited by 1,432
Rapid prototyping & manufacturing— Fundamentals of stereolithography
(1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 850
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Monolithic reactors for environmental applications
Avila, P., Montes, M., & Miró, E. E. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.02.025 · Cited by 526
Additive Manufacturing of Dense Alumina Ceramics
Schwentenwein, M., & Homa, J. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12319 · Cited by 465
Ceramic suspensions suitable for stereolithography
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 351
Cure depth in photopolymerization: Experiments and theory
Lee, J. H., Prud'homme, R. K., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0485 · Cited by 312
Depth and width of cured lines in photopolymerizable ceramic suspensions
Gentry, S. P., & Halloran, J. W. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.02.033 · Cited by 274
Chen, H., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2014-0149 · Cited by 204
de Hazan, Y., & Penner, D. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.021 · Cited by 200
Digital light processing of ceramic components from polysiloxanes
Schmidt, J., & Colombo, P. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.07.033 · Cited by 170
Schwarzer, E., Götz, M., Markova, D., Stafford, D., Scheithauer, U., & Moritz, T. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.05.046 · Cited by 120
Cited by
Photopolymerization-based additive manufacturing of ceramics: A systematic review
Rasaki, S. A., Xiong, D., Xiong, S., Su, F., Idrees, M., & Chen, Z. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0468-z · Cited by 297
Self-citationChaudhary, R. P., Parameswaran, C., Idrees, M., Rasaki, A. S., Liu, C., Chen, Z., & Colombo, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100969 · Cited by 295
Self-citationCamargo, I. L. D., Morais, M. M., Fortulan, C. A., & Branciforti, M. C. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.031 · Cited by 263
Xiao, C., Zheng, K., Chen, S., Li, N., Shang, X., Wang, F., Liang, J., Khan, S. B., Shen, Y., Lu, B., et al. (2023) · Additive Manufacturing · doi:10.1016/j.addma.2023.103607 · Cited by 63
Self-citationOptimized sintering strategy for lunar regolith simulant particles bound via vat photopolymerization
Wang, C., Gong, H., Wu, H., Jin, Q., Wei, W., Liang, J., Lu, B., Chen, S., & Long, Y. (2023) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2023.127393 · Cited by 14
Metadata
- Authors
- Chen, Z., Li, J., Liu, C., Liu, Y., Zhu, J., & Lao, C.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 45
- Issue
- 9
- Pages
- 11549-11557
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2920925487
- Cited by
- 304
- References
- 17
- FWCI
- 13.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.