Simulation of bubbly flows: Comparison between direct quadrature method of moments (DQMOM) and method of classes (CM)

A Drag Coefficient Correlation

Schiller, L. (1933) · Medical Entomology and Zoology · Cited by 1,654

On the collision of drops in turbulent clouds

Saffman, P., & Turner, J. S. (1956) · Journal of Fluid Mechanics · doi:10.1017/s0022112056000020 · Cited by 1,419

Theoretical model for drop and bubble breakup in turbulent dispersions

Luo, H., & Svendsen, H. F. (1996) · AIChE Journal · doi:10.1002/aic.690420505 · Cited by 1,250

Bubble coalescence and break-up in air-sparged bubble columns

Prince, M. J., & Blanch, H. W. (1990) · AIChE Journal · doi:10.1002/aic.690361004 · Cited by 1,238

Description of aerosol dynamics by the quadrature method of moments

McGraw, R. (1997) · Aerosol Science and Technology · doi:10.1080/02786829708965471 · Cited by 1,128

On the solution of population balance equations by discretization—I. A fixed pivot technique

Kumar, S., & Ramkrishna, D. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(96)88489-2 · Cited by 1,109

On the solution of population balance equations by discretization—II. A moving pivot technique

Kumar, S., & Ramkrishna, D. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00355-x · Cited by 825

Quadrature method of moments for aggregation-breakage processes

Marchisio, D. L., Vigil, R. D., & Fox, R. O. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(02)00054-1 · Cited by 524

Terminal velocity of single bubbles in surface tension force dominant regime

Tomiyama, A., Celata, G. P., Hosokawa, S., & Yoshida, S. (2002) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(02)00032-0 · Cited by 490

One-group interfacial area transport in vertical bubbly flow

Wu, Q., Kim, S., Ishii, M., & Beus, S. G. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00167-1 · Cited by 373

Effect of interfacial forces and turbulence models on predicting flow pattern inside the bubble column

Pourtousi, M., Sahu, J. N., & Ganesan, P. B. (2013) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2013.11.001 · Cited by 187

Euler-Euler simulation of bubbly flow in a rectangular bubble column: Experimental validation with Radioactive Particle Tracking

Gupta, A., & Roy, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.11.012 · Cited by 125

Investigations on hydrodynamics and mass transfer in gas–liquid stirred reactor using computational fluid dynamics

Ranganathan, P., & Savithri, S. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.03.007 · Cited by 114

CFD simulation of gas-liquid flow in stirred tanks: Effect of drag models

Guan, X., Li, X., Yang, N., & Liu, M. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.134 · Cited by 102

Numerical Methods for the Solution of Population Balance Equations Coupled with Computational Fluid Dynamics

Shiea, M., Buffo, A., Vanni, M., & Marchisio, D. L. (2020) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-092319-075814 · Cited by 74

CFD modeling of the mixing of water in oil emulsions

Roudsari, S. F., Turcotte, G., Dhib, R., & Ein‐Mozaffari, F. (2012) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2012.06.013 · Cited by 77

Study on CFD–PBM turbulence closures based on k–ε and Reynolds stress models for heterogeneous bubble column flows

Liu, Y., & Hinrichsen, O. (2014) · Computers & Fluids · doi:10.1016/j.compfluid.2014.09.023 · Cited by 76

Discrete element simulation of particle flow in arbitrarily complex geometries

Su, J., Gu, Z., & Xu, X. Y. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.08.025 · Cited by 71

Baseline Model for the Simulation of Bubbly Flows

Rzehak, R., Krepper, E., Liao, Y., Ziegenhein, T., Kriebitzsch, S., & Lucas, D. (2015) · Chemical Engineering & Technology · doi:10.1002/ceat.201500118 · Cited by 63

Fluid dynamics in a bubble column: New experiments and simulations

Rzehak, R., Krauß, M., Kováts, P., & Zähringer, K. (2017) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2016.09.024 · Cited by 61

Computational fluid dynamics modeling of gas-solid fluidized bed reactor: Influence of numerical and operating parameters

Akbari, V., Borhani, T. N. G., Shamiri, A., & Shafeeyan, M. S. (2024) · Experimental and Computational Multiphase Flow · doi:10.1007/s42757-023-0158-x · Cited by 54

Numerical studies on dynamic characteristics of oil-water separation in loop flotation column using a population balance model

Cai, X., Chen, J., Liu, M., Ji, Y., & An, S. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.12.002 · Cited by 49

Bubbly flows with fixed polydispersity: Validation of a baseline closure model

Rzehak, R., & Krepper, E. (2015) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2015.03.005 · Cited by 47

Modeling of bubble coalescence and break-up in turbulent bubbly flow

Mukin, R. V. (2014) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2014.02.008 · Cited by 46

Modeling of bubble size distribution in isothermal gas–liquid flows: Numerical assessment of population balance approaches

Cheung, S. C. P., Deju, L., Yeoh, G. H., & Tu, J. Y. (2013) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2013.08.049 · Cited by 47

Modeling and Simulation of Photobioreactors with Computational Fluid Dynamics—A Comprehensive Review

Luzi, G., & McHardy, C. (2022) · Energies · doi:10.3390/en15113966 · Cited by 44

Investigation of gas dispersion characteristics in stirred tank and flotation cell using a corrected CFD-PBM quadrature-based moment method approach

Basavarajappa, M., & Mišković, S. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.06.026 · Cited by 43

An open‐source population balance modeling framework for the simulation of polydisperse multiphase flows

Lehnigk, R., Bainbridge, W., Liao, Y., Lucas, D., Niemi, T., Peltola, J., & Schlegel, F. (2021) · AIChE Journal · doi:10.1002/aic.17539 · Cited by 44

Simulation of a reacting gas–liquid bubbly flow with CFD and PBM: Validation with experiments

Buffo, A., Vanni, M., & Marchisio, D. L. (2016) · Applied Mathematical Modelling · doi:10.1016/j.apm.2016.11.010 · Cited by 37

Review on gas-liquid mixing analysis in multiscale stirred vessel using CFD

Sajjadi, B., Raman, A. A. A., Ibrahim, S. B., & Shah, R. S. S. R. E. (2012) · Reviews in Chemical Engineering · doi:10.1515/revce-2012-0003 · Cited by 36

Effect of current frequency on crude oil dehydration in an industrial electrostatic coalescer

Kakhki, N. A., Farsi, M., & Rahimpour, M. R. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.06.021 · Cited by 35

CFD-PBE simulation of a bubble column in OpenFOAM

Cheng, J., Li, Q., Yang, C., Zhang, Y., & Mao, Z. (2017) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2017.11.012 · Cited by 34

2D CFD-PBM simulation of hydrodynamic and particle growth in an industrial gas phase fluidized bed polymerization reactor

Akbari, V., Borhani, T. N. G., Shamiri, A., Aramesh, R., Hussain, M. A., & Hamid, M. K. A. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2015.07.016 · Cited by 30

A quadrature-based moment method for polydisperse bubbly flows

Heylmun, J. C., Kong, B., Passalacqua, A., & Fox, R. O. (2019) · Computer Physics Communications · doi:10.1016/j.cpc.2019.06.005 · Cited by 31

CFD-PBM simulation of bubble columns: Effect of parameters in the class method for solving PBEs

Zhang, X., Zheng, R.-Q., & Luo, Z. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115853 · Cited by 31

Modeling and operability analysis of water separation from crude oil in an industrial gravitational coalescer

Mohayeji, M., Farsi, M., Rahimpour, M. R., & Shariati, A. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.10.025 · Cited by 30

Approximate Moment Methods for Population Balance Equations in Particulate and Bioengineering Processes

Dürr, R., & Bück, A. (2020) · Processes · doi:10.3390/pr8040414 · Cited by 28

Mechanism of small bubble breakup in an unbaffled stirred vessel

Yamamoto, T., Fang, Y., & Komarov, S. V. (2018) · Chemical Engineering Science · doi:10.1016/j.ces.2018.12.007 · Cited by 27

Application of extended quadrature method of moments for simulation of bubbly flow and mass transfer in gas-liquid stirred tanks

Askari, E., St‐Pierre Lemieux, G., & Proulx, P. (2019) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23470 · Cited by 24

Model-based analysis of the impact of the distributor on the hydrodynamic performance of industrial polydisperse gas phase fluidized bed polymerization reactors

Akbari, V., Borhani, T. N. G., Godini, H. R., & Hamid, M. K. A. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.07.042 · Cited by 24

Modelling of Bubbly Flow Using CFD-PBM Solver in OpenFOAM: Study of Local Population Balance Models and Extended Quadrature Method of Moments Applications

Askari, E., Proulx, P., & Passalacqua, A. (2018) · ChemEngineering · doi:10.3390/chemengineering2010008 · Cited by 25

Modeling and simulation of mixing in water-in-oil emulsion flow through a valve-like element using a population balance model

Fávero, J. L., Silva, L. F. L. R., & Lage, P. L. C. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.01.017 · Cited by 22

Evaluation of hydrodynamic behavior of the perforated gas distributor of industrial gas phase polymerization reactor using CFD-PBM coupled model

Akbari, V., Borhani, T. N. G., Aramesh, R., Hamid, M. K. A., Shamiri, A., & Hussain, M. A. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.07.001 · Cited by 22

Capturing coalescence and break-up processes in vertical gas–liquid flows: Assessment of population balance methods

Deju, L., Cheung, S. C. P., Yeoh, G. H., & Tu, J. Y. (2013) · Applied Mathematical Modelling · doi:10.1016/j.apm.2013.03.063 · Cited by 21

A model for cellulase production from Trichoderma reesei in an airlift reactor

Bannari, R., Bannari, A., Vermette, P., & Proulx, P. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24473 · Cited by 21

Simulation of a Bubble Column by Computational Fluid Dynamics and Population Balance Equation Using the Cell Average Method

Li, Q., Cheng, J., Yang, C., & Mao, Z. (2017) · Chemical Engineering & Technology · doi:10.1002/ceat.201600565 · Cited by 20

Towards a CFD-PBE simulation of aerated stirred tanks at high gas hold ups and different flow regimes

Maluta, F., Paglianti, A., & Montante, G. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2021.10.018 · Cited by 19

Modelling of the Bubble Size Distribution in an Aerated Stirred Tank: Theoretical and Numerical Comparison of Different Breakup Models

Kálal, Z., Jahoda, M., & Fořt, I. (2014) · Chemical and Process Engineering New Frontiers · doi:10.2478/cpe-2014-0025 · Cited by 21

Polydispersed flow modelling using population balances in an adaptive mesh finite element framework

Bhutani, G., Brito‐Parada, P. R., & Cilliers, J. J. (2016) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2016.01.011 · Cited by 19

Numerical investigation on bubble size distribution around an underwater vehicle

Vahaji, S., Chen, L., Cheung, S. C. P., & Tu, J. Y. (2018) · Applied Ocean Research · doi:10.1016/j.apor.2018.06.013 · Cited by 18

Development of a centrifugal in-line separator for oil-water flows

Slot, J. J. (2013) · doi:10.3990/1.9789036535427 · Cited by 19

Numerical Simulation of the Turbulent Upward Flow of a Gas-Liquid Bubble Mixture in a Vertical Pipe: Comparison with Experimental Data

Губайдуллин, Д. А., & Снигерев, Б. А. (2018) · High Temperature · doi:10.1134/s0018151x18010078 · Cited by 17

Baseline Model for Bubbly Flows: Simulation of Monodisperse Flow in Pipes of Different Diameters

Kriebitzsch, S., & Rzehak, R. (2016) · Fluids · doi:10.3390/fluids1030029 · Cited by 17

Gas phase hydrodynamics in a surface‐aerated tank with a long‐short blades agitator

Wu, Y., Wang, J., You, P., & Luo, P. (2022) · AIChE Journal · doi:10.1002/aic.17680 · Cited by 15

Numerical simulation of local bubble size distribution in bubble columns operated at heterogeneous regime

Zhang, X., Yan, W., & Luo, Z. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.116266 · Cited by 15

Efficient simulation of gas–liquid pipe flows using a generalized population balance equation coupled with the algebraic slip model

Icardi, M., Ronco, G., Marchisio, D. L., & Labois, M. (2014) · Applied Mathematical Modelling · doi:10.1016/j.apm.2014.04.052 · Cited by 13

Hydrodynamic modeling of ionic liquids and conventional amine solvents in bubble column

Ali, M. F., Gan, J., Chen, X., Yu, G., Zhang, Y., Ellahi, M., & Abdeltawab, A. A. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2017.11.034 · Cited by 14

Bubble growth for boiling bubbly flow for R141b in a serpentine tube

Huang, M. Y., Yang, Z., Duan, Y., & Lee, D. (2011) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2011.02.007 · Cited by 13

CFD Prediction of Gas-Liquid Flow in an Aerated Stirred Vessel Using the Population Balance Model

Kálal, Z., Jahoda, M., & Fořt, I. (2014) · Chemical and Process Engineering New Frontiers · doi:10.2478/cpe-2014-0005 · Cited by 13

Modeling of turbulent structure of an upward polydisperse gas-liquid flow

Pakhomov, M. A., & Терехов, В. И. (2015) · Fluid Dynamics · doi:10.1134/s0015462815020076 · Cited by 12

Particle Size Distribution in CFD Simulation of Gas-Particle Flows

Niemi, T. (2012) · Cited by 12

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Guo, X., Huang, Z., Sun, J., Shuai, Y., Yang, Y., Liao, Z., Wang, J., & Yang, Y. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04178 · Cited by 14

Modeling of bubble coalescence and break-up using the Log-normal Method of Moments

Habiyaremye, V., Komen, E. M. J., Kuerten, J. G. M., & Frederix, E. M. A. (2022) · Chemical Engineering Science · doi:10.1016/j.ces.2022.117577 · Cited by 13

An improved design method for compact vertical separator combined with the theoretical method and numerical simulation

Li, H., Chen, J., Wang, J., Gong, J., & Yu, B. (2018) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2018.10.066 · Cited by 11

Comparison of breakup and coalescence kernels in population balance model for modeling isothermal gas-liquid flow

Ma, Y., Hu, G. D., Zhang, H., & Liu, Q. (2021) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2021.111616 · Cited by 11

On the dynamics of instabilities in two-fluid models for bubbly flows

Jareteg, K., Ström, H., Sasic, S., & Demazière, C. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.03.063 · Cited by 11

Application of N-phase algebraic slip model and direct quadrature method of moments to the simulation of air-water flow in vertical risers and bubble column reactor

Świderski, K., Narayanan, C., & Lakehal, D. (2016) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2016.04.023 · Cited by 11

Computational fluid dynamics (CFD)- deep neural network (DNN) model to predict hydrodynamic parameters in rectangular and cylindrical bubble columns

Dhakane, V., Mishra, P., & Yadav, A. (2024) · Digital Chemical Engineering · doi:10.1016/j.dche.2024.100185 · Cited by 10

Population Balance Equation of Cohesive Particle Flow in a Circulating Fluidized Bed

Sun, L., Luo, K., & Fan, J. (2017) · Chemical Engineering & Technology · doi:10.1002/ceat.201600711 · Cited by 9

An investigation on the performance of a FTS fixed-bed reactor using CFD methods

Irani, M., Alizadehdakhel, A., Pour, A. N., Proulx, P., & Tavassoli, A. (2011) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2011.05.005 · Cited by 9

Coupling of CFD Simulations and Population Balance Modeling to Predict Brownian Coagulation in an Emulsion Polymerization Reactor

Ariafar, S., Sheibat‐Othman, N., & McKenna, T. F. L. (2017) · Macromolecular Reaction Engineering · doi:10.1002/mren.201600054 · Cited by 9

A Quadrature Method of Moments for Polydisperse Flow in Bubble Columns Including Poly-Celerity, Breakup and Coalescence

Acher, T., Dems, P., Lenz, S., Gobert, C., & Polifke, W. (2014) · The Journal of Computational Multiphase Flows · doi:10.1260/1757-482x.6.4.457 · Cited by 8

Optimization of oxygen transfer and power consumption in aerobic bioprocess by designing disc turbine impeller based on CFD-Taguchi method

Gu, Q., Yang, S., Mohsin, A., Yu, J., Zhuang, Y., & Li, C. (2025) · Scientific Reports · doi:10.1038/s41598-025-92463-1 · Cited by 7

Coalescence efficiency of bubbles in bubble columns

Bizmark, N., Mostoufi, N., Mehrnia, M. R., Zarringhalam, S. M., & Yazdani, A. (2011) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.20664 · Cited by 7

Modeling of Flow Structure, Bubble Distribution, and Heat Transfer in Polydispersed Turbulent Bubbly Flow Using the Method of Delta Function Approximation

Pakhomov, M. A., & Terekhov, V. I. (2019) · Journal of Engineering Thermophysics · doi:10.1134/s1810232819040015 · Cited by 7

Numerical prediction of cyclone efficiency curve using an Eulerian-Eulerian approach

Mendes, F. Q., & Noriler, D. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.10.032 · Cited by 7

Numerical Solutions of Population Balance Equations within Liquid/Gas‐Liquid Flow Simulations

Bayraktar, E., Mierka, O., & Turek, S. (2013) · Chemie Ingenieur Technik · doi:10.1002/cite.201200225 · Cited by 7

A numerical framework for bubble transport in a subcooled fluid flow

Jareteg, K., Sasic, S., Vinai, P., & Demazière, C. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.05.033 · Cited by 7

Theoretical and numerical study of collision and coalescence - Statistical modeling approaches in gas-droplet turbulent flows

Wünsch, D. (2009) · theses.fr (ABES) · doi:10.70675/8ce22c0fze72az4663zbe3bz2b48a14214f7 · Cited by 7

Impact of Population Balance Modeling on the Prediction of Cryogenic Cavitation in Aerospace Propulsion Systems

Giorgi, M. G. D., Ficarella, A., & Fontanarosa, D. (2018) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2018-4859 · Cited by 6

A comprehensive computational framework for gas–liquid flows in stirred reactors using CFD-PBE within OpenFOAM

Wang, C., Wang, H., Chen, S., Yang, L., Li, Z., Cheng, J., & Yang, C. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.161277 · Cited by 5

Applications of tomography in bubble column and trickle bed reactors

Holland, D. J. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-118-4.00018-6 · Cited by 5

Optimization of crude oil dehydration in an industrial spiral-type gravitational coalescer

Mohayeji, M., Farsi, M., & Rahimpour, M. R. (2016) · Separation Science and Technology · doi:10.1080/01496395.2016.1205090 · Cited by 5

Evaluation of direct quadrature method of moment for the internally circulating fluidized bed simulation with ultrafine particles

Chen, J., Tianyi, Y., Dan, L., Li, J., Han, C., Guangbin, Y., Chenxi, Z., & Xiaogang, L. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.05.025 · Cited by 5

Simulation of the Bubble Behaviors for Gas–Liquid Dispersion in Agitated Vessel

Liu, T., Sheng, Y., Han, L.-H., & Liu, Q. (2017) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.16we023 · Cited by 5

Numerical simulation of the separation characteristics of oil droplets in swirling flotation based on CFD-PBM

Ai, X., Cai, X., Han, H., Guodong, D., & Guan, S. (2024) · Separation Science and Technology · doi:10.1080/01496395.2024.2315606 · Cited by 4

Modeling and Simulation of Evaporating Spray Flows with Coalescence in an Eulerian Framework

Gopireddy, S. R., Humza, R. M., & Gutheil, E. (2012) · Chemie Ingenieur Technik · doi:10.1002/cite.201100187 · Cited by 4

Cavitation modelling based on Eulerian-Eulerian multiphase flow

Bannari, R., Proulx, P., Cupillard, S., & Page, M. A. (2011) · Cited by 4

Research on internal flow characteristics of gas-liquid two-phase flow in reactor coolant pump

Tian, C., Long, Y., & Zhang, M. (2025) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2025.106018 · Cited by 3

Simulation of direct chlorination of ethylene in a two-phase reactor by coupling equilibrium, kinetic and population balance models

Moradi, Z., & Farsi, M. (2020) · Chemical Product and Process Modeling · doi:10.1515/cppm-2020-0061 · Cited by 3

Study of Flow Characteristics of Ultrafine CaCO3 Powders in a Spouted Bed

Sun, L., Wang, S., Liu, G., & Lu, H. (2017) · Chemical Engineering & Technology · doi:10.1002/ceat.201600384 · Cited by 3

An open-source computational framework for the solution of the bivariate population balance equation

Singh, D. K., Brito‐Parada, P. R., & Bhutani, G. (2022) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2022.107780 · Cited by 3

Experimental and CFD investigation of the mixing of MMA emulsion polymerization in a stirred tank reactor

Roudsari, S. F. (2021) · doi:10.32920/ryerson.14652804 · Cited by 3

The prediction of the cavitation phenomena including population balance modeling

Bannari, R., Hliwa, G. Z., Bannari, A., & Belghiti, M. T. (2017) · AIP conference proceedings · doi:10.1063/1.4992159 · Cited by 2

Impact of the initialisation on population balance CFD models coupled with two-phase flow

Hliwa, G. Z., Bannari, R., & Belghiti, M. T. (2017) · AIP conference proceedings · doi:10.1063/1.4992190 · Cited by 2

Simulation of drop breakage in liquid–liquid system by coupling of CFD and PBM: Comparison of breakage kernels and effects of agitator configurations

Xie, R., Li, J., Yang, J., Zou, D., & Chen, M. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.10.021 · Cited by 2

Computational fluid dynamic modeling of fluidized-bed polymerization reactors

Rokkam, R. G., & USDOE Office of Science (SC) (2012) · doi:10.2172/1082969 · Cited by 2

Population balance modelling of gas-liquid bubbly flow: capturing coalescence and breakup processes

Deju, L. (2014) · RMIT Research Repository (RMIT University Library) · doi:10.25439/rmt.27601623 · Cited by 2

Investigation of Droplets Distribution and Reaction Kinetics on SO2 Removal in Flue Gas via Venturi Scrubber

Zhang, S., Cui, W., Wang, C., Wu, T., & Zhao, X. (2020) · Complexity · doi:10.1155/2020/6107312 · Cited by 1

Numerical Analysis of Air Injection as a Scour Control Technique in Flow

Ghalati, A. R., Maddahian, R., & Neyshabouri, S. A. A. S. (2023) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-023-01135-5 · Cited by 1

Euler-Euler Modeling of Poly-Dispersed Bubbly Flows

Rzehak, R. (2016) · Springer eBooks · doi:10.1007/978-981-4585-86-6_4-1 · Cited by 1

Challenges in Two-fluid Modeling Applied to Large-scale Bubble Plumes

Haley, A. J. (2018) · DalSpace (Dalhousie University) · Cited by 1

Combination of population balance equation and multi‐layer capacitor theory for modelling of an industrial Dual Polarity® electrostatic treater

Kakhki, N. A., Shooshtari, M., & Karimi, M. (2024) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.25189 · Cited by 1

Chemical Looping Combustion Reactions and Systems

Sarofim, A. F., Lighty, J. S., Smith, P., Whitty, K. J., Eyring, E. M., Sahir, A. H., Alvarez, M., Hradisky, M., Clayton, C., Konya, G., et al. (2014) · doi:10.2172/1126722

CFD Study of Gas-liquid Hydrodynamics in a Bubble Column

Shahimie, S. M., & Gimbun, J. (2011) · UMP Institutional Repository (Universiti Malaysia Pahang)

Applications of tomography in bubble column and fixed bed reactors

Holland, D. J. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823015-2.00020-0

Euler-Euler Modeling of Poly-dispersed Bubbly Flows

Rzehak, R. (2023) · Springer eBooks · doi:10.1007/978-981-287-092-6_4

CFD and Microbubbles

Yadav, D. A. (2025) · Wiley eBooks · doi:10.1002/9781394249411.ch7

Scale-up of Emulsion Polymerization Process : impact of changing characteristic times

Ariafar, S. (2016) · doi:10.70675/46b4de1aze4b3z47bbzab2ez49bc5e677fe5

Challenges in applying the PSPG/SUPG Finite element method to the atmosphéric boundary layer

Nishio, Y. (2021) · doi:10.70675/46ef9fdbz6cc2z47a7zb312zca8fcf5e787d

Simulation of coalescence, break up and mass transfer in bubble columns by using the Conditional Quadrature Method of Moments in OpenFOAM

Buffo, A., Marchisio, D. L., Vanni, M., & Renze, P. (2013) · PORTO@Iris · Cited by 1

A Quadrature Method of Moments for Polydisperse Flow in Bubble Columns Including Poly-Celerity, Breakup and Coalescence

Acher, T., Dems, P., Lenz, S., Gobert, C., & Polifke, W. (2014) · The Journal of Computational Multiphase Flows · doi:10.1260/1757-482x.6.4.457 · Cited by 8

Direct quadrature method of moments for isothermal bubbly flows

Cheung, S. C. P., Yeoh, G. H., & Tu, J. Y. (2009) · RMIT Research Repository (RMIT University Library) · Cited by 1

Simulation of Coalescence, Breakup, and Mass Transfer in Polydisperse Multiphase Flows

Renze, P., Buffo, A., Marchisio, D. L., & Vanni, M. (2014) · Chemie Ingenieur Technik · doi:10.1002/cite.201400004 · Cited by 25

Experimental investigation of local bubble properties: Comparison to the sectional quadrature method of moments

Schäfer, J., Hlawitschka, M. W., Attarakih, M. M., & Bart, H. (2019) · AIChE Journal · doi:10.1002/aic.16694 · Cited by 16