Energy and CO2 emission assessments of alkali-activated concrete and Ordinary Portland Cement concrete: A comparative analysis of different grades of concrete
Open accessThe DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
Research has shown that alkali-activated concrete (AAC) is comparable to ordinary Portland cement concrete (OPCC) in terms of mechanical properties and may offer ecological benefits compared to OPCC. This study evaluates the energy and emission of AAC and OPCC across different classifications of concrete compressive strength (40, 60, and 100 MPa). Analysis indicates that the selection of constituent materials can substantially affect the energy and emission of AAC and OPCC. Ordinary Portland cement (OPC) is the principal contributor to the energy and emission of OPCC, accounting for 80% of energy and 91% of emissions of OPCC. The activating solution, meanwhile, is the main contributor to the energy and CO2 emission of AAC. Normal strength AAC (40 MPa) shows 46% less energy and 73% less CO2 emission than OPCC. However, high-strength AAC (60 MPa), using metakaolin as a base material, experiences higher energy (8%) than OPCC yet the emission is 40% less than OPCC. A substitution of fly ash for metakaolin results in superior efficiency of AAC compared to OPCC. Two mixtures of ultra-high-strength AAC (100 MPa) result in contradictory findings. One mixture with a sodium hydroxide and silica fume activating solution shows 5% and 30% less energy and CO2 emission, while the other mixture with a sodium hydroxide and sodium silicate activating mixture is less efficient than OPCC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Industrially interesting approaches to “low-CO2” cements
Gartner, E. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.01.021 · Cited by 2,016
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Nath, P., & Sarker, P. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.080 · Cited by 1,557
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Huntzinger, D. N., & Eatmon, T. D. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.007 · Cited by 1,392
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Embodied energy and carbon in construction materials
Hammond, G. P., & Jones, C. I. (2008) · Proceedings of the Institution of Civil Engineers - Energy · doi:10.1680/ener.2008.161.2.87 · Cited by 994
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
PROPERTIES OF GEOPOLYMER CEMENTS
Davidovits, J. (1994) · Cited by 926
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
DEVELOPMENT AND PROPERTIES OF LOW-CALCIUM FLY ASH-BASED GEOPOLYMER CONCRETE
Hardjito, D., & Rangan, B. V. (2005) · eSpace (Curtin University) · Cited by 822
Hasanbeigi, A., Price, L., & Lin, E. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.07.019 · Cited by 686
Properties of fly ash geopolymer concrete designed by Taguchi method
Olivia, M., & Nikraz, H. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.10.036 · Cited by 615
Nath, P., & Sarker, P. K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.034 · Cited by 574
Nath, P., & Sarker, P. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.08.008 · Cited by 518
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Brice, D. G. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9015-9 · Cited by 494
Fracture behaviour of heat cured fly ash based geopolymer concrete
Sarker, P. K., Haque, R., & Ramgolam, K. V. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.08.005 · Cited by 436
Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method
Hadi, M. N. S., Farhan, N. A., & Sheikh, M. N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.131 · Cited by 431
Review of availability of source materials for geopolymer/sustainable concrete
Assi, L. N., Carter, K., Deaver, E., & Ziehl, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121477 · Cited by 391
Self-citationTeh, S. H., Wiedmann, T., Castel, A., & de Burgh, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.122 · Cited by 360
Minimising the global warming potential of clay based geopolymers
Heath, A., Paine, K., & McManus, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.04.046 · Cited by 352
Life cycle assessment of geopolymer concrete
Salas, D. A., Ramirez, A. D., Ulloa, N., Baykara, H., & Boero, A. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.123 · Cited by 347
Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature
Xie, T., & Ozbakkaloglu, T. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.031 · Cited by 344
Life cycle inventories for the production of sodium silicates
Fawer, M., Concannon, M., & Rieber, W. (1999) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979498 · Cited by 334
Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Sustainable concrete: Building a greener future
Assi, L., Carter, K., Deaver, E. (., Anay, R., & Ziehl, P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.123 · Cited by 273
Self-citationMechanical properties and microstructure analysis of fly ash geopolymeric recycled concrete
Shi, X. S., Collins, F. G., Zhao, X. L., & Wang, Q. Y. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.07.070 · Cited by 268
Parametric Studies on Compressive Strength of Geopolymer Concrete
Vora, P. R., & Dave, U. V. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.01.030 · Cited by 248
Kusbiantoro, A., Nuruddin, M. F., Shafiq, N., & Qazi, S. A. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.06.064 · Cited by 215
Investigation of early compressive strength of fly ash-based geopolymer concrete
Assi, L. N., Deaver, E. (., ElBatanouny, M. K., & Ziehl, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.008 · Cited by 203
Self-citationParthiban, K., & Saravana Raja Mohan, K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.050 · Cited by 179
Carbon Dioxide Uptake by Cement-Based Materials: A Spanish Case Study
Sanjuán, M. Á., Andrade, C., Mora, P., & Zaragoza, A. (2020) · Applied Sciences · doi:10.3390/app10010339 · Cited by 170
Environmental Life Cycle Inventory of Portland Cement Concrete
Nisbet, M., VanGeem, M. G., Gajda, J., & Marceau, M. L. (1997) · World cement · Cited by 163
Wu, M. X., Zhang, Y., Ji, Y., Liu, G., Liu, C., She, W., & Sun, W. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.079 · Cited by 154
Formulation and performance of flash metakaolin geopolymer concretes
Pouhet, R., & Cyr, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.061 · Cited by 147
Assi, L. N., Ghahari, S., Deaver, E., Leaphart, D. M., & Ziehl, P. H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.069 · Cited by 133
Self-citationLife Cycle Inventory of Portland Cement Manufacture
Marceau, M. L., Nisbet, M., & VanGeem, M. G. (2006) · Cited by 131
Low-Calcium fly ash-based geopolymer concrete: Reinforced beams and columns
Sumajouw, M. D. J., & Rangan, B. V. (2006) · eSpace (Curtin University) · Cited by 112
Life cycle assessment of a cement plant in Naypyitaw, Myanmar
Thwe, E., Khatiwada, D., & Gasparatos, A. (2020) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2020.100007 · Cited by 106
Synthesis of geopolymer from industrial wastes
Nazari, A., & Sanjayan, J. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.003 · Cited by 102
Hills, T., Florin, N., & Fennell, P. S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.129 · Cited by 92
Study of mechanical and microstructural properties of geopolymer concrete with GGBS and Metakaolin
Kumar, P., Pankar, C., Manish, D., & Santhi, A. S. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.10.054 · Cited by 71
Life Cycle Assessment of Geopolymer Concrete – What is the Environmental Benefit
Stengel, T., Heinz, D., & Reger, J. (2009) · Cited by 48
Long Term Engineering Properties of Fly Ash Geopolymer Concrete
Gunasekara, C., Law, D. W., & Setunge, S. (2016) · Sustainable construction materials and technologies · doi:10.18552/2016/scmt4s109 · Cited by 16
Cited by
Low-CO2 emission strategies to achieve net zero target in cement sector
Supriya, Chaudhury, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137466 · Cited by 576
Oti, J., Adeleke, B. O., Anowie, F. X., Kinuthia, J. M., & Ekwulo, E. (2024) · Materials · doi:10.3390/ma17081792 · Cited by 19
Metadata
- Authors
- Alsalman, A., Assi, L. N., Kareem, R. S., Carter, K., & Ziehl, P.
- Venue
- Cleaner Environmental Systems
- Publisher
- Elsevier BV
- Published
- 2021-12
- Volume
- 3
- Pages
- 100047
- ISSN
- 2666-7894 (ISSN-L)
- OpenAlex
- W3189273443
- Cited by
- 344
- References
- 50
- FWCI
- 26.00
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.