CoChat
Cited by 231

The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.

Fluid flow and CO2–fluid–mineral interactions during CO2-storage in sedimentary basins

Open access
Kampman, Niko, Bickle, Mike, Wigley, Max, Dubacq, Benoit · 2014 · Chemical Geology

Abstract

Modelling the progress of geochemical processes in CO2 storage sites is frustrated by uncertainties in the rates of CO2 flow and dissolution, and in the rates and controlling mechanisms of fluid–mineral reactions that stabilise the CO2 in geological reservoirs. Dissolution of CO2 must be controlled by the complexities of 2-phase flow of CO2 and formation brines and the smaller-scale heterogeneities in the permeability in the reservoirs which increase the fluid contact areas. The subsequent fluid mineral reactions may increase storage security by precipitating CO2 in carbonate minerals but the consequences of fluid–mineral reactions on caprock rocks or potential leakage pathways up fault zones are less certain as the CO2-charged brines may either corrode minerals or decrease permeabilities by precipitating carbonates. Observations from CO2-injection experiments and natural analogues provide important constraints on the rates of CO2 and brine flow and on the progress of CO2 dissolution and mineral–fluid reactions. In these experiments brines in contact with the propagating plume appear to rapidly saturate with CO2. Dissolution of the CO2 drives the dissolution of oxide and carbonate minerals, on times scales of days to weeks. These reactions buffer fluid pH and produce alkalinity such that carbonate dissolution moves to carbonate precipitation over time-scales of weeks to months. The dissolution of Fe-oxide grain coatings and the release of Fe to solution is important in stabilising insoluble Fe–Mg–Ca carbonate minerals but the rate limiting step for carbonate mineral precipitation is the transport of CO2-charged brines and silicate mineral dissolution rates. Observations from CO2-EOR experiments and natural analogues suggest that the silicate mineral dissolution reactions are initially fast in the low pH fluids surrounding the CO2 plume but that reaction progress over months to years drives minerals towards thermodynamic equilibrium and dissolution rates slow over 2–5 orders of magnitude as equilibrium is approached. The sluggish dissolution of silicate minerals is likely to preside over the long-term fate of the CO2 in geological reservoirs. Observations from injection experiments and natural analogues suggest that the potentially harmful trace elements mobilised by the drop in pH are immobilised as adsorbed and precipitated phases as fluid pH is buffered across mineral reaction fronts. There are very few observations of caprock exposed to CO2-rich brines. Preliminary examination of core recently recovered from scientific drilling of a natural CO2 accumulation in Utah suggests that the diffusion of CO2 into reservoir caprocks drives dissolution of Fe-oxides but subsequent precipitation of carbonate minerals likely retards the diffusion distance of the CO2. At this site thin siltstone layers are shown to be effective seals to the CO2-charged fluids, which has significant implications for the long term security of CO2 in geological reservoirs.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.chemgeo.2013.11.012

Cites

11 of 11 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 11 references

Cited by

Metadata

Authors
Kampman, N., Bickle, M., Wigley, M., & Dubacq, B.
Venue
Chemical Geology
Publisher
Elsevier BV
Published
2014-03
Volume
369
Pages
22-50
ISSN
0009-2541 (ISSN-L)
OpenAlex
W2086198854
Cited by
231
References
11
FWCI
10.09
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fluid flow and CO2–fluid–mineral interactions during CO2-storage in sedimentary basins. https://app.cochat.ai/papers/10.1016/j.chemgeo.2013.11.012
The paper
Kampman, N., Bickle, M., Wigley, M., & Dubacq, B. (2014). Fluid flow and CO2–fluid–mineral interactions during CO2-storage in sedimentary basins. Chemical Geology. https://doi.org/10.1016/j.chemgeo.2013.11.012

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.