The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon: Insights into the adsorption mechanisms
Abstract
In this study, activated carbon was derived from pulverized waste tires using carbonization and chemical activation techniques. Single and competitive batch adsorption experiments for the removal of three synthetic heavy metal ions (Pb2+, Cu2+ and Zn2+) from an aqueous solution were performed to benchmark the efficiency of the Tire-derived Activated Carbon (TAC) in comparison to that of commercial activated carbon (CAC), which was used as the reference material. The sorbents physicochemical properties with corresponding adsorption mechanisms were evaluated by different experimental techniques. TAC exhibited great potential to adsorb heavy metals, with monolayer adsorption capacities as high as 322.5, 185.2, and 71.9 mg g-1 for Pb2+, Cu2+ and Zn2+, respectively, which were significantly higher than the adsorption capacities exhibited by CAC, which were 42.5, 15.0, and 14.0 mg∙g-1 for Pb2+, Cu2+ and Zn2+, respectively. Competitive adsorption results demonstrated the adsorption ability of sorbents is restricted by presence of other ions, and was decreased compared to the single sorption. Sorption kinetics data, with better fit to the pseudo-second order kinetics model, revealed that TAC had faster sorption rate in comparison to CAC. The adsorption capacities of TAC and CAC were reduced to half of their initial capacities after three successive adsorption-desorption cycles. Zeta potential, FT-IR, and XPS analyses revealed that electrostatic attraction and surface complexation mechanisms, as two metal-adsorbing mechanisms, were more influential for TAC. For CAC, a higher cation exchange capacity (CEC) value indicated that the removal of heavy metals by ion exchange was the predominant mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Infrared Spectroscopy: Fundamentals and Applications
Stuart, B. H. (2004) · Analytical Techniques in the Sciences · doi:10.1002/0470011149 · Cited by 4,427
Adsorption isotherm models: Classification, physical meaning, application and solving method
Wang, J., & Guo, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127279 · Cited by 2,289
Adsorption Analysis: Equilibria and Kinetics: (With CD Containing Computer Matlab Programs)
Do, D. D. (1998) · Series on Chemical Engineering · doi:10.1142/p111 · Cited by 1,919
Bansal, R. C., & Goyal, M. (2005) · CRC Press eBooks · doi:10.1201/9781420028812 · Cited by 1,865
Mechanisms of metal sorption by biochars: Biochar characteristics and modifications
Li, H., Dong, X., da Silva, E. B., de Oliveira, L. M., Chen, Y., & Ma, L. Q. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.03.072 · Cited by 1,822
Vardhan, K. H., Kumar, P. S., & Panda, R. C. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111197 · Cited by 1,618
Thomas, G. W. (1982) · Agronomy Monographs · doi:10.2134/agronmonogr9.2.2ed.c9 · Cited by 1,249
Prahas, D., Kartika, Y., Indraswati, N., & Ismadji, S. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.08.032 · Cited by 873
Cited by
Isotherm models for adsorption of heavy metals from water - a review
Chen, X., Hossain, M. F., Duan, C., Lu, J., Tsang, Y. F., Islam, M. S., & Zhou, Y. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.135545 · Cited by 623
Adsorption of heavy metals on natural zeolites: A review
Velarde, L., Nabavi, M. S., Escalera, E., Antti, M.-L., & Akhtar, F. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138508 · Cited by 491
Bouchelkia, N., Tahraoui, H., Amrane, A., Belkacemi, H., Bollinger, J.-C., Bouzaza, A., Zoukel, A., Zhang, J., & Mouni, L. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.12.028 · Cited by 124
Production, Types, and Applications of Activated Carbon Derived from Waste Tyres: An Overview
Muttil, N., Jagadeesan, S., Chanda, A., Duke, M., & Singh, S. K. (2022) · Applied Sciences · doi:10.3390/app13010257 · Cited by 87
Pereira, L., Castillo, V., Calero, M., Blázquez, G., Solís, R. R., & Martín-Lara, M. Á. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105386 · Cited by 45
Metadata
- Authors
- Shahrokhi-Shahraki, R., Benally, C., El-Din, M. G., & Park, J.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 264
- Issue
- Pt 1
- Pages
- 128455
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W3091717270
- Cited by
- 428
- References
- 74
- FWCI
- 16.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon: Insights into the adsorption mechanisms. https://app.cochat.ai/papers/10.1016/j.chemosphere.2020.128455
- The paper
- Shahrokhi-Shahraki, R., Benally, C., El-Din, M. G., & Park, J. (2021). High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon: Insights into the adsorption mechanisms. Chemosphere. https://doi.org/10.1016/j.chemosphere.2020.128455
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.