The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
A framework for data-driven digital twins of smart manufacturing systems
Open accessAbstract
Adoption of digital twins in smart factories, that model real statuses of manufacturing systems through simulation with real time actualization, are manifested in the form of increased productivity, as well as reduction in costs and energy consumption. The sharp increase in changing customer demands has resulted in factories transitioning rapidly and yielding shorter product life cycles. Traditional modeling and simulation approaches are not suited to handle such scenarios. As a possible solution, we propose a generic data-driven framework for automated generation of simulation models as basis for digital twins for smart factories. The novelty of our proposed framework is in the data-driven approach that exploits advancements in machine learning and process mining techniques, as well as continuous model improvement and validation. The goal of the framework is to minimize and fully define, or even eliminate, the need for expert knowledge in the extraction of the corresponding simulation models. We illustrate our framework through a case study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chandola, V., Banerjee, A., & Kumar, V. (2009) · ACM Computing Surveys · doi:10.1145/1541880.1541882 · Cited by 11,687
Simulation Modeling and Analysis.
Schervish, M. J., Law, A. M., & Kelton, W. D. (1983) · Journal of the American Statistical Association · doi:10.2307/2288169 · Cited by 8,697
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612 · cited 2×
“This enables the digitally extracted simulation model to be a high-fidelity replica of the real entity that it is modeling in real-time (Kritzinger et al., 2018), (Tao et al., 2019).”
BackgroundInfluentialDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Workflow mining: discovering process models from event logs
van der Aalst, W., Weijters, T., & Maruster, L. (2004) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2004.47 · Cited by 2,203
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
Tutorial on maximum likelihood estimation
Myung, I. J. (2003) · Journal of Mathematical Psychology · doi:10.1016/s0022-2496(02)00028-7 · Cited by 1,802
Tao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,487
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
The Digital Twin: Realizing the Cyber-Physical Production System for Industry 4.0
Uhlemann, T. H.-J., Lehmann, C., & Steinhilper, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.152 · Cited by 994
Industry 4.0: Adoption challenges and benefits for SMEs
Masood, T., & Sonntag, P. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103261 · Cited by 682
Digital Twin as a Service (DTaaS) in Industry 4.0: An Architecture Reference Model
Aheleroff, S., Xu, X., Zhong, R. Y., & Lu, Y. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2020.101225 · Cited by 658
Toward a Digital Twin for real-time geometry assurance in individualized production
Söderberg, R., Wärmefjord, K., Carlson, J. S., & Lindkvist, L. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.038 · Cited by 637
Digital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2021) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 621
An application framework of digital twin and its case study
Zheng, Y., Yang, S., & Cheng, H. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0911-3 · Cited by 593
An Empirical Comparison of Model Validation Techniques for Defect Prediction Models
Tantithamthavorn, C., McIntosh, S., Hassan, A. E., & Matsumoto, K. (2017) · IEEE Transactions on Software Engineering · doi:10.1109/tse.2016.2584050 · Cited by 574
Digital Twin for rotating machinery fault diagnosis in smart manufacturing
Wang, J., Ye, L., Gao, R. X., Li, C., & Zhang, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1552032 · Cited by 552
Cavalcante, I. M., Frazzon, E. M., Forcellini, F. A., & Ivanov, D. (2019) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2019.03.004 · Cited by 527
The Smart Factory: Exploring Adaptive and Flexible Manufacturing Solutions
Radziwon, A., Bilberg, A., Bogers, M., & Madsen, E. S. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.03.108 · Cited by 485
Ding, K., Chan, F. T. S., Zhang, X., Zhou, G., & Zhang, F. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1566661 · Cited by 456
Reconfigurable manufacturing systems: Principles, design, and future trends
Koren, Y., Gu, X., & Guo, W. (2018) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0483-0 · Cited by 434
Knowledge-driven digital twin manufacturing cell towards intelligent manufacturing
Zhou, G., Zhang, C., Li, Z., Ding, K., & Wang, C. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1607978 · Cited by 423
Leng, J., Liu, Q., Ye, S., Jing, J., Wang, Y., Zhang, C., Zhang, D., & Chen, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101895 · Cited by 342
Digital twin-based WEEE recycling, recovery and remanufacturing in the background of Industry 4.0
Wang, X. V., & Wang, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1497819 · Cited by 330
Alexopoulos, K., Nikolakis, N., & Chryssolouris, G. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1747642 · Cited by 309
Van Der Aalst, W. (2012) · Communications of the ACM · doi:10.1145/2240236.2240257 · Cited by 292
Digital twins for collaborative robots: A case study in human-robot interaction
Malik, A. A., & Brem, A. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102092 · Cited by 284
Morariu, C., Morariu, O., Răileanu, S., & Borangiu, T. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103244 · Cited by 226
Fault detection and classification using artificial neural networks
Heo, S., & Lee, J. H. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.09.380 · Cited by 222
Yelles-Chaouche, A. R., Gurevsky, E., Brahimi, N., & Dolgui, A. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1813913 · Cited by 202
Opportunities for Industry 4.0 to Support Remanufacturing
Yang, S., M. R., A. R., Kaminski, J., & Pepin, H. (2018) · Applied Sciences · doi:10.3390/app8071177 · Cited by 190
Qi, Y., Mao, Z., Zhang, M., & Guo, H. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107747 · Cited by 174
Dynamic Evaluation Method of Machining Process Planning Based on Digital Twin
Liu, J., Zhou, H., Liu, X., Tian, G., Wu, M., Cao, L., & Wang, W. (2019) · IEEE Access · doi:10.1109/access.2019.2893309 · Cited by 167
A data-driven simulation to support remanufacturing operations
Goodall, P. A., Sharpe, R. G., & West, A. A. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.11.001 · Cited by 151
New Paradigm of Data-Driven Smart Customisation through Digital Twin
Wang, X., Wang, Y., Tao, F., & Liu, A. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.07.023 · Cited by 150
Automated manufacturing system discovery and digital twin generation
Lugaresi, G., & Matta, A. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.01.005 · Cited by 145
2018 Winter Simulation Conference (WSC)
(2018) · doi:10.1109/wsc40006.2018 · Cited by 143
A Reconfigurable Modeling Approach for Digital Twin-based Manufacturing System
Zhang, C., Xu, W., Liu, J., Liu, Z., Zhou, Z., & Pham, D. T. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.141 · Cited by 115
Qamsane, Y., Chen, C.-Y., Balta, E. C., Kao, B.-C., Mohan, S., Moyne, J. R., Tilbury, D. M., & Barton, K. L. (2019) · IEEE International Conference on Automation Science and Engineering (CASE) · doi:10.1109/coase.2019.8843269 · Cited by 92
Digital Twin: Values, Challenges and Enablers
Rasheed, A., San, O., & Kvamsdal, T. (2019) · arXiv · doi:10.48550/arxiv.1910.01719 · Cited by 81
Smart Manufacturing Real-Time Analysis Based on Blockchain and Machine Learning Approaches
Shahbazi, Z., & Byun, Y.-C. (2021) · Applied Sciences · doi:10.3390/app11083535 · Cited by 73
Acoustic Anomaly Detection in Additive Manufacturing with Long Short-Term Memory Neural Networks
Becker, P., Roth, C., Roennau, A., & Dillmann, R. (2020) · IEEE International Conference on Industrial Engineering and Applications (ICIEA) · doi:10.1109/iciea49774.2020.9102002 · Cited by 61
Industry 4.0: Some Challenges and Opportunities for Reliability Engineering
Farsi, M. A., & Zio, E. (2019) · International Journal of Reliability Risk and Safety Theory and Application · doi:10.30699/ijrrs.2.1.4 · Cited by 57
Data quality problems in discrete event simulation of manufacturing operations
Bokrantz, J., Skoogh, A., Lämkull, D., Hanna, A., & Perera, T. (2017) · SIMULATION · doi:10.1177/0037549717742954 · Cited by 46
Reliability Assessment in the Context of Industry 4.0: Data as a Game Changer
Lazarova‐Molnar, S., & Mohamed, N. (2019) · Procedia Computer Science · doi:10.1016/j.procs.2019.04.092 · Cited by 42
Self-citationCorrelation Miner: Mining Business Process Models and Event Correlations Without Case Identifiers
Pourmirza, S., Dijkman, R., & Grefen, P. (2017) · International Journal of Cooperative Information Systems · doi:10.1142/s0218843017420023 · Cited by 39
Towards Data-Driven Reliability Modeling for Cyber-Physical Production Systems
Friederich, J., & Lazarova‐Molnar, S. (2021) · Procedia Computer Science · doi:10.1016/j.procs.2021.03.073 · Cited by 31
Self-citationA Pilot Study of Industry 4.0 Asset Interoperability Challenges in an Industry 4.0 Laboratory
Jepsen, S. C., Mørk, T. I., Hviid, J., & Worm, T. (2020) · IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) · doi:10.1109/ieem45057.2020.9309952 · Cited by 30
Hierarchical Spatial-Temporal State Machine for Vehicle Instrument Cluster Manufacturing
Maniak, T., Iqbal, R., & Doctor, F. (2020) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2020.3018054 · Cited by 22
Requirements for Data-Driven Reliability Modeling and Simulation of Smart Manufacturing Systems
Friederich, J., Jepsen, S. C., Lazarova‐Molnar, S., & Worm, T. (2021) · Winter Simulation Conference · doi:10.1109/wsc52266.2021.9715410 · Cited by 17
Self-citationTowards Data-Driven Digital Twins for Smart Manufacturing
Francis, D. P., Lazarova‐Molnar, S., & Mohamed, N. (2021) · Lecture notes in networks and systems · doi:10.1007/978-3-030-65796-3_43 · Cited by 13
Self-citationEnhanced Classification of Events for Manufacturing Companies in Supply Networks
Bauer, D., Bauernhansl, T., & Sauer, A. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.03.016 · Cited by 5
Cited by
Hybrid learning-based digital twin for manufacturing process: modeling framework and implementation
Huang, Z., Fey, M., Liu, C., Beysel, E., Xu, X., & Brecher, C. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2023.102545 · Cited by 117
Literature review of digital twin technologies for civil infrastructure
Liu, C., Zhang, P., & Xu, X. (2023) · Journal of Infrastructure Intelligence and Resilience · doi:10.1016/j.iintel.2023.100050 · Cited by 98
Civil Infrastructure Digital Twins: Multi-Level Knowledge Map, Research Gaps, and Future Directions
Naderi, H., & Shojaei, A. (2022) · IEEE Access · doi:10.1109/access.2022.3223557 · Cited by 31
Metadata
- Authors
- Friederich, J., Francis, D. P., Lazarova-Molnar, S., & Mohamed, N.
- Venue
- Computers in Industry
- Publisher
- Elsevier BV
- Published
- 2022-04
- Volume
- 136
- Pages
- 103586
- ISSN
- 0166-3615 (ISSN-L)
- OpenAlex
- W4200612054
- Cited by
- 323
- References
- 53
- FWCI
- 20.78
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.