Fabrication and properties of poly(vinyl alcohol)/β-tricalcium phosphate composite scaffolds via fused deposition modeling for bone tissue engineering
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Polymer/bioceramic composite scaffolds have been widely regarded as promising biomimetic substitutes for bone tissue engineering owing to their tailored mechanical properties and improved bioactivity. Fused deposition modeling (FDM), which is a simple and cost-effective 3D printing technology, enables the fabrication of scaffolds with predetermined and controllable internal architecture. In this study, poly(vinyl alcohol)/β-tricalcium phosphate (PVA/β-TCP) composite scaffolds were constructed using FDM. The thermal behavior, printability, microstructure and mechanical properties of the composite scaffolds were investigated. The results showed that β-TCP particles were homogeneously dispersed into the PVA matrix with the assistance of solid state shear milling. Hydrogen bonding interactions were formed between β-TCP and PVA, which helped to improve the interface strength of the composites. By using water and glycerin as a co-plasticizer, the as-prepared composite filaments that were suitable for the FDM process exhibited improved thermal processability. In addition, the printability window of the material was theoretically established based on the ratio of its compressive modulus to the apparent viscosity. SEM and μCT analyses indicated that as-fabricated scaffolds had well-structured shapes and totally interconnected channels. Meanwhile, the loading-bear capabilities of the composite scaffolds were significantly enhanced with an increase in the β-TCP content up to 20 wt%; e.g., the maximum stress increased from 8.3 to 10.7 kPa. Moreover, in vitro cell culture studies revealed that the resulting composite scaffolds possess good biocompatibility, which is favorable to cell adhesion and proliferation. These results strongly indicate the potential of the fabricated scaffolds in tissue engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems
Szwed-Georgiou, A., Płociński, P., Kupikowska-Stobba, B., Urbaniak, M. M., Rusek-Wala, P., Szustakiewicz, K., Piszko, P., Krupa, A., Biernat, M., Gazińska, M., et al. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00609 · Cited by 269
Various manufacturing methods and ideal properties of scaffolds for tissue engineering applications
Suamte, L., Tirkey, A., Barman, J., & Jayasekhar Babu, P. (2023) · Smart Materials in Manufacturing · doi:10.1016/j.smmf.2022.100011 · Cited by 259
Metadata
- Authors
- Chen, G., Chen, N., & Wang, Q.
- Venue
- Composites Science and Technology
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 172
- Pages
- 17-28
- ISSN
- 0266-3538 (ISSN-L)
- OpenAlex
- W2909111738
- Cited by
- 130
- References
- 1
- FWCI
- 6.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.