The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Elastic properties of 3D printed fibre-reinforced structures
Abstract
Abstract This paper aims to evaluate the elastic properties of fibre-reinforced polymer (FRP) structures printed by three-dimensional (3D) printing technology. Both experimental and theoretical approaches are adopted to investigate the performance of FRP 3D-printed structures and predict their elastic properties. Three types of FRP materials were considered in this study including Carbon, Kevlar and Glass printed in selected arrangements of fibre filaments and Nylon matrix. An analytical model was developed based on the Volume Average Stiffness (VAS) method to predict elastic properties of 3D printed coupons, while the numerical model was developed using Abaqus to predict the failure modes and damage in the FRP 3D-printed coupons tested in this study. A parametric study was carried out to develop the mathematical expressions for calculating elastic properties of FRP 3D-printed structures. The parametric study indicates that the level of fibre reinforcements and their orientation arrangement have significant effects on the structural performance of FRP 3D-printed composite sections.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020) · Composite Structures · doi:10.1016/j.compstruct.2019.111476 · Cited by 678
Shanmugam, V., Rajendran, D. J. J., Babu, K., Rajendran, S., Veerasimman, A., Marimuthu, U., Singh, S., Das, O., Neisiany, R. E., Hedenqvist, M. S., et al. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106925 · Cited by 268
Metadata
- Authors
- Al Abadi, H., Thai, H.-T., Paton-Cole, V., & Patel, V. I.
- Venue
- Composite Structures
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 193
- Pages
- 8-18
- ISSN
- 0263-8223 (ISSN-L)
- OpenAlex
- W2794373177
- Cited by
- 208
- References
- 3
- FWCI
- 9.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
