The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Mechanical properties of structures 3D printed with cementitious powders
Open accessAbstract
The three dimensional (3D) printing technology has undergone rapid development in the last few years and it is now possible to print engineering structures. This paper presents a study of the mechanical behavior of 3D printed structures using cementitious powder. Microscopic observation reveals that the 3D printed products have a layered orthotropic microstructure, in which each layer consists of parallel strips. Compression and flexural tests were conducted to determine the mechanical properties and failure characteristics of such materials. The test results confirmed that the 3D printed structures are laminated with apparent orthotropy. Based on the experimental results, a stress–strain relationship and a failure criterion based on the maximum stress criterion for orthotropic materials are proposed for the structures of 3D printed material. Finally, a finite element analysis was conducted for a 3D printed shell structure, which shows that the printing direction has a significant influence on the load bearing capacity of the structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Mechanics of composite materials
(1999) · Choice Reviews Online · doi:10.5860/choice.36-5715 · Cited by 2,344
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
A review of rapid prototyping technologies and systems
Yan, X., & Gu, P. (1996) · Computer-Aided Design · doi:10.1016/0010-4485(95)00035-6 · Cited by 565
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Measurement of anisotropic compressive strength of rapid prototyping parts
Lee, C. S., Kim, S. G., Kim, H. J., & Ahn, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.11.095 · Cited by 504
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
Advances in three dimensional printing – state of the art and future perspectives
Dimitrov, D., Schreve, K., & de Beer, N. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610670717 · Cited by 446
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378 · cited 1×
“cementitious concrete layer by layer [21], expecting to print a 2,500 square foot building in twenty hours.”
BackgroundThree-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
Food Layered Manufacture: A new process for constructing solid foods
Wegrzyn, T. F., Golding, M., & Archer, R. H. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2012.04.006 · Cited by 199
Deposition Strategies and Resulting Part Stiffnesses in Fused Deposition Modeling
Kulkarni, P., & Dutta, D. (1999) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2830582 · Cited by 115
Advances in Contour Crafting Technology for Extraterrestrial Settlement Infrastructure Buildup
Khoshnevis, B., Thangavelu, M., Yuan, X., & Zhang, J. (2013) · AIAA SPACE Conference & Exposition · doi:10.2514/6.2013-5438 · Cited by 44
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Wangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Metadata
- Authors
- Feng, P., Meng, X., Chen, J.-F., & Ye, L.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2015-09
- Volume
- 93
- Pages
- 486-497
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W877336968
- Cited by
- 369
- References
- 19
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.