The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer
Open accessAbstract
Fly ash sourced from Sarawak, Borneo was alkali-activated by a combination of alkali hydroxides (i.e. NaOH, KOH or Ca(OH)2) and sodium silicate (i.e. industrial or commercial grade Na2SiO3) in this research. A comprehensive overview of the compressive strength of geopolymer due to different alkali activator/fly ash and Na2SiO3/NaOH (Na2SiO3/KOH or Na2SiO3/Ca(OH)2) were studied. The results show that geopolymer made using Sarawak fly ash can be a potential construction material depending on the requirements of workability and compressive strength. The core study of this research was the investigation on the variations of compressive strength due to the oxide molar ratios. The results revealed that higher oxide molar ratios do not necessarily lead to higher compressive strengths. SiO2/Na2O, Al2O3/Na2O, SiO2/K2O and Al2O3/K2O weight ratios had dissimilar effects on the compressive strength of NaOH- and KOH-based geopolymer. The reduction of SiO2/Na2O and Al2O3/Na2O in NaOH- and KOH-based geopolymer using commercial grade Na2SiO3 intensively increased the strength capability. The ratios of SiO2/Na2O and Al2O3/Na2O in Ca(OH)2-based geopolymer were the highest, nevertheless, the compressive strength and workability of Ca(OH)2-based geopolymer were the weakest in comparison to NaOH- and KOH-based geopolymers. Na2O was postulated as the major alkali oxide required for the strength development rather than K2O in both NaOH- and KOH-based geopolymer. However, K2O in KOH-based geopolymer may govern the strength development when Na2O is low in the mixture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
The characterisation of source materials in fly ash-based geopolymers
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)00971-0 · Cited by 416
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Cited by
Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118641 · Cited by 261
Leong, H. Y., Ong, D. E. L., Sanjayan, J. G., & Nazari, A. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002363 · Cited by 102
Self-citationUtilization of industrial waste—Based geopolymers as a soil stabilizer—A review
Sharma, K., & Kumar, A. (2020) · Innovative Infrastructure Solutions · doi:10.1007/s41062-020-00350-7 · Cited by 54
Metadata
- Authors
- Leong, H. Y., Ong, D. E. L., Sanjayan, J. G., & Nazari, A.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2016-03
- Volume
- 106
- Pages
- 500-511
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2217967501
- Cited by
- 234
- References
- 3
- FWCI
- 13.76
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2015.12.141
- The paper
- Leong, H. Y., Ong, D. E. L., Sanjayan, J. G., & Nazari, A. (2016). The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2015.12.141
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.