The DOI matches its Crossref record.
Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature
Abstract
Abstract Slag/fly ash (FA)-based geopolymer cured in ambient temperature as a green alternative to Portland cement is attracting increasing attentions. The fracture properties of slag/FA-based geopolymer concrete (SFGC) was studied by conducting three-point bending (TPB) tests on precut beams. The effects of material parameters including the alkali concentration, the modulus of alkali activator, the slag/FA mass ratio and the liquid/binder ratio on the fracture properties of SFGC were assessed. The results exhibit that the fracture behaviors of SFGC are influenced significantly by the material parameters. The fracture energy and the ultimate load of TPB tests of SFGC beams increase with the increase of the alkali concentration, the modulus of alkali activator as well as the slag/FA ratio while decrease with the increase of liquid/binder ratio. The Bažant and Becq-Giraduon model predicts well whereas the CEB-FIP model underestimates the fracture energy of SFGC beams. Besides, the characteristic length of SFGC decreases with the increase of compressive strength regardless of the mix proportion, and is higher than the prediction for Portland cement concrete (PCC) given the similar compressive strength, suggesting that SFGC might be more ductile. In addition, the relationships between compressive strength, splitting tensile strength, elastic modulus and material parameters of SFGC specimens are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
A review on mixture design methods for geopolymer concrete
Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107490 · Cited by 351
Self-citationLiu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Self-citationLiu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Self-citationFactors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Metadata
- Authors
- Ding, Y., Shi, C.-J., & Li, N.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 190
- Pages
- 787-795
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2893030228
- Cited by
- 165
- References
- 0
- FWCI
- 8.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2018.09.138
- The paper
- Ding, Y., Shi, C.-J., & Li, N. (2018). Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.09.138
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.