The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Abstract
Abstract Energy saving has become a strategic goal in the whole world, that will lead to protect the environment and conserve natural resources. The energy consumption in buildings for heating and cooling is considered as one of the major sources of energy consumption in a lot of countries. Therefore, there is an ongoing search for finding the proper alternatives to preserve energy and minimize energy losses. Subsequently, heat insulators, part of building materials, are steadily getting their importance as a means of saving energy. Although, a lot of insulation materials are used commercially, this part of building construction still faces different difficulties and challenges such as the cost, thermal and mechanical properties, health problems, etc. Current insulation materials used in construction industry are generally polymer based materials such as polystyrene and polyurethane foam. Although these materials have a high performance in thermal insulation, but the environmental impacts in their production processes are significant. Consequently, the researchers find that there is a necessity to develop and come up with insulating materials that possess excellent properties and at the same time, they have less environmental impacts, and are relatively cheap. In this review paper, the researches carried out in the formulation and development of different kinds of thermal insulation in the last decades are presented. The focus was placed on researches utilized of renewable resources and wastes in thermal insulations development. In addition, the light was shed on the composites materials which was developed as a construction material with high thermal insulation capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978 · cited 1×
“After that, Parker equation [129] and Degiovanni equation [130] were used to calculate thermal diffusivity.”
MethodDHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Jelle, B. P. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.05.015 · Cited by 1,196
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,091
Al-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
State of the art in thermal insulation materials and aims for future developments
Papadopoulos, A. M. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.05.006 · Cited by 914
A review on insulation materials for energy conservation in buildings
Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., Muraza, O., & Aditiya, H. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.034 · Cited by 811
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740 · cited 3×
“More durable aerogels, with higher strength and stiffness, can be obtained by proper selection of the silane precursors, and constructing the silica inorganic networks by compounding them with different organic polymers or different fiber networks [103].”
BackgroundNanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Kobayashi, Y., Saito, T., & Isogai, A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405123 · Cited by 566
Sengul, O., Azizi, S., Karaosmanoglu, F., & Tasdemir, M. A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.11.008 · Cited by 560
Wood nanocelluloses: fundamentals and applications as new bio-based nanomaterials
Isogai, A. (2013) · Journal of Wood Science · doi:10.1007/s10086-013-1365-z · Cited by 443
Mechanical properties of pineapple leaf fiber-reinforced polyester composites
Devi, L. U., Bhagawan, S. S., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970531)64:9<1739::aid-app10>3.0.co;2-t · Cited by 426
An environment-friendly thermal insulation material from cotton stalk fibers
Zhou, X.-Y., Zheng, F., Li, H.-G., & Lu, C.-L. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.01.020 · Cited by 426
Advances of thermal conductivity models of nanoscale silica aerogel insulation material
He, Y.-L., & Xie, T. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.013 · Cited by 408
Sütçü, M., & Akkurt, S. (2009) · Ceramics International · doi:10.1016/j.ceramint.2009.02.027 · Cited by 403
Concrete made with recycled tire rubber: Effect of alkaline activation and silica fume addition
Pelisser, F., Zavarise, N., Longo, T. A., & Bernardin, A. M. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.11.014 · Cited by 399
Benmansour, N., Agoudjil, B., Gherabli, A., Kareche, A., & Boudenne, A. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.05.032 · Cited by 394
Aerogels: production, characterization, and applications
Fricke, J., & Tillotson, T. (1997) · Thin Solid Films · doi:10.1016/s0040-6090(96)09441-2 · Cited by 388
Manfredi, L. B., Rodríguez, E. S., Wladyka-Przybylak, M., & Vázquez, A. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.05.003 · Cited by 367
Renewable materials to reduce building heat loss: Characterization of date palm wood
Agoudjil, B., Benchabane, A., Boudenne, A., Ibos, L., & Fois, M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.10.014 · Cited by 341
Villasmil, W., Fischer, L. J., & Worlitschek, J. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.040 · Cited by 329
Patnaik, A., Mvubu, M., Muniyasamy, S., Botha, A., & Anandjiwala, R. D. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.01.056 · Cited by 320
Jute-reinforced polyester composites
Roe, P. J., & Ansell, M. P. (1985) · Journal of Materials Science · doi:10.1007/bf00552393 · Cited by 316
Nanocomposites based on montmorillonite and unsaturated polyester
Kornmann, X., Berglund, L. A., Sterte, J., & Giannelis, E. P. (1998) · Polymer Engineering and Science · doi:10.1002/pen.10305 · Cited by 306
Textile waste as an alternative thermal insulation building material solution
Briga-Sá, A., Nascimento, D., Teixeira, N., Pinto, J., Caldeira, F., Varum, H., & Paiva, A. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.08.037 · Cited by 289
Vacuum insulation panel products: A state-of-the-art review and future research pathways
Kalnæs, S. E., & Jelle, B. P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.11.032 · Cited by 283
A review of bast fibres and their composites. Part 2 – Composites
Summerscales, J., Dissanayake, N., Virk, A., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.020 · Cited by 274
New low-cost insulation particleboards from mixture of durian peel and coconut coir
Khedari, J., Nankongnab, N., Hirunlabh, J., & Teekasap, S. (2004) · Building and Environment · doi:10.1016/j.buildenv.2003.08.001 · Cited by 268
Performance evaluation and research of alternative thermal insulations based on sheep wool
Zach, J., Korjenic, A., Petránek, V., Hroudová, J., & Bednar, T. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.02.014 · Cited by 258
Modified polyester resins for natural fibre composites
AZIZ, S., ANSELL, M., CLARKE, S., & PANTENY, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.08.005 · Cited by 258
de Albuquerque, A. C., Joseph, K., de Carvalho, L. H., & d’Almeida, J. R. M. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00188-8 · Cited by 252
Transient hygrothermal behaviour of a hemp concrete building envelope
Tran Le, A. D., Maalouf, C., Mai, T. H., Wurtz, E., & Collet, F. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.05.016 · Cited by 249
Rosa, I. M. D., Santulli, C., & Fabrizio Sarasini, A. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.030 · Cited by 243
Wood waste as an alternative thermal insulation for buildings
Cetiner, I., & Shea, A. D. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.03.019 · Cited by 243
Experimental investigation of new biocomposite with low cost for thermal insulation
Chikhi, M., Agoudjil, B., Boudenne, A., & Gherabli, A. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.07.019 · Cited by 240
Benazzouk, A., Douzane, O., Mezreb, K., Laidoudi, B., & Quéneudec, M. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.11.011 · Cited by 235
Aerogels as Promising Thermal Insulating Materials: An Overview
Thapliyal, P. C., & Singh, K. (2014) · Journal of Materials · doi:10.1155/2014/127049 · Cited by 228
Thermal insulation enhancement in concretes by adding waste PET and rubber pieces
Yesilata, B., Isıker, Y., & Turgut, P. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.09.014 · Cited by 220
Shimizu, T., Matsuura, K., Furue, H., & Matsuzak, K. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.07.001 · Cited by 218
Fragkos, P., Tasios, N., Paroussos, L., Capros, P., & Tsani, S. (2017) · Energy Policy · doi:10.1016/j.enpol.2016.10.023 · Cited by 218
Thermal insulation material based on SiO2 aerogel
Liu, Z.-H., Ding, Y.-D., Wang, F., & Deng, Z.-P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.096 · Cited by 209
Hwang, C., Tran, V.-A., Hong, J.-W., & Hsieh, Y.-C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.118 · Cited by 207
Manufacture and properties of low-density binderless particleboard from kenaf core
Xu, J., Sugawara, R., Widyorini, R., Han, G., & Kawai, S. (2004) · Journal of Wood Science · doi:10.1007/s10086-003-0522-1 · Cited by 206
Bouguerra, A., Ledhem, A., de Barquin, F., Dheilly, R.-M., & Queneudec, M. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00075-1 · Cited by 205
Abdou, A., & Budaiwi, I. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.02.058 · Cited by 205
Bederina, M., Marmoret, L., Mezreb, K., Khenfer, M. M., Bali, A., & Quéneudec, M. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.12.008 · Cited by 203
Ashour, T., Wieland, H., Georg, H., Bockisch, F.-J., & Wu, W. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.05.026 · Cited by 202
Ultra-low thermal conductivity and high strength of aerogels/fibrous ceramic composites
He, J., Li, X., Su, D., Ji, H., & Wang, X. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.11.021 · Cited by 200
Hanif, A., Diao, S., Lu, Z., Fan, T., & Li, Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.134 · Cited by 197
Sahari, J., Sapuan, S. M., Zainudin, E. S., & Maleque, M. A. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.01.048 · Cited by 183
The development of a monolithic aerogel glazed window for an energy retrofitting project
Berardi, U. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.059 · Cited by 177
Thermal and mechanical characterization of linear low‐density polyethylene/wood flour composites
Marcovich, N. E., & Villar, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12934 · Cited by 177
Sugar cane bagasse fibres reinforced cement composites: Thermal considerations
Potiron, C. O., Passé-Coutrin, N., Toro, F., Silvio Delvasto, A., Bilba, K., & Arsène, M.-A. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.01.002 · Cited by 176
Demilecamps, A., Beauger, C., Hildenbrand, C., Rigacci, A., & Budtova, T. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.022 · Cited by 173
Corn's cob as a potential ecological thermal insulation material
Pinto, J., Paiva, A., Varum, H., Costa, A., Cruz, D., Pereira, S., Fernandes, L., Tavares, P. B., & Agarwal, J. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.04.004 · Cited by 171
Ruiz‐Herrero, J. L., Nieto, D. V., López‐Gil, A., Arranz, Á., Fernández, A., Lorenzana, A., Merino, S., de Saja, J. A., & Rodríguez‐Pérez, M. Á. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.005 · Cited by 167
Shi, J., Lu, L., Guo, W., Zhang, J., & Cao, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.082 · Cited by 161
Production of porous cellulose aerogel fibers by an extrusion process
Karadagli, I., Schulz, B., Schestakow, M., Milow, B., Gries, T., & Ratke, L. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2015.06.011 · Cited by 159
The mechanical, transport and thermal properties of mortar and concrete containing waste cork
Panesar, D. K., & Shindman, B. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.06.003 · Cited by 154
Fly ash–lime–phosphogypsum hollow blocks for walls and partitions
Kumar, S. (2002) · Building and Environment · doi:10.1016/s0360-1323(02)00068-9 · Cited by 154
Rosa, A. D. L., Recca, A., Gagliano, A., Summerscales, J., Latteri, A., Cozzo, G., & Cicala, G. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.054 · Cited by 150
The performance of cotton–kapok fabric–polyester composites
Mwaikambo, L. Y., & Bisanda, E. T. N. (1999) · Polymer Testing · doi:10.1016/s0142-9418(98)00017-8 · Cited by 145
Tuning the Nanocellulose–Borate Interaction To Achieve Highly Flame Retardant Hybrid Materials
Wicklein, B., Kocjan, D., Carosio, F., Camino, G., & Bergström, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00564 · Cited by 140
Straw-reinforced polyester composites
White, N. M., & Ansell, M. P. (1983) · Journal of Materials Science · doi:10.1007/bf01111977 · Cited by 131
Haba, B., Agoudjil, B., Boudenne, A., & Benzarti, K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.025 · Cited by 128
Nosrati, R. H., & Berardi, U. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.079 · Cited by 127
Cellulose Aerogels for Thermal Insulation in Buildings: Trends and Challenges
Illera, D., Mesa, J. A., Gómez, H. A., & Maury, H. (2018) · Coatings · doi:10.3390/coatings8100345 · Cited by 121
Energy and economic analysis of Vacuum Insulation Panels (VIPs) used in non-domestic buildings
Alam, M., Singh, H., Suresh, S., & Redpath, D. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.115 · Cited by 120
Perspective of aerogel glazings in energy efficient buildings
Gao, T., Ihara, T., Grynning, S., Jelle, B. P., & Lien, A. G. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.10.001 · Cited by 119
Sakai, K., Kobayashi, Y., Saito, T., & Isogai, A. (2016) · Scientific Reports · doi:10.1038/srep20434 · Cited by 119
Silkworm cocoon as natural material and structure for thermal insulation
Zhang, J., Rajkhowa, R., Li, J., Liu, X., & Wang, X. G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.02.006 · Cited by 117
Porous sulphur copolymer for gas-phase mercury removal and thermal insulation
Abraham, A. M., Kumar, S. V., & Alhassan, S. M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.069 · Cited by 115
Lachheb, A., Allouhi, A., Marhoune, M. E., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.140 · Cited by 115
Lei, Y., Hu, Z., Cao, B., Chen, X., & Song, H. (2016) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2016.11.064 · Cited by 113
Jia, G., Zhu, L., Liu, P., & Jing, Q. (2017) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2017.12.047 · Cited by 110
Coconut-fiber-reinforced thermosetting plastics
Owolabi, O., Czvikovszky, T., & Kovács, I. A. (1985) · Journal of Applied Polymer Science · doi:10.1002/app.1985.070300504 · Cited by 109
Plastic waste management in construction: technological and institutional issues
Rebeiz, K. S., & Craft, A. P. (1995) · Resources Conservation and Recycling · doi:10.1016/0921-3449(95)00034-8 · Cited by 108
Sustainable acoustic and thermal insulation materials from elastomeric waste residues
Benkreira, H., Khan, A., & Horoshenkov, K. V. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.05.047 · Cited by 108
Ibrahim, M., Biwolé, P. H., Achard, P., Wurtz, É., & Ansart, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.090 · Cited by 108
Yue, X., Zhang, T., Yang, D., Qiu, F., Li, Z., Wei, G., & Qiao, Y. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.10.009 · Cited by 107
Literature Review of High Performance Thermal Insulation
Berge, A., & Johansson, P. (2012) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 105
Lertsutthiwong, P., Khunthon, S., Siralertmukul, K., Noomun, K., & Chandrkrachang, S. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2007.09.051 · Cited by 104
Gas-filled panels for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., Gustavsen, A., & Grynning, S. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.06.019 · Cited by 102
Yu, H., Jiang, Y., Lu, Y., Li, X., Zhao, H., Ji, Y., & Wang, M. (2018) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.10.039 · Cited by 101
Lam, N. T., Chollakup, R., Smitthipong, W., Nimchua, T., & Sukyai, P. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.02.031 · Cited by 100
Limam, A., Zerizer, A., Quenard, D., Sallée, H., & Chenak, A. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.01.007 · Cited by 96
Thermo physical characterisation of recycled textile materials used for building insulating
Hadded, A., Benltoufa, S., Fayala, F., & Jemni, A. (2015) · Journal of Building Engineering · doi:10.1016/j.jobe.2015.10.007 · Cited by 91
Nocentini, K., Achard, P., Biwolé, P. H., & Stipetić, M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.024 · Cited by 90
Porous thermal insulation materials derived from fly ash using a foaming and slip casting method
Zhang, R., Feng, J., Cheng, X., Gong, L., Li, Y., & Zhang, H. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.06.028 · Cited by 85
Mahadik, D. B., Lee, Y., Chavan, N. K., Mahadik, S. A., & Park, H. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2015.08.020 · Cited by 79
Becchio, C., Corgnati, S. P., Kindinis, A., & Pagliolico, S. L. (2009) · Energy and Buildings · doi:10.1016/j.enbuild.2009.05.013 · Cited by 79
Ecological, thermal and acoustical insulating composite from hemp shives and sapropel binder
Balčiūnas, G., Žvironaitė, J., Vėjelis, S., Jagniatinskis, A., & Gaidučis, S. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.06.034 · Cited by 78
Duan, P., Song, L., Yan, C., Ren, D., & Li, Z. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.01.025 · Cited by 76
Super insulated aerogel windows: Impact on daylighting and thermal performance
Garnier, C., Muneer, T., & McCauley, L. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.08.009 · Cited by 73
Aerogel blankets: From mathematical modeling to material characterization and experimental analysis
Hoseini, A., McCague, C., Andisheh-Tadbir, M., & Bahrami, M. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.11.030 · Cited by 72
Innovative use of giant reed and cork residues for panels of buildings in Mediterranean area
Barreca, F., Gabarrón, A. M., Yepes, J. A. F., & Pérez, J. J. P. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.005 · Cited by 71
da Rosa, L. C., Santor, C. G., Lovato, A., da Rosa, C. S., & Güths, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.127 · Cited by 69
Serrano, Á., Borreguero, A. M., Garrido, I., Rodríguez, J. F., & Carmona, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.098 · Cited by 69
Zhang, R., Ye, C., Hou, X., Li, S., & Wang, B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.06.118 · Cited by 69
Effects of moisture on thermal conductivity of the lightened construction material
Belkharchouche, D., & Chaker, A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.01.160 · Cited by 60
Piszczyk, Ł., Hejna, A., Formela, K., Danowska, M., & Strankowski, M. (2014) · Iranian Polymer Journal · doi:10.1007/s13726-014-0301-4 · Cited by 59
Characterization and engineering application of a novel ceramic composite insulation material
Xu, S., Chen, L., Gong, M., Hu, X., Zhang, X., & Zhou, Z. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.12.010 · Cited by 55
Thermal conductivity of hygroscopic foams based on cellulose nanofibrils and a nonionic polyoxamer
Apostolopoulou‐Kalkavoura, V., Gordeyeva, K. S., Lavoine, N., & Bergström, L. (2017) · Cellulose · doi:10.1007/s10570-017-1633-y · Cited by 55
Stability investigations of the thermal insulating performance of aerogel blanket
Lakatos, Á. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2018.12.029 · Cited by 55
Pal, S. K., Mukhopadhyay, D., Sanyal, S., & Mukherjea, R. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350412 · Cited by 54
Damfeu, J. C., Meukam, P., & Jannot, Y. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.02.007 · Cited by 52
Restructure of expanded cork with fumed silica as novel core materials for vacuum insulation panels
Zhuang, J., Ghaffar, S. H., Fan, M., & Corker, J. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.06.019 · Cited by 52
Wuzella, G., Mahendran, A. R., Bätge, T., Jury, S., & Kandelbauer, A. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.01.008 · Cited by 47
Analysis of perlite and pumice based building insulation materials
Celik, S., Family, R., & Mengüç, M. P. (2016) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.02.015 · Cited by 46
Experimental study on thermal behavior of a building structure using rubberized exterior-walls
Yeşilata, B., Bulut, H., & Turğut, P. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.09.031 · Cited by 44
Brick and mortar treatment by cream emulsion for improved water repellence and thermal insulation
MacMullen, J., Zhang, Z., Rirsch, E., Dhakal, H. N., & Bennett, N. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.014 · Cited by 42
Liao, Y., Wu, X., Wang, Z., et al. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.01.041 · Cited by 41
Utilization of various non-woven waste forms as reinforcement in polymeric composites
Yalçın-Eniş, İ., Sadikoğlu, T. G., Berkalp, Ö. B., & Bakkal, M. (2013) · Textile Research Journal · doi:10.1177/0040517512474366 · Cited by 38
Yoo, S., Kandare, E., Shanks, R. A., Al‐Maadeed, M. A. A., & Khatibi, A. A. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.09.003 · Cited by 35
Ng, S., Jelle, B. P., Sandberg, L. I. C., Gao, T., & Mofid, S. A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.054 · Cited by 31
Kilar, V., Koren, D., & Bosiljkov, V. B. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.09.013 · Cited by 30
Li, Z., Gao, H., & Wang, Q. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34233 · Cited by 18
Degiovanni, A., Sinicki, G., & Laurent, M. (1985) · Springer eBooks · doi:10.1007/978-1-4684-4916-7_50 · Cited by 7
Chemical and Mechanical Treatment of Banana Waste to Develop an Efficient Insulating Material
Parkash, A. (2015) · Biochemistry & Analytical Biochemistry · doi:10.4172/2161-1009.1000220 · Cited by 7
Cited by
Comparative analysis of building insulation material properties and performance
Kumar, D., Alam, M., Zou, P. X. W., Sanjayan, J. G., & Memon, R. A. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110038 · Cited by 501
Structure-properties relationships of cellular materials from biobased polyurethane foams
Peyrton, J., & Avérous, L. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100608 · Cited by 282
Rabbat, C., Awad, S., Villot, A., Rollet, D., & Andrès, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111962 · Cited by 183
Evaluation of rubber powder waste as reinforcement of the polyurethane derived from castor oil
Silva, N. G. S., Cortat, L. I. C. O., Orlando, D., & Mulinari, D. R. (2020) · Waste Management · doi:10.1016/j.wasman.2020.07.032 · Cited by 66
Wang, R., Qiao, G., & Song, G. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132051 · Cited by 54
Metadata
- Authors
- Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 214
- Pages
- 709-735
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2940979243
- Cited by
- 638
- References
- 121
- FWCI
- 33.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.