Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction
Open accessThe DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Abstract
This paper presents the systematic development and performance characterization of a non-proprietary 3D-printable ultra-high-performance fiber-reinforced concrete (UHPFRC). Several fresh and hardened state properties of the 3D-printable UHPFRC matrix (without fiber) and composite (with 2% volume fraction of steel fibers) were evaluated and compared to that of conventionally mold-cast UHPFRC. Additionally, the effects of test direction on the compressive strength and modulus of rupture of the printed UHPFRC were investigated. The fresh properties of the UHPFRC developed in this study satisfied the criteria for extrudability, buildability, and shape-retention-ability, which are relevant for ensuring printability. The printed UHPFRC exhibited superior flexural performance to the mold-cast UHPFRC due to alignment of the short fibers in the printing direction. The high compressive and flexural strengths, along with the deflection-hardening behavior, of the developed UHPFRC can enable the production of thin 3D-printed components with significant reduction or complete elimination of conventional steel bars.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Self-citationWangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Ma, G., Li, Z., Li, W., Wang, F., & Sanjayan, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.008 · Cited by 610
Self-citationNerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 567
Rheological and harden properties of the high-thixotropy 3D printing concrete
Zhang, Y., Zhang, Y., She, W., Yang, L. H., Liu, G., & Yang, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.061 · Cited by 475
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Self-citationPredictive Process Control of Crowded Particulate Suspensions: Applied to Ceramic Manufacturing
Dinger, D. R., & Funk, J. E. (1993) · Medical Entomology and Zoology · Cited by 314
Kang, S. T., Lee, B. Y., Kim, J.-K., & Kim, Y. Y. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.057 · Cited by 313
Rheology of fiber reinforced cementitious materials: classification and prediction
Martinie, L., Rossi, P., & Roussel, N. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.032 · Cited by 312
3D printing of earth-based materials: Processing aspects
Perrot, A., Rangeard, D., & Courteille, E. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.017 · Cited by 310
Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108088 · Cited by 305
Self-citationExtrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Marchment, T., Sanjayan, J., & Xia, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107684 · Cited by 281
Self-citationSimple tools for fiber orientation prediction in industrial practice
Martinie, L., & Roussel, N. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.008 · Cited by 239
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
Nematollahi, B., Sanjayan, J., Qiu, J., & Yang, E.-H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.117 · Cited by 223
Self-citationCurrent Progress of 3D Concrete Printing Technologies
Nematollahi, B., Xia, M., & Sanjayan, J. (2017) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2017/0035 · Cited by 220
Self-citationMatrix design of strain hardening fiber reinforced engineered geopolymer composite
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.11.039 · Cited by 199
Self-citationAn integral design concept for ecological self-compacting concrete
Hunger, M. (2010) · TU/e Research Portal · doi:10.6100/ir674188 · Cited by 179
Comparative deflection hardening behavior of short fiber reinforced geopolymer composites
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.085 · Cited by 171
Self-citationBong, S. H., Nematollahi, B., Nazari, A., Xia, M., & Sanjayan, J. (2019) · Materials · doi:10.3390/ma12060902 · Cited by 147
Self-citationMaterial Design and Performance Evaluation of Foam Concrete for Digital Fabrication
Markin, S., Nerella, V. N., Schröfl, C., Guseynova, G., & Mechtcherine, V. (2019) · Materials · doi:10.3390/ma12152433 · Cited by 96
Yu, J., & Leung, C. K. Y. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_24 · Cited by 43
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Ye, J., Cui, C., Yu, J., Yu, K., & Dong, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122586 · Cited by 262
Sharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- Arunothayan, A. R., Nematollahi, B., Ranade, R., Bong, S. H., & Sanjayan, J.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 257
- Pages
- 119546
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2990427106
- Cited by
- 347
- References
- 34
- FWCI
- 22.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.